Boosted Performance round 2 list

Joepro · 05-12-2014, 07:34 PM

My afr doesn't really have anything to due with running out fuel...even at wastegate pressure he took fuel out to make more power went from 10.2 @wot to 11.3 ish. I dont have data yet to say I am not but 11.5 at wot is the target afr, as boost declines it will slightly richen up, your too rich imo, I trust Vince if he felt the fuel system is an issue he would say im sure, call him he will lay this to rest with all the answers. I believe I am the 3rd bp kit he has tuned and rt does the base maps. Maybe I missed it what is,the concern? If you plan on running higher boost you need a built motor to be safe...or 1ks for e85. Vince said he was ok with 480 tq on these motors no higher...remember tq breaks stuff not hp.

GaleForce · 05-12-2014, 07:39 PM

Quote:

Originally Posted by Joepro

Gfb gforce 2. Also I forgot the oil filter number almost ready for my first change.

M1-102 Mobile 1

Joepro · 05-12-2014, 07:41 PM

Thought it was 102...I did remember! Ty gale.

jwick · 05-12-2014, 09:49 PM

Quote:

Originally Posted by GaleForce

M1-102 Mobile 1

Gale. It's the same filter for the GReddy relocation thermostat plate too.

GaleForce · 05-12-2014, 11:39 PM

Quote:

Originally Posted by Joepro

Thought it was 102...I did remember! Ty gale.

I just bought one two days ago... That and I have a picture of the original oil filter box saved on my phone. My phone is my memory, I just have to remember what's saved on it.

Quote:

Originally Posted by jwick

Gale. It's the same filter for the GReddy relocation thermostat plate too.

I assumed it would be the same. Thanks for verifying.

TopgunZ · 05-13-2014, 12:36 PM

I have a strange vibration in my gas pedal when accelerating. Its very defined and more like a fast rattle. I notice it is worse when turning to the right. It gets more prominent when going into boost also. This wasn't there until after the dyno.

Anybody have any ideas how this might have came about or what can be causing this?

Mitco39 · 05-13-2014, 12:51 PM

Check the piping for rubbing anywhere along the frame.

Plasmite · 05-13-2014, 12:59 PM

I don't have the service manual on this computer. Isn't the throttle mostly electronic?

TopgunZ · 05-13-2014, 01:03 PM

It is electronic but there is still a mechanism to attach it to the vehicle. I haven't lifted it back up yet to check but from what I can remember it wasn't touching anything at all.

Upon install the manifold was touching a mounting tab off the bell housing but I sawed that off and there is now a good 1/4"-1/2" clearance to it.

Plasmite · 05-13-2014, 01:11 PM

Mitco has the right idea

Mitco39 · 05-13-2014, 01:28 PM

TopGunz,

Has it been colder lately in your parts?

Chuck33079 · 05-13-2014, 01:46 PM

The flex joints flex more after a few heat cycles, don't they? Could something be rubbing now that wasn't at the time of install because of that? It's been a couple of weeks since I've been under a car with one of these.

TopgunZ · 05-13-2014, 02:11 PM

[QUMitco39;2816903]TopGunz,

Has it been colder lately in your parts?[/QUOTE]

Yes it has. We had 6"s of random snow on Sunday.

Quote:

Originally Posted by Chuck33079

The flex joints flex more after a few heat cycles, don't they? Could something be rubbing now that wasn't at the time of install because of that? It's been a couple of weeks since I've been under a car with one of these.

It definitely got the car hotter than it had ever been while on the dyno. Maybe the heat cycle settled some piping. Ill look it all over this weekend.

zguynate · 05-13-2014, 05:47 PM

Quote:

Originally Posted by TopgunZ

I have a strange vibration in my gas pedal when accelerating. Its very defined and more like a fast rattle. I notice it is worse when turning to the right. It gets more prominent when going into boost also. This wasn't there until after the dyno.

Anybody have any ideas how this might have came about or what can be causing this?

I had the same thing that happened. Check on the drivers side by the left wastegate. There is a stud that holds a heat shield on that came in contact with my wastegate clamp. I trimmed it with a Dremel and had no issues since. It was very noticeable on the pedal for some reason.

jwick · 05-13-2014, 06:16 PM

Quote:

Originally Posted by dragonbreath

I had the same thing that happened. Check on the drivers side by the left wastegate. There is a stud that holds a heat shield on that came in contact with my wastegate clamp. I trimmed it with a Dremel and had no issues since. It was very noticeable on the pedal for some reason.

I think we cut that one too as I remember Chuck (can you confirm?) cutting the one by the turbo and another as I was messing with the turbo coupler.

