Boosted Performance round 2 list

biggestsack · 04-13-2014, 10:48 AM

Does anyone know if the BP kit will fit around the new Z1 CSC eliminator?

I've been looking at both the BP install manual and the Z1 CSC manual and having trouble determining from the provided images.

jwick · 04-13-2014, 11:42 AM

Quote:

Originally Posted by biggestsack

Does anyone know if the BP kit will fit around the new Z1 CSC eliminator?

I've been looking at both the BP install manual and the Z1 CSC manual and having trouble determining from the provided images.

I'm leaning toward no. I took a bunch of pictures during the hot side install yesterday. I'll dig through them today and see if I have any good pics showing that location. Sasha has done a really good job of tuckong everything up as close to the car as possible. You can barely get your finger between the crossover pipe and the tranny.

Sent from my SPH-L710 using Tapatalk

biggestsack · 04-13-2014, 02:54 PM

Quote:

Originally Posted by jwick

I'm leaning toward no. I took a bunch of pictures during the hot side install yesterday. I'll dig through them today and see if I have any good pics showing that location. Sasha has done a really good job of tuckong everything up as close to the car as possible. You can barely get your finger between the crossover pipe and the tranny.

Sent from my SPH-L710 using Tapatalk

Cool, I guess I'll be going the Zspeed route. Good luck with finishing up your build!

TopgunZ · 04-13-2014, 04:28 PM

Quote:

Originally Posted by jwick

I'm leaning toward no. I took a bunch of pictures during the hot side install yesterday. I'll dig through them today and see if I have any good pics showing that location. Sasha has done a really good job of tuckong everything up as close to the car as possible. You can barely get your finger between the crossover pipe and the tranny.

Sent from my SPH-L710 using Tapatalk

Finger? Mines up against it. And what did you guys do with the yellow wire off the scavage pump wiring?

jwick · 04-13-2014, 04:30 PM

Quote:

Originally Posted by TopgunZ

Finger? Mines up against it. And what did you guys do with the yellow wire off the scavage pump wiring?

If I recall properly, nothing, but I haven't got there yet

Sent from my SPH-L710 using Tapatalk

TopgunZ · 04-13-2014, 04:55 PM

Quote:

Originally Posted by jwick

If I recall properly, nothing, but I haven't got there yet

Sent from my SPH-L710 using Tapatalk

So if it's in the harness, what kind of power is it seeing? It would be awesome if it has ignition power only for some gauge hookups!

Hey Jwick, hows your build coming?

09nismo498 · 04-13-2014, 08:05 PM

Quote:

Originally Posted by TopgunZ

Finger? Mines up against it. And what did you guys do with the yellow wire off the scavage pump wiring?

Mine is resting on the trans as well. I haven't started it yet, but I'm really hoping it doesn't rattle or cause another problem. If it does, I'm not really sure what to do, because theres no way to adjust it any lower, I already tried twice.

jwick · 04-13-2014, 08:09 PM

Quote:

Originally Posted by 09nismo498

Mine is resting on the trans as well. I haven't started it yet, but I'm really hoping it doesn't rattle or cause another problem. If it does, I'm not really sure what to do, because theres no way to adjust it any lower, I already tried twice.

Where is it hitting? I don't recall mine is anywhere but I'll double check it Thursday when I get back at it.

09nismo498 · 04-13-2014, 08:16 PM

Quote:

Originally Posted by jwick

Where is it hitting? I don't recall mine is anywhere but I'll double check it Thursday when I get back at it.

It's hitting on a small piece of the transmission housing that sticks out. I thought about grinding it down, but it looks like it may be where a shift fork rod sits or something. I don't have a picture at the moment or I would show you. its right on the bottom of the transmission you can't miss it.

TopgunZ · 04-13-2014, 10:20 PM

Quote:

Originally Posted by 09nismo498

It's hitting on a small piece of the transmissiwayhousing that sticks out. I thought about grinding it down, but it looks like it may be where a shift fork rod sits or something. I don't have a picture at the moment or I would show you. its right on the bottom of the transmission you can't miss it.

Thats exactly where im against. I also havent fired it up yet but hope the same.

I tried my best to get a piece of rubber hose inbetween it but theres no way.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Boosted Performance single turbo build	Boosted Performance	Forced Induction	1841	09-06-2016 11:17 AM
Boosted Performance single turbo results	Boosted Performance	Forced Induction	136	06-18-2014 05:40 PM
2012 Option List Includes Dealer-Installed Performance	SeattleLion	Nissan 370Z General Discussions	3	10-08-2011 02:21 PM
Come support A.M. Performance at the Laguna Seca Grand Am round next weekend!!!!!!!	Mike@AMPerformance	Nissan 370Z General Discussions	16	07-13-2011 11:47 PM
Come support A.M. Performance at the Laguna Seca Grand Am round next weekend!!!!!!!	Mike@AMPerformance	Northern California Region	0	07-01-2011 07:13 PM

04-13-2014, 10:48 AM	#1 (permalink)
biggestsack Base Member Join Date: Mar 2012 Location: Sacramento Posts: 66 Drives: Rogue Rep Power: 14	Does anyone know if the BP kit will fit around the new Z1 CSC eliminator? I've been looking at both the BP install manual and the Z1 CSC manual and having trouble determining from the provided images.