Boosted Performance round 2 list

m3chhawk · 12-17-2013, 09:54 AM

Quote:

Originally Posted by Alstann

God, each day I keep waiting, I look at this thread again and again. My heart is changing its mind all the time.

I know this has been discussed before (I think), but is there a benefit to running aftermarket headers with this setup? (Shorty headers, that is.) I know the factory manifolds are well designed, but for maximum efficiency's sake, there could be a benefit, no?

The kit will push well beyond the limits of the stock block, so unless you are running a built motor and trying to squeeze every ounce out of it, I personally don't see the point...

Did you see Sasha's picture of the 3.5 manifolds vs the 3.7 manifolds?

Boosted Performance · 12-17-2013, 11:03 AM

Quote:

Originally Posted by m3chhawk

The kit will push well beyond the limits of the stock block, so unless you are running a built motor and trying to squeeze every ounce out of it, I personally don't see the point...

Did you see Sasha's picture of the 3.5 manifolds vs the 3.7 manifolds?

^^^This.

Glad I can provide the

I think it’s funny how things backfire sometimes.

Cell · 12-17-2013, 11:15 AM

Quote:

Originally Posted by m3chhawk

Well yeah, but that's because you aren't "a brick and mortar facility with bona fide business hours, phone number, e-mail address and fax number that has been in business for 26 years."

Restocking fee is called a restocking fee for a reason. Same as overhead expenses... When delays and expenses comes up because of third party issues, that should not be held against the customer.

zguynate · 12-17-2013, 11:16 AM

Quote:

Originally Posted by Boosted Performance

^^^This.

Glad I can provide the

I think it’s funny how things backfire sometimes.

Yeah me too. It just sucks it was at my expense

Needless to say, im certain I have made the right choice

Chuck33079 · 12-17-2013, 11:19 AM

Quote:

Originally Posted by Boosted Performance

I think it’s funny how things backfire sometimes.

Yeah, but I'm starting to feel pretty bad for the guys. If you're a business owner, to see a project like that go from so successful to complete disaster has got to be brutal.

m3chhawk · 12-17-2013, 11:26 AM

Quote:

Originally Posted by Cell

Restocking fee is called a restocking fee for a reason. Same as overhead expenses... When delays and expenses comes up because of third party issues, that should not be held against the customer.

I agree completely.

The quoted part was GTM's post where they "indirectly" called out FI and BP while touting the MHI kit as the best thing since sliced bread.

Boosted Performance · 12-17-2013, 12:44 PM

Unfortunately, it is not a good situation for the customers/community. That is the bad part. We all share the same passion for this hobby, and most feel the pain of others when something doesn’t go according to plan. It is a lot like a family.

At the same time, a bit of research on a company and their reputation will go a long way when it comes to making a decision like this, and handing over a large amount of money. I started with this turbo stuff 4 years ago on the 350z forums, and can always tell (potential/new) customers to research what my customers have said in the past, and how I go about things. There is something to be said about history…it will almost always repeat itself.

Alstann · 12-17-2013, 05:18 PM

Quote:

Originally Posted by Boosted Performance

^^^This.

Glad I can provide the

I think it’s funny how things backfire sometimes.

Mmhmm - that was the first picture I saw when looking into it.

Either way - my thought process behind aftermarket headers is that, I am in search of the MOST efficient way to make power. I've been doing my research and looking around, and I feel like if there is room to be had with the stock manifolds, I would definitely go that route, provided I do end up going BP or something.

Cost and time of doing aftermarket manifolds is not an objection to me. In the long run, I'll get there.

XwChriswX · 12-17-2013, 05:20 PM

Boosted Performance · 12-17-2013, 05:37 PM

Quote:

Originally Posted by Alstann

Mmhmm - that was the first picture I saw when looking into it.

Either way - my thought process behind aftermarket headers is that, I am in search of the MOST efficient way to make power. I've been doing my research and looking around, and I feel like if there is room to be had with the stock manifolds, I would definitely go that route, provided I do end up going BP or something.

Cost and time of doing aftermarket manifolds is not an objection to me. In the long run, I'll get there.

