Boosted Performance round 2 list

Joepro

Most diagrams I see use the turbo as the pressure source, the manifold is acceptable as a source? and why are the watesgates still connected to the intake tube? Sorry of the noob questions.

__________________
Swift|Koni|SPC| FI CBE|Z1|Stillen|Sbend|Zspeed|R/T Tuned|523 whp|458 tq|10.5 psi|SOLD
Joepro's Journal|Joepro's Boosted Performance Build |Pittsburgh-Western-Pa-Ohio-Wv-Group

jwick

You want to use the IM source as it'll tell you the actual pressure at the motor, not what the turbo is seeing. There will be some loses along the way, mostly from FMIC. The WGs lines from the IM have to remain connected because that is what is supplying the pressure to open the WG. The pressure source line from the EBC is going to connect to the top of the WG (the banjo bolts Sasha tells you to leave open to atmosphere in the instructions if you are not running boost control pg 72) adding additional pressure on top of the WG Spring to prevent it from opening until desired boost level.

__________________
'10 G37T 6MT Graphite/Graphite - BP - G37T Build