Nissan 370Z Forum  

Boosted Performance round 2 list

Originally Posted by dragonbreath I started surgery today. I got everything off that needs to be off. My exhaust was a whore. I had to sawzaw the y-pipe off of

Go Back   Nissan 370Z Forum > Nissan 370Z Tech Area > Engine & Drivetrain > Forced Induction


Like Tree1430Likes

Reply
 
LinkBack Thread Tools Display Modes
Old 03-27-2014, 03:33 PM   #961 (permalink)
Track Member
 
AlexRaymond19's Avatar
 
Join Date: Jun 2011
Location: Maine
Posts: 771
Drives: 2010 Nissan 370z
Rep Power: 15
AlexRaymond19 is on a distinguished road
Default

Quote:
Originally Posted by dragonbreath View Post
I started surgery today. I got everything off that needs to be off. My exhaust was a whore. I had to sawzaw the y-pipe off of the rear portion because of all the rust on the nuts lol. A 14 was too big and a 13 was too small. The demon bolt was surprisingly easy. Slowly but surely...
I had the same issue when I did my exhaust. I hammered the too small one on, and that was good for a few turns before it stripped out. Luckly it was loose enough to fit a saw between the flanges and cut the bolt.


Congrats man, so jealous...
__________________
2010 370Z Touring MT | Stillen | Motordyne | Momentum| Z1 | Fast Intentions | Advant Garde | RE11 | Swift | SPC | Quaife | Whiteline | Evo R | 322RWHP 259ft-lb Mustang
AlexRaymond19 is offline   Reply With Quote
Old 03-27-2014, 04:03 PM   #962 (permalink)
Im a Fireball
 
jlo370z's Avatar
 
Join Date: Apr 2012
Location: Ill in noise
Posts: 3,370
Drives: 11 370z Red 6spd
Rep Power: 43426
jlo370z has a reputation beyond reputejlo370z has a reputation beyond reputejlo370z has a reputation beyond reputejlo370z has a reputation beyond reputejlo370z has a reputation beyond reputejlo370z has a reputation beyond reputejlo370z has a reputation beyond reputejlo370z has a reputation beyond reputejlo370z has a reputation beyond reputejlo370z has a reputation beyond reputejlo370z has a reputation beyond repute
Default

Quote:
Originally Posted by dragonbreath View Post
I started surgery today. I got everything off that needs to be off. My exhaust was a whore. I had to sawzaw the y-pipe off of the rear portion because of all the rust on the nuts lol. A 14 was too big and a 13 was too small. The demon bolt was surprisingly easy. Slowly but surely...
Nice mine started yesterday too. I got everything off, plus pulled the tranny. today the trans will go back in then kit install begins. my exhaust came off easy because it was only on for 2000 miles
__________________
❝The Jlo370Z Build❞
523HP | 455 ftb tq | 11.5 PSI | 93 Octane
2017 Porsche 991.2 C4!l
jlo370z is offline   Reply With Quote
Old 03-27-2014, 04:10 PM   #963 (permalink)
A True Z Fanatic
 
COSMO's Avatar
 
Join Date: Dec 2012
Location: FL
Posts: 1,816
Drives: 2012 Touring GTM TT
Rep Power: 19
COSMO has a reputation beyond reputeCOSMO has a reputation beyond reputeCOSMO has a reputation beyond reputeCOSMO has a reputation beyond reputeCOSMO has a reputation beyond reputeCOSMO has a reputation beyond reputeCOSMO has a reputation beyond reputeCOSMO has a reputation beyond reputeCOSMO has a reputation beyond reputeCOSMO has a reputation beyond reputeCOSMO has a reputation beyond repute
Default

Why did you have to pull the tranny?
COSMO is offline   Reply With Quote
Old 03-27-2014, 04:16 PM   #964 (permalink)
Im a Fireball
 
jlo370z's Avatar
 
Join Date: Apr 2012
Location: Ill in noise
Posts: 3,370
Drives: 11 370z Red 6spd
Rep Power: 43426
jlo370z has a reputation beyond reputejlo370z has a reputation beyond reputejlo370z has a reputation beyond reputejlo370z has a reputation beyond reputejlo370z has a reputation beyond reputejlo370z has a reputation beyond reputejlo370z has a reputation beyond reputejlo370z has a reputation beyond reputejlo370z has a reputation beyond reputejlo370z has a reputation beyond reputejlo370z has a reputation beyond repute
Default

Quote:
Originally Posted by cosmogirl View Post
Why did you have to pull the tranny?

