Boosted Performance round 2 list

Joepro · 04-14-2014, 08:20 PM

Happy to see upgrades but almost makes me wish I waited! Could be an option if I ever decide to go back to the OEM headers and sell the Z1 headers...I like the idea of less oil lines!
this should make the IC pipe a little shorter, wonder if it will help spool times, not that it is slow haha! BTW I am extremely confident in both the kit and reliability after the torture testing of a dyno session with Vince!

for your viewing pleasure:

and with 200 hp less

zguynate · 04-14-2014, 09:35 PM

^^Awesome!

I finally got my Z 100% done. I had to do some gauges and finish up some exhaust work. I took it for a drive tonight and all seems well. I got that minor oil leak on the turbo oil reservoir resolved. A little thread tape fixed it. I have a couple of issues though that I will have to look at tomorrow or Wednesday. At lower RPMs I have a vibration in the drivers side floor board near my gas pedal. It doesnt do it all the time though. When it does its very noticible. I have no idea what it is at the moment. It could very well be something unrelated to the kit. Also I have a rev hang at around 1200 RPMs after the car gets nice and warmed up. If I push in the clutch and let the revs drop, it will drop, hover around 1200 RPMs, then drop slowly to regular idle. Idk if thats a tune issue that can be fixed or if its some sort of vacuum leak. Any ideas my fellow gentlemen?

jwick · 04-14-2014, 10:32 PM

Nice to hear you completed it. Welcome to the completed club, hope to join you this weekend.

I bet all of us have a long period of time where every little thing out of the norm we think is an issue with what we did to the car.

Sent from my SPH-L710 using Tapatalk

TopgunZ · 04-15-2014, 01:40 AM

True. I try to remember there are lots of guys that pay shops to install a cat back exhaust. Then I don't feel like such a rookie when something doesn't come out just right.

jwick · 04-15-2014, 07:34 AM

Quote:

Originally Posted by TopgunZ

True. I try to remember there are lots of guys that pay shops to install a cat back exhaust. Then I don't feel like such a rookie when something doesn't come out just right.

Yeah I don't understand that either but I guess some people just don't feel comfortable or don't know how to work on a car. I do everything myself unless I look at it and determine it's not worth a weekend of work for a couple hundred bucks savings (i.e. diff bushing - those were well worth the labor I paid to get them done).

bmarcinczyk14 · 04-16-2014, 10:35 AM

What are the pros and cons with a single turbo setup (like this BP kit) vs. a twin turbo (like FI kit). I know in the past single turbos were notorious for turbo lag, is this as much the case anymore?

jlo370z · 04-16-2014, 10:37 AM

Quote:

Originally Posted by bmarcinczyk14

What are the pros and cons with a single turbo setup (like this BP kit) vs. a twin turbo (like FI kit). I know in the past single turbos were notorious for turbo lag, is this as much the case anymore?

See me next week after my tune, and ill take you for a ride in mine

TopgunZ · 04-16-2014, 10:42 AM

Ok. I feel like a moron. Maybe because I punched myself in the face last night after slipping off a wrench for a final tighten down of everything. But I cant figure out how to hook up my wastegates with a manual boost controller.

The two bottom barbs T together and go to the drivers side intake pipe nipple.

The two top barbs T together and go to the intake of the boost controller.

So where does the out of the boost controller go?

Boosted Performance · 04-16-2014, 10:42 AM

Quote:

Originally Posted by bmarcinczyk14

What are the pros and cons with a single turbo setup (like this BP kit) vs. a twin turbo (like FI kit). I know in the past single turbos were notorious for turbo lag, is this as much the case anymore?

Here is the result from the last customer (couple of days ago) that dynoed wit this kit....10psi and 400ft/tq at the wheels at 3,500 wouldn't be considered as "lag" in my books:

bmarcinczyk14 · 04-16-2014, 10:56 AM

Quote:

Originally Posted by jlo370z

See me next week after my tune, and ill take you for a ride in mine

I may have to hold ya to that

jwick · 04-16-2014, 11:16 AM

Quote:

Originally Posted by TopgunZ

Ok. I feel like a moron. Maybe because I punched myself in the face last night after slipping off a wrench for a final tighten down of everything. But I cant figure out how to hook up my wastegates with a manual boost controller.

The two bottom barbs T together and go to the drivers side intake pipe nipple.

The two top barbs T together and go to the intake of the boost controller.

So where does the out of the boost controller go?

Tee off the charge pipe line that you are running to the bottom of the waste gates. I would recommend pretty close to the original intake pipe takeoff.

You could also tap the charge pipe for an additional barb if you want a new pressure source.

jwick · 04-16-2014, 11:18 AM

Quote:

Originally Posted by TopgunZ

Ok. I feel like a moron. Maybe because I punched myself in the face last night after slipping off a wrench for a final tighten down of everything. But I cant figure out how to hook up my wastegates with a manual boost controller.

The two bottom barbs T together and go to the drivers side intake pipe nipple.

The two top barbs T together and go to the intake of the boost controller.

So where does the out of the boost controller go?

PM me your cell number and I'll shoot you a sketch of how I'm going to plumb mine. It's for a EBC but there is no difference between the manual and solenoid valve in the plumbing configuration with my Profec.