The way I look at it is that there is no point of doing headers on a stock block, unless you are really looking at squeezing every possible HP out of the kit. Since the kit with OEM headers will make power effortlessly, and a lot more than the stock block can handle, there is no reason to go aftermarket. If you are building the block after all, then it is easier to install the headers with the engine out, since you have to pull it for the build anyway.
That is my though process on this.

jlo370z · 12-17-2013, 09:13 PM

uuggg, had to be holiday season, Ill be ordering one of these kits some day soon.

I have more questions LOL after reading puck's build thread.

Boosted Performance · 12-17-2013, 09:22 PM

Quote:

Originally Posted by jlo370z

uuggg, had to be holiday season, Ill be ordering one of these kits some day soon.

I have more questions LOL after reading puck's build thread.

Just shoot me a pm...I get to answer a lot of questions through PM's..

jlo370z · 12-17-2013, 09:25 PM

Quote:

Originally Posted by Boosted Performance

Just shoot me a pm...I get to answer a lot of questions through PM's..

will do, you should probably have a spot on the first page for all these questions im sure they get asked all the time. You have already answered most of my questions. im going to go back and read the first part to make sure you havent already answered my nOoB question to boost and boost control

Boosted Performance · 12-17-2013, 09:28 PM

No worries, if you can't esily find the answer, just send a pm.

gbrettin · 12-19-2013, 12:36 AM

Sasha, Did you make any attempts on a 7AT kit?

12-17-2013, 12:44 PM	#247 (permalink)
Boosted Performance The370Z.com Sponsor Join Date: Feb 2010 Location: Edmonton, AB Posts: 1,629 Drives: Z's Rep Power: 3382	Unfortunately, it is not a good situation for the customers/community. That is the bad part. We all share the same passion for this hobby, and most feel the pain of others when something doesn’t go according to plan. It is a lot like a family. At the same time, a bit of research on a company and their reputation will go a long way when it comes to making a decision like this, and handing over a large amount of money. I started with this turbo stuff 4 years ago on the 350z forums, and can always tell (potential/new) customers to research what my customers have said in the past, and how I go about things. There is something to be said about history…it will almost always repeat itself. XwChriswX, scionide, elperuano and 5 others like this. __________________ 750WHP starting @ $7,500 to the door FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html FB: https://www.facebook.com/Boosted-Per...6303179791462/ IG @boostedperformanceyeg

12-17-2013, 05:20 PM	#249 (permalink)
XwChriswX WFLYIDNNE Join Date: Jul 2009 Location: In The Fastlane Posts: 50,648 Drives: 02 GDB WRX Rep Power: 452	__________________ Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14

12-17-2013, 09:13 PM	#251 (permalink)
jlo370z Im a Fireball Join Date: Apr 2012 Location: Ill in noise Posts: 3,370 Drives: 11 370z Red 6spd Rep Power: 43426	uuggg, had to be holiday season, Ill be ordering one of these kits some day soon. I have more questions LOL after reading puck's build thread. __________________ ❝The Jlo370Z Build❞ 523HP \| 455 ftb tq \| 11.5 PSI \| 93 Octane *2017 Porsche 991.2 C4!l*

12-17-2013, 09:28 PM	#254 (permalink)
Boosted Performance The370Z.com Sponsor Join Date: Feb 2010 Location: Edmonton, AB Posts: 1,629 Drives: Z's Rep Power: 3382	No worries, if you can't esily find the answer, just send a pm. fuct, DEpointfive0 and jlo370z like this. __________________ 750WHP starting @ $7,500 to the door FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html FB: https://www.facebook.com/Boosted-Per...6303179791462/ IG @boostedperformanceyeg

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Boosted Performance single turbo build	Boosted Performance	Forced Induction	1841	09-06-2016 12:17 PM
Boosted Performance single turbo results	Boosted Performance	Forced Induction	136	06-18-2014 06:40 PM
2012 Option List Includes Dealer-Installed Performance	SeattleLion	Nissan 370Z General Discussions	3	10-08-2011 03:21 PM
Come support A.M. Performance at the Laguna Seca Grand Am round next weekend!!!!!!!	Mike@AMPerformance	Nissan 370Z General Discussions	16	07-14-2011 12:47 AM
Come support A.M. Performance at the Laguna Seca Grand Am round next weekend!!!!!!!	Mike@AMPerformance	Northern California Region	0	07-01-2011 08:13 PM

12-19-2013, 12:36 AM	#255 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,282 Drives: Tricycle Rep Power: 589151	Sasha, Did you make any attempts on a 7AT kit?