Boosted Performance round 2 list

equalme · 02-17-2014, 07:32 PM

Anybody running a HFC with this? Or is it not recommended due to heat?

jlo370z · 02-17-2014, 07:34 PM

Quote:

Originally Posted by equalme

Anybody running a HFC with this? Or is it not recommended due to heat?

where would you put it?

LMBmikeZ · 02-17-2014, 07:36 PM

Quote:

Originally Posted by jlo370z

where would you put it?

thinking the same thing

Boosted Performance · 02-17-2014, 07:48 PM

With an OEM like exhaust it is possible. I am doing this on a 350Z twin scroll kit for a customer that requested it.

These are $500ea, just for the converters (3"inlet 3" outlet):

KaienZ34 · 02-17-2014, 08:16 PM

Looks so pretty.

cdoxp800 · 02-17-2014, 08:34 PM

Boosted Performance

Check out the MillSpec Cats. Way cheaper and are 304 SS and you can get them in 100 Cell or 200 Cell.

These are what we use at the races for GTA Event.

Mil.Spec :: Universal :: 100 cell cats

OldBoy · 02-17-2014, 09:53 PM

Quote:

Originally Posted by Boosted Performance

With an OEM like exhaust it is possible. I am doing this on a 350Z twin scroll kit for a customer that requested it.

These are $500ea, just for the converters (3"inlet 3" outlet):

Would you be able to make one like that with an O2 bung on each side for our 370's? I live in a magnificent province of tree huggers who enjoy fu#@!^g us over with useless emissions test every 2 years. I was planing on getting an O2 simulator just so I can turn on my secondary O2 monitor back on for the test but if I can get functioning cats on the car, that'd be much better. Something easily removable would be awesome.

jlo370z · 02-17-2014, 09:57 PM

Quote:

Originally Posted by OldBoy

Would you be able to make one like that with an O2 bung on each side for our 370's? I live in a magnificent province of tree huggers who enjoy fu#@!^g us over with useless emissions test every 2 years. I was planing on getting an O2 simulator just so I can turn on my secondary O2 monitor back on for the test but if I can get functioning cats on the car, that'd be much better. Something easily removable would be awesome.

thats what i was thinking too.

equalme · 02-17-2014, 10:29 PM

BP gets better and better!

Reason I asked was because I was thinking about picking up berk hfc...but hopefully planning on getting a BP kit either at the end of the year or early next year.

I love to roll my windows down when weather permits, but didn't want to deal with fumes.

jlo370z · 02-17-2014, 10:32 PM

Quote:

Originally Posted by equalme

BP gets better and better!

Reason I asked was because I was thinking about picking up berk hfc...but hopefully planning on getting a BP kit either at the end of the year or early next year.

I love to roll my windows down when weather permits, but didn't want to deal with fumes.

you will be going so fast the fumes wont catch up

equalme · 02-17-2014, 11:00 PM

Quote:

Originally Posted by jlo370z

you will be going so fast the fumes wont catch up

Houston...we have some bad traffic at times.

Joe@ZSpeed · 02-18-2014, 02:15 PM

Quote:

Originally Posted by Cell

I would recommend dynoing with the new clutch with it broken in. Should call up project X to see what they recommend for a clutch. If I had to do it again, I would not go with southbend because of the break in period. 1000 miles to break in...

I did the BP kit install myself then brought it to project X to let them look it over. Then had them put in the new clutch and flywheel.

You probably will experience slipping with the stock clutch at 500whp.

Not all clutches require a 1,000 mile break in, "ANY" full face clutch should be broke in a minimum of 500 miles, This allows the clutch material to flatten out so it will hold all of the TQ it is made to hold.

Puck style clutches can be broke in in as little as 300 miles as they are more abrasive and will seat/flatten out faster.

Kevlar clutches require a 1,000 mile break in because of the material, It is non-abrasive which will take longer to settle in, but on the up side, it doesn't wear the opposing surfaces (flywheel and pressure plate)

jwick · 02-18-2014, 02:44 PM

Quote:

Originally Posted by Boosted Performance

With an OEM like exhaust it is possible. I am doing this on a 350Z twin scroll kit for a customer that requested it.

Sasha, where would you recommend putting the cat if you have the OEM like exhaust? Would you just put a single in the downpipe after bend prior to OEM-like mid-pipe flange? What about inserting two, one in each branch, in the mid-pipe?

TopgunZ · 02-18-2014, 02:52 PM

Quote:

Originally Posted by equalme

BP gets better and better!

Reason I asked was because I was thinking about picking up berk hfc...but hopefully planning on getting a BP kit either at the end of the year or early next year.

