Boosted Performance round 2 list

jwick · 03-06-2014, 09:33 PM

Quote:

Originally Posted by Joepro

I assume that is the way it should be logically, to trigger the relay to power the pump, but again I like to be sure is all

Snap me a picture once you've got it right

Boosted Performance · 03-07-2014, 11:26 AM

Sorry guys, I just didn't have a car available to make a proper instruction manual for the pump harness.

It is just a matter of cutting the power wire going to the pump. One end (that goes to the harness/engine bay) is used to power/turn on the relay. The other end of the wire (going to the fuel pump)is connected to the output of the relay. Then all you have is power and ground (black/red) to connect to the battery.

JMac88 · 03-07-2014, 11:51 AM

are you guys looking for something like this?

DIY: Build and Install Fuel Pump Relay and Harness

Joepro · 03-07-2014, 05:31 PM

Mother of God.

Boosted Performance · 03-09-2014, 11:01 PM

Ohhh, well..... what do we have here? More kits in the works...???

Something I forgot to share...had a custom Greddy oil filter/thermostat setup for a customer recently, and don't think I posted pics of it:

It goes in the same location as the usual oil filter relocation kit. This one will have to be bolted to the aluminium engine cradle though. It is has to go as far as possible towards the driver side wheel.

Oh, and I finally got around to making an exhaust for my own car

..Magnaflow all around:

jwick · 03-10-2014, 12:26 AM

GReddy thermostat is for my setup. I'll provide good pics of it once installed.

GaleForce · 03-10-2014, 08:42 AM

I can see your diff bracket.

Oh, and I need that lift. Bendpack SP-7X?

Boosted Performance · 03-10-2014, 12:17 PM

Quote:

Originally Posted by GaleForce

I can see your diff bracket.

Oh, and I need that lift. Bendpack SP-7X?

Yup, the diff brace is in there, and it does a great job. Never had a wheel hop issue after it was installed.

The lift part number sounds about right....best thing I ever purchased.

Chuck33079 · 03-10-2014, 12:18 PM

Quote:

Originally Posted by Boosted Performance

Yup, the diff brace is in there, and it does a great job. Never had a wheel hop issue after it was installed.

So what would we have to do to get you to make something like thes for a Z34?

Boosted Performance · 03-10-2014, 12:45 PM

Quote:

Originally Posted by Chuck33079

So what would we have to do to get you to make something like thes for a Z34?

The second local car I installed a twin scroll kit on is coming back in a month or so. I can have a look at the diff brace option at that time.

Chuck33079 · 03-10-2014, 12:46 PM

Quote:

Originally Posted by Boosted Performance

The second local car I installed a twin scroll kit on is coming back in a month or so. I can have a look at the diff brace option at that time.

Fantastic. Anything we can do to make these things hook up would be worth its weight in gold.

wheee! · 03-10-2014, 01:01 PM

Quote:

Originally Posted by Chuck33079

Fantastic. Anything we can do to make these things hook up would be worth its weight in gold.

You heard him Sasha! He's willing to pay it's weight in gold... lol

... but yeah, this would be a nice mod to eliminate hop!

jwick · 03-10-2014, 01:10 PM

I think a bunch of us would be willing to pick one up.

GaleForce · 03-10-2014, 01:13 PM

Quote:

Originally Posted by wheee!

You heard him Sasha! He's willing to pay it's weight in gold... lol

... but yeah, this would be a nice mod to eliminate hop!

And easier to install than solid bushings.

BlkNismo · 03-10-2014, 01:42 PM

Sasha, are those ad07 or ad08. How do they hold grip is 1st n 2nd gear pulls?