Boosted Performance · 04-16-2014, 11:35 AM

Quote:

Originally Posted by TopgunZ

Ok. I feel like a moron. Maybe because I punched myself in the face last night after slipping off a wrench for a final tighten down of everything. But I cant figure out how to hook up my wastegates with a manual boost controller.

The two bottom barbs T together and go to the drivers side intake pipe nipple.

The two top barbs T together and go to the intake of the boost controller.

So where does the out of the boost controller go?

Thought you got it after the conversation yesterday...

Maybe this will help:

fuct · 04-16-2014, 11:59 AM

^^ nice little diagram!

TopgunZ · 04-16-2014, 12:35 PM

Quote:

Originally Posted by Boosted Performance

Thought you got it after the conversation yesterday...

Maybe this will help:

I know! But then I read the hallman install pdf and it had a diagram that said to never hook up anything to the upper ports and they should always vent to atmosphere. So again I was confused. I didn't want to bother you again so I just left it for tonight.

Great diagram though. It just contradicts hallmans website.

04-14-2014, 08:20 PM	#1231 (permalink)
Joepro A True Z Fanatic Join Date: Aug 2012 Location: Athens ohio Posts: 1,213 Drives: Company car Rep Power: 34	Happy to see upgrades but almost makes me wish I waited! Could be an option if I ever decide to go back to the OEM headers and sell the Z1 headers...I like the idea of less oil lines! this should make the IC pipe a little shorter, wonder if it will help spool times, not that it is slow haha! BTW I am extremely confident in both the kit and reliability after the torture testing of a dyno session with Vince! for your viewing pleasure: and with 200 hp less jlo370z likes this. __________________ Swift\|Koni\|SPC\| FI CBE\|Z1\|Stillen\|Sbend\|Zspeed\|R/T Tuned\|523 whp\|458 tq\|10.5 psi\|SOLD Joepro's Journal\|Joepro's Boosted Performance Build \|Pittsburgh-Western-Pa-Ohio-Wv-Group Last edited by Joepro; 04-14-2014 at 08:43 PM.

04-14-2014, 09:35 PM	#1232 (permalink)
zguynate A True Z Fanatic Join Date: Jan 2012 Location: Strangeland Posts: 1,054 Drives: 09 370z Rep Power: 73	^^Awesome! I finally got my Z 100% done. I had to do some gauges and finish up some exhaust work. I took it for a drive tonight and all seems well. I got that minor oil leak on the turbo oil reservoir resolved. A little thread tape fixed it. I have a couple of issues though that I will have to look at tomorrow or Wednesday. At lower RPMs I have a vibration in the drivers side floor board near my gas pedal. It doesnt do it all the time though. When it does its very noticible. I have no idea what it is at the moment. It could very well be something unrelated to the kit. Also I have a rev hang at around 1200 RPMs after the car gets nice and warmed up. If I push in the clutch and let the revs drop, it will drop, hover around 1200 RPMs, then drop slowly to regular idle. Idk if thats a tune issue that can be fixed or if its some sort of vacuum leak. Any ideas my fellow gentlemen? __________________ 2009 370z touring w/sports package

04-14-2014, 10:32 PM	#1233 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465056	Nice to hear you completed it. Welcome to the completed club, hope to join you this weekend. I bet all of us have a long period of time where every little thing out of the norm we think is an issue with what we did to the car. Sent from my SPH-L710 using Tapatalk __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

04-15-2014, 01:40 AM	#1234 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	True. I try to remember there are lots of guys that pay shops to install a cat back exhaust. Then I don't feel like such a rookie when something doesn't come out just right. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

04-16-2014, 10:35 AM	#1236 (permalink)
bmarcinczyk14 Track Member Join Date: Jul 2009 Location: Chicago Posts: 505 Drives: 2010 370z 6spd Sport Rep Power: 17	What are the pros and cons with a single turbo setup (like this BP kit) vs. a twin turbo (like FI kit). I know in the past single turbos were notorious for turbo lag, is this as much the case anymore? __________________ '10 370z -- '09 Ducati 848 -- '05 Kawasaki 636 Track Bike -- '02 Sentra SE-R Spec V

04-16-2014, 10:42 AM	#1238 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	Ok. I feel like a moron. Maybe because I punched myself in the face last night after slipping off a wrench for a final tighten down of everything. But I cant figure out how to hook up my wastegates with a manual boost controller. The two bottom barbs T together and go to the drivers side intake pipe nipple. The two top barbs T together and go to the intake of the boost controller. So where does the out of the boost controller go? __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

04-16-2014, 11:59 AM	#1244 (permalink)
fuct A True Z Fanatic Join Date: May 2009 Location: Sugar Land Posts: 3,692 Drives: 97' Ranger :) Rep Power: 24	^^ nice little diagram!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Boosted Performance single turbo build	Boosted Performance	Forced Induction	1841	09-06-2016 12:17 PM
Boosted Performance single turbo results	Boosted Performance	Forced Induction	136	06-18-2014 06:40 PM
2012 Option List Includes Dealer-Installed Performance	SeattleLion	Nissan 370Z General Discussions	3	10-08-2011 03:21 PM
Come support A.M. Performance at the Laguna Seca Grand Am round next weekend!!!!!!!	Mike@AMPerformance	Nissan 370Z General Discussions	16	07-14-2011 12:47 AM
Come support A.M. Performance at the Laguna Seca Grand Am round next weekend!!!!!!!	Mike@AMPerformance	Northern California Region	0	07-01-2011 08:13 PM