I love to roll my windows down when weather permits, but didn't want to deal with fumes.

Going E85 is another option. That was one of the reasons I went with it. The fumes are barely detectable without cats. When I was on 91 it was giving me a headache.

Plus its a whole lot easier to pass strict emissions regulations when running E. You only have 15% petrol to deal with and any HFC will get you by.

Sasha, This would be awesome to see so people could swap a cat in place for testing and swap it out when done. So much easier than taking the turbo itself off and all piping.

Boosted Performance · 02-18-2014, 03:24 PM

Quote:

Originally Posted by cdoxp800

Boosted Performance

Check out the MillSpec Cats. Way cheaper and are 304 SS and you can get them in 100 Cell or 200 Cell.

These are what we use at the races for GTA Event.

Mil.Spec :: Universal :: 100 cell cats

Thanks, will keep these in mind for future.

Quote:

Originally Posted by jwick

Sasha, where would you recommend putting the cat if you have the OEM like exhaust? Would you just put a single in the downpipe after bend prior to OEM-like mid-pipe flange? What about inserting two, one in each branch, in the mid-pipe?

It would go in the circle:

The second part of the down pipe would be replaced by a high flow converter. The recirc would probably have to be moved a bit further towards the back, but that is not a big deal. The recirc would also be after the cat, so only the exhaust gases that go through the turbo would go through the converter while in boost.

02-17-2014, 07:32 PM	#541 (permalink)
equalme Track Member Join Date: Feb 2013 Location: Kansas City Posts: 656 Drives: RCF Rep Power: 13	Anybody running a HFC with this? Or is it not recommended due to heat? __________________ ---Get your door handles painted---

02-17-2014, 07:48 PM	#544 (permalink)
Boosted Performance The370Z.com Sponsor Join Date: Feb 2010 Location: Edmonton, AB Posts: 1,629 Drives: Z's Rep Power: 3382	With an OEM like exhaust it is possible. I am doing this on a 350Z twin scroll kit for a customer that requested it. These are $500ea, just for the converters (3"inlet 3" outlet): fuct, G37sHKS, 09nismo498 and 7 others like this. __________________ 750WHP starting @ $7,500 to the door FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html FB: https://www.facebook.com/Boosted-Per...6303179791462/ IG @boostedperformanceyeg

02-17-2014, 08:16 PM	#545 (permalink)
KaienZ34 A True Z Fanatic Join Date: Oct 2009 Location: LA. not L.a. Posts: 21,652 Drives: Z34 Tour/Sport Rep Power: 178	Looks so pretty. __________________ *"These Violent Delights Have Violent Ends"* http://www.the370z.com/members/kaienz34-albums-z34.html

02-17-2014, 08:34 PM	#546 (permalink)
cdoxp800 A True Z Fanatic Join Date: May 2009 Location: FL Posts: 1,337 Drives: 2011 Nismo Rep Power: 19	Boosted Performance Check out the MillSpec Cats. Way cheaper and are 304 SS and you can get them in 100 Cell or 200 Cell. These are what we use at the races for GTA Event. Mil.Spec :: Universal :: 100 cell cats fuct likes this. __________________ 2011 Brilliant Silver NISMO 370z. #: 0046. PPE LTH \| MillSpec Cats \| F.I Exhaust \| Akuma Intakes \| Rotora 6/4 Brakes

02-17-2014, 10:29 PM	#549 (permalink)
equalme Track Member Join Date: Feb 2013 Location: Kansas City Posts: 656 Drives: RCF Rep Power: 13	BP gets better and better! Reason I asked was because I was thinking about picking up berk hfc...but hopefully planning on getting a BP kit either at the end of the year or early next year. I love to roll my windows down when weather permits, but didn't want to deal with fumes. __________________ ---Get your door handles painted--- Last edited by equalme; 02-17-2014 at 10:31 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Boosted Performance single turbo build	Boosted Performance	Forced Induction	1841	09-06-2016 12:17 PM
Boosted Performance single turbo results	Boosted Performance	Forced Induction	136	06-18-2014 06:40 PM
2012 Option List Includes Dealer-Installed Performance	SeattleLion	Nissan 370Z General Discussions	3	10-08-2011 03:21 PM
Come support A.M. Performance at the Laguna Seca Grand Am round next weekend!!!!!!!	Mike@AMPerformance	Nissan 370Z General Discussions	16	07-14-2011 12:47 AM
Come support A.M. Performance at the Laguna Seca Grand Am round next weekend!!!!!!!	Mike@AMPerformance	Northern California Region	0	07-01-2011 08:13 PM