South bend clutch /flywheel , new csc all being installed today


Sent from my iPhone using Tapatalk
COSMO likes this.
__________________
❝The Jlo370Z Build❞
523HP | 455 ftb tq | 11.5 PSI | 93 Octane
2017 Porsche 991.2 C4!l
jlo370z is offline   Reply With Quote
Old 03-27-2014, 07:00 PM   #965 (permalink)
A True Z Fanatic
 
zguynate's Avatar
 
Join Date: Jan 2012
Location: Strangeland
Posts: 1,054
Drives: 09 370z
Rep Power: 73
zguynate has a reputation beyond reputezguynate has a reputation beyond reputezguynate has a reputation beyond reputezguynate has a reputation beyond reputezguynate has a reputation beyond reputezguynate has a reputation beyond reputezguynate has a reputation beyond reputezguynate has a reputation beyond reputezguynate has a reputation beyond reputezguynate has a reputation beyond reputezguynate has a reputation beyond repute
Default

It's going to be a bit before I finish. I'm workin 2 jobs at about 70 hours a week. Needless to say I don't have much free time. And most of that free time is spent with the wife. Happy wife happy life lol. I'm really in no rush though. As long as its done by ZdayZ!
jlo370z likes this.
__________________
2009 370z touring w/sports package
zguynate is offline   Reply With Quote
Old 03-27-2014, 07:40 PM   #966 (permalink)
A True Z Fanatic
 
axmea?'s Avatar
 
Join Date: Apr 2012
Location: SoCal
Posts: 6,235
Drives: WELL ZED PW 6MT
Rep Power: 53241
axmea? has a reputation beyond reputeaxmea? has a reputation beyond reputeaxmea? has a reputation beyond reputeaxmea? has a reputation beyond reputeaxmea? has a reputation beyond reputeaxmea? has a reputation beyond reputeaxmea? has a reputation beyond reputeaxmea? has a reputation beyond reputeaxmea? has a reputation beyond reputeaxmea? has a reputation beyond reputeaxmea? has a reputation beyond repute
Default

Boosted P. Can you PM me a price shipped to 91381 please. Also, it is a daily driver on L.A. freeways. There will be the occasional 5 - 15 mile drive on 1st gear traffic. What else should I consider?
jlo370z likes this.
__________________

>MyZ's Album< NISMO Convert/ECUTEK/Takeda CAI/F.I. HFC NR CB Carbon/F.I. 34 Row Oil Cooler/4.08 Final Drive /Powertrix+Swifts/Hotchkis/SPL/Whiteline/TWM/Zoom Engineering/EVO-R/AeroJacket Vented CF Fenders + CF Spoiler/Avant Garde-WORK/NST/Morimoto Halo/STi Clear Lenses/Carbon Signal Automotive/RJM Performance/ZSpeed Clutch Flywheel CSC delete
axmea? is offline   Reply With Quote
Old 03-27-2014, 08:00 PM   #967 (permalink)
A True Z Fanatic
 
GaleForce's Avatar
 
Join Date: Aug 2011
Location: Ontario, Canada
Posts: 21,749
Drives: Varis Arising II
Rep Power: 51865
GaleForce has a reputation beyond reputeGaleForce has a reputation beyond reputeGaleForce has a reputation beyond reputeGaleForce has a reputation beyond reputeGaleForce has a reputation beyond reputeGaleForce has a reputation beyond reputeGaleForce has a reputation beyond reputeGaleForce has a reputation beyond reputeGaleForce has a reputation beyond reputeGaleForce has a reputation beyond reputeGaleForce has a reputation beyond repute
Default

Quote:
Originally Posted by axmea? View Post
Boosted P. Can you PM me a price shipped to 91381 please. Also, it is a daily driver on L.A. freeways. There will be the occasional 5 - 15 mile drive on 1st gear traffic. What else should I consider?
The kit is complete other than a clutch, and any gauges that you want to use.
jlo370z and axmea? like this.
__________________
GaleForce is offline   Reply With Quote
Old 03-27-2014, 09:01 PM   #968 (permalink)
A True Z Fanatic
 
jwick's Avatar
 
Join Date: Dec 2010
Location: Houston
Posts: 14,532
Drives: '10 G37 6MT
Rep Power: 2465056
jwick has a reputation beyond reputejwick has a reputation beyond reputejwick has a reputation beyond reputejwick has a reputation beyond reputejwick has a reputation beyond reputejwick has a reputation beyond reputejwick has a reputation beyond reputejwick has a reputation beyond reputejwick has a reputation beyond reputejwick has a reputation beyond reputejwick has a reputation beyond repute
Default