03-07-2014, 11:26 AM	#737 (permalink)
Boosted Performance The370Z.com Sponsor Join Date: Feb 2010 Location: Edmonton, AB Posts: 1,629 Drives: Z's Rep Power: 3382	Sorry guys, I just didn't have a car available to make a proper instruction manual for the pump harness. It is just a matter of cutting the power wire going to the pump. One end (that goes to the harness/engine bay) is used to power/turn on the relay. The other end of the wire (going to the fuel pump)is connected to the output of the relay. Then all you have is power and ground (black/red) to connect to the battery. __________________ 750WHP starting @ $7,500 to the door FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html FB: https://www.facebook.com/Boosted-Per...6303179791462/ IG @boostedperformanceyeg

03-07-2014, 11:51 AM	#738 (permalink)
JMac88 Enthusiast Member Join Date: Jun 2010 Location: Edmonton AB Posts: 416 Drives: 2010 PW 370z Rep Power: 15	are you guys looking for something like this? DIY: Build and Install Fuel Pump Relay and Harness wheee!, GaleForce and m3chhawk like this. __________________ Full Mod List

03-07-2014, 05:31 PM	#739 (permalink)
Joepro A True Z Fanatic Join Date: Aug 2012 Location: Athens ohio Posts: 1,213 Drives: Company car Rep Power: 34	Mother of God. Cbtech likes this. __________________ Swift\|Koni\|SPC\| FI CBE\|Z1\|Stillen\|Sbend\|Zspeed\|R/T Tuned\|523 whp\|458 tq\|10.5 psi\|SOLD Joepro's Journal\|Joepro's Boosted Performance Build \|Pittsburgh-Western-Pa-Ohio-Wv-Group

03-09-2014, 11:01 PM	#740 (permalink)
Boosted Performance The370Z.com Sponsor Join Date: Feb 2010 Location: Edmonton, AB Posts: 1,629 Drives: Z's Rep Power: 3382	Ohhh, well..... what do we have here? More kits in the works...??? Something I forgot to share...had a custom Greddy oil filter/thermostat setup for a customer recently, and don't think I posted pics of it: It goes in the same location as the usual oil filter relocation kit. This one will have to be bolted to the aluminium engine cradle though. It is has to go as far as possible towards the driver side wheel. Oh, and I finally got around to making an exhaust for my own car ..Magnaflow all around: XwChriswX, wheee!, Blaizon and 4 others like this. __________________ 750WHP starting @ $7,500 to the door FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html FB: https://www.facebook.com/Boosted-Per...6303179791462/ IG @boostedperformanceyeg Last edited by Boosted Performance; 03-09-2014 at 11:27 PM.

03-10-2014, 12:26 AM	#741 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465056	GReddy thermostat is for my setup. I'll provide good pics of it once installed. wheee! and GaleForce like this. __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

03-10-2014, 08:42 AM	#742 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51865	I can see your diff bracket. Oh, and I need that lift. Bendpack SP-7X? __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

03-10-2014, 01:10 PM	#748 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465056	I think a bunch of us would be willing to pick one up. jlo370z likes this. __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

03-10-2014, 01:42 PM	#750 (permalink)
BlkNismo Track Member Join Date: Sep 2011 Location: USA Posts: 614 Drives: Nismo Rep Power: 15	Sasha, are those ad07 or ad08. How do they hold grip is 1st n 2nd gear pulls?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Boosted Performance single turbo build	Boosted Performance	Forced Induction	1841	09-06-2016 12:17 PM
Boosted Performance single turbo results	Boosted Performance	Forced Induction	136	06-18-2014 06:40 PM
2012 Option List Includes Dealer-Installed Performance	SeattleLion	Nissan 370Z General Discussions	3	10-08-2011 03:21 PM
Come support A.M. Performance at the Laguna Seca Grand Am round next weekend!!!!!!!	Mike@AMPerformance	Nissan 370Z General Discussions	16	07-14-2011 12:47 AM
Come support A.M. Performance at the Laguna Seca Grand Am round next weekend!!!!!!!	Mike@AMPerformance	Northern California Region	0	07-01-2011 08:13 PM