05-12-2014, 07:34 PM	#1441 (permalink)
Joepro A True Z Fanatic Join Date: Aug 2012 Location: Athens ohio Posts: 1,213 Drives: Company car Rep Power: 34	My afr doesn't really have anything to due with running out fuel...even at wastegate pressure he took fuel out to make more power went from 10.2 @wot to 11.3 ish. I dont have data yet to say I am not but 11.5 at wot is the target afr, as boost declines it will slightly richen up, your too rich imo, I trust Vince if he felt the fuel system is an issue he would say im sure, call him he will lay this to rest with all the answers. I believe I am the 3rd bp kit he has tuned and rt does the base maps. Maybe I missed it what is,the concern? If you plan on running higher boost you need a built motor to be safe...or 1ks for e85. Vince said he was ok with 480 tq on these motors no higher...remember tq breaks stuff not hp. Mitco39 likes this. __________________ Swift\|Koni\|SPC\| FI CBE\|Z1\|Stillen\|Sbend\|Zspeed\|R/T Tuned\|523 whp\|458 tq\|10.5 psi\|SOLD Joepro's Journal\|Joepro's Boosted Performance Build \|Pittsburgh-Western-Pa-Ohio-Wv-Group Last edited by Joepro; 05-12-2014 at 07:41 PM.

05-12-2014, 07:41 PM	#1443 (permalink)
Joepro A True Z Fanatic Join Date: Aug 2012 Location: Athens ohio Posts: 1,213 Drives: Company car Rep Power: 34	Thought it was 102...I did remember! Ty gale. __________________ Swift\|Koni\|SPC\| FI CBE\|Z1\|Stillen\|Sbend\|Zspeed\|R/T Tuned\|523 whp\|458 tq\|10.5 psi\|SOLD Joepro's Journal\|Joepro's Boosted Performance Build \|Pittsburgh-Western-Pa-Ohio-Wv-Group

05-13-2014, 12:36 PM	#1446 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	I have a strange vibration in my gas pedal when accelerating. Its very defined and more like a fast rattle. I notice it is worse when turning to the right. It gets more prominent when going into boost also. This wasn't there until after the dyno. Anybody have any ideas how this might have came about or what can be causing this? __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

05-13-2014, 12:51 PM	#1447 (permalink)
Mitco39 A True Z Fanatic Join Date: Aug 2012 Location: Edmonton Alberta Canada Posts: 2,089 Drives: 40th 370z Rep Power: 132	Check the piping for rubbing anywhere along the frame. Plasmite likes this. __________________ 2007 Chevy Duramax - EFILive Tuned By Me 2010 40th W/ Nav - Boosted Performance - UpRev Tuned By Me The Mrs. Ride -2012 335XI N55 BMW - Cobb Tuned By Me, Built by her My Build --> http://www.the370z.com/members-370z-...39s-build.html

05-13-2014, 12:59 PM	#1448 (permalink)
Plasmite Enthusiast Member Join Date: Aug 2012 Location: Canada Posts: 259 Drives: '12 M6 Panty Peeler Rep Power: 13	I don't have the service manual on this computer. Isn't the throttle mostly electronic? __________________ WISHLIST

05-13-2014, 01:03 PM	#1449 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	It is electronic but there is still a mechanism to attach it to the vehicle. I haven't lifted it back up yet to check but from what I can remember it wasn't touching anything at all. Upon install the manifold was touching a mounting tab off the bell housing but I sawed that off and there is now a good 1/4"-1/2" clearance to it. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

05-13-2014, 01:11 PM	#1450 (permalink)
Plasmite Enthusiast Member Join Date: Aug 2012 Location: Canada Posts: 259 Drives: '12 M6 Panty Peeler Rep Power: 13	Mitco has the right idea __________________ WISHLIST

05-13-2014, 01:28 PM	#1451 (permalink)
Mitco39 A True Z Fanatic Join Date: Aug 2012 Location: Edmonton Alberta Canada Posts: 2,089 Drives: 40th 370z Rep Power: 132	TopGunz, Has it been colder lately in your parts? __________________ 2007 Chevy Duramax - EFILive Tuned By Me 2010 40th W/ Nav - Boosted Performance - UpRev Tuned By Me The Mrs. Ride -2012 335XI N55 BMW - Cobb Tuned By Me, Built by her My Build --> http://www.the370z.com/members-370z-...39s-build.html

05-13-2014, 01:46 PM	#1452 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	The flex joints flex more after a few heat cycles, don't they? Could something be rubbing now that wasn't at the time of install because of that? It's been a couple of weeks since I've been under a car with one of these. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Boosted Performance single turbo build	Boosted Performance	Forced Induction	1841	09-06-2016 12:17 PM
Boosted Performance single turbo results	Boosted Performance	Forced Induction	136	06-18-2014 06:40 PM
2012 Option List Includes Dealer-Installed Performance	SeattleLion	Nissan 370Z General Discussions	3	10-08-2011 03:21 PM
Come support A.M. Performance at the Laguna Seca Grand Am round next weekend!!!!!!!	Mike@AMPerformance	Nissan 370Z General Discussions	16	07-14-2011 12:47 AM
Come support A.M. Performance at the Laguna Seca Grand Am round next weekend!!!!!!!	Mike@AMPerformance	Northern California Region	0	07-01-2011 08:13 PM