Quote:
Originally Posted by GaleForce View Post
The kit is complete other than a clutch, and any gauges that you want to use.
And shipping and import duty is $350-400
__________________
'10 G37T 6MT Graphite/Graphite - BP - G37T Build

jwick is offline   Reply With Quote
Old 03-27-2014, 11:48 PM   #969 (permalink)
A True Z Fanatic
 
jwick's Avatar
 
Join Date: Dec 2010
Location: Houston
Posts: 14,532
Drives: '10 G37 6MT
Rep Power: 2465056
jwick has a reputation beyond reputejwick has a reputation beyond reputejwick has a reputation beyond reputejwick has a reputation beyond reputejwick has a reputation beyond reputejwick has a reputation beyond reputejwick has a reputation beyond reputejwick has a reputation beyond reputejwick has a reputation beyond reputejwick has a reputation beyond reputejwick has a reputation beyond repute
Default

So I went through everything in the box this evening in preparation for tear down. I do have a few questions for those that have tackled this already:

1. How much of the vacuum hose is left over after you have plumbed the WGs/BOV? I need to run an equal amount from the charge pipe to the WG for my EBC and just wondering if I should plan to buy all the additional or if there will be some left over. Any place to order it from specifically or just pick up vacuum hose from AutoZOne?
2. Are these (picture below) intended for something specific or just thrown in in case you need them. I did not see them in the manual but I could have missed them.

__________________
'10 G37T 6MT Graphite/Graphite - BP - G37T Build

jwick is offline   Reply With Quote
Old 03-28-2014, 12:07 AM   #970 (permalink)
A True Z Fanatic
 
Cell's Avatar
 
Join Date: Jan 2010
Location: Chicago
Posts: 1,449
Drives: A Garbage Truck
Rep Power: 21
Cell has a reputation beyond reputeCell has a reputation beyond reputeCell has a reputation beyond reputeCell has a reputation beyond reputeCell has a reputation beyond reputeCell has a reputation beyond reputeCell has a reputation beyond reputeCell has a reputation beyond reputeCell has a reputation beyond reputeCell has a reputation beyond reputeCell has a reputation beyond repute
Default

Quote:
Originally Posted by jwick View Post
So I went through everything in the box this evening in preparation for tear down. I do have a few questions for those that have tackled this already:

1. How much of the vacuum hose is left over after you have plumbed the WGs/BOV? I need to run an equal amount from the charge pipe to the WG for my EBC and just wondering if I should plan to buy all the additional or if there will be some left over. Any place to order it from specifically or just pick up vacuum hose from AutoZOne?
2. Are these (picture below) intended for something specific or just thrown in in case you need them. I did not see them in the manual but I could have missed them.

I had those too but forgot what I used them on.
Cell is offline   Reply With Quote
Old 03-28-2014, 12:08 AM   #971 (permalink)
The370Z.com Sponsor
 
Boosted Performance's Avatar
 
Join Date: Feb 2010
Location: Edmonton, AB
Posts: 1,629
Drives: Z's
Rep Power: 3382
Boosted Performance has a reputation beyond reputeBoosted Performance has a reputation beyond reputeBoosted Performance has a reputation beyond reputeBoosted Performance has a reputation beyond reputeBoosted Performance has a reputation beyond reputeBoosted Performance has a reputation beyond reputeBoosted Performance has a reputation beyond reputeBoosted Performance has a reputation beyond reputeBoosted Performance has a reputation beyond reputeBoosted Performance has a reputation beyond reputeBoosted Performance has a reputation beyond repute
Default

Quote:
Originally Posted by jwick View Post
So I went through everything in the box this evening in preparation for tear down. I do have a few questions for those that have tackled this already:

1. How much of the vacuum hose is left over after you have plumbed the WGs/BOV? I need to run an equal amount from the charge pipe to the WG for my EBC and just wondering if I should plan to buy all the additional or if there will be some left over. Any place to order it from specifically or just pick up vacuum hose from AutoZOne?
2. Are these (picture below) intended for something specific or just thrown in in case you need them. I did not see them in the manual but I could have missed them.

I usually put plenty of hose to cover the wastegates and BOV. I don't know if there is enough left over to rune the EBC.

Those pieces in the picture are for the transmission harness slight relocation on the bell housing, passenger side. The harness needs to be secured a bit higher than OEM location due to the exhaust pipes.

Two are needed, one is extra.
wheee! likes this.
__________________
750WHP starting @ $7,500 to the door
FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html
FB: https://www.facebook.com/Boosted-Per...6303179791462/
IG @boostedperformanceyeg
Boosted Performance is offline   Reply With Quote
Old 03-28-2014, 12:12 AM   #972 (permalink)
A True Z Fanatic
 
jwick's Avatar
 
Join Date: Dec 2010
Location: Houston
Posts: 14,532
Drives: '10 G37 6MT
Rep Power: 2465056
jwick has a reputation beyond reputejwick has a reputation beyond reputejwick has a reputation beyond reputejwick has a reputation beyond reputejwick has a reputation beyond reputejwick has a reputation beyond reputejwick has a reputation beyond reputejwick has a reputation beyond reputejwick has a reputation beyond reputejwick has a reputation beyond reputejwick has a reputation beyond repute
Default

Sasha you're the man! And seem to never sleep.
jlo370z likes this.
__________________
'10 G37T 6MT Graphite/Graphite - BP - G37T Build

jwick is offline   Reply With Quote
Old 03-28-2014, 12:13 AM   #973 (permalink)
A True Z Fanatic
 
Cell's Avatar
 
Join Date: Jan 2010
Location: Chicago
Posts: 1,449
Drives: A Garbage Truck
Rep Power: 21
Cell has a reputation beyond reputeCell has a reputation beyond reputeCell has a reputation beyond reputeCell has a reputation beyond reputeCell has a reputation beyond reputeCell has a reputation beyond reputeCell has a reputation beyond reputeCell has a reputation beyond reputeCell has a reputation beyond reputeCell has a reputation beyond reputeCell has a reputation beyond repute
Default

Quote:
Originally Posted by Boosted Performance View Post
I usually put plenty of hose to cover the wastegates and BOV. I don't know if there is enough left over to rune the EBC.

Those pieces in the picture are for the transmission harness slight relocation on the bell housing, passenger side. The harness needs to be secured a bit higher than OEM location due to the exhaust pipes.

Two are needed, one is extra.
There is not enough hoses for the EBC as far as I remember. I had to buy more.
Cell is offline   Reply With Quote
Old 03-28-2014, 12:17 AM   #974 (permalink)
The370Z.com Sponsor
 
Boosted Performance's Avatar
 
Join Date: Feb 2010
Location: Edmonton, AB
Posts: 1,629
Drives: Z's
Rep Power: 3382
Boosted Performance has a reputation beyond reputeBoosted Performance has a reputation beyond reputeBoosted Performance has a reputation beyond reputeBoosted Performance has a reputation beyond reputeBoosted Performance has a reputation beyond reputeBoosted Performance has a reputation beyond reputeBoosted Performance has a reputation beyond reputeBoosted Performance has a reputation beyond reputeBoosted Performance has a reputation beyond reputeBoosted Performance has a reputation beyond reputeBoosted Performance has a reputation beyond repute
Default

Found the picture and uploaded:





Quote:
Originally Posted by Cell View Post
There is not enough hoses for the EBC as far as I remember. I had to buy more.
I have been adding more hose with the kit, so it may just be enough...depending on the EBC selonoid location.
jlo370z likes this.
__________________
750WHP starting @ $7,500 to the door
FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html
FB: https://www.facebook.com/Boosted-Per...6303179791462/
IG @boostedperformanceyeg
Boosted Performance is offline   Reply With Quote
Old 03-28-2014, 12:21 AM   #975 (permalink)
A True Z Fanatic
 
jwick's Avatar
 
Join Date: Dec 2010
Location: Houston
Posts: 14,532
Drives: '10 G37 6MT
Rep Power: 2465056
jwick has a reputation beyond reputejwick has a reputation beyond reputejwick has a reputation beyond reputejwick has a reputation beyond reputejwick has a reputation beyond reputejwick has a reputation beyond reputejwick has a reputation beyond reputejwick has a reputation beyond reputejwick has a reputation beyond reputejwick has a reputation beyond reputejwick has a reputation beyond repute
Default

Quote:
Originally Posted by Boosted Performance View Post
Found the picture and uploaded:







I have been adding more hose with the kit, so it may just be enough...depending on the EBC selonoid location.
I'm going to run the charge pipe fitting hose straight to the compartment with the Brake/Clutch Master Cylinder. Tee it, one running to WGs lower, the other to EBC and then to WGs upper.

If I need more hose should I just buy the silicone hose Treadstone has on their website? I want 6.3mm, right?
__________________
'10 G37T 6MT Graphite/Graphite - BP - G37T Build

jwick is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Boosted Performance single turbo build Boosted Performance Forced Induction 1841 09-06-2016 12:17 PM
Boosted Performance single turbo results Boosted Performance Forced Induction 136 06-18-2014 06:40 PM
2012 Option List Includes Dealer-Installed Performance SeattleLion Nissan 370Z General Discussions 3 10-08-2011 03:21 PM
Come support A.M. Performance at the Laguna Seca Grand Am round next weekend!!!!!!! Mike@AMPerformance Nissan 370Z General Discussions 16 07-14-2011 12:47 AM
Come support A.M. Performance at the Laguna Seca Grand Am round next weekend!!!!!!! Mike@AMPerformance Northern California Region 0 07-01-2011 08:13 PM


All times are GMT -5. The time now is 01:51 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2