GTM Performance Engineering: MHI Twin Turbo Official Release

Chuck33079 · 10-30-2013, 05:04 PM

Quote:

Originally Posted by elperuano

Ahh ok. My mistake.

It might be more likely that a member gets 10k miles on their kit before we see the official results though

BlkNismo · 10-30-2013, 05:33 PM

Quote:

Originally Posted by Chuck33079

No, Mike mentioned a tear down and inspection of their test vehicle at some point. It would be interesting to see whenever it happens.

yes this is what referring to.

SPOHN · 10-30-2013, 06:06 PM

It should be posted this week

Mike@GTM · 10-30-2013, 07:04 PM

Update: Things are moving along. Some of our guys are in Detroit for training on the mandrel bending machine this week. We anticipate the dies being shipped sometime early next week so we'll have them in hand within a week and a half or so. Once we have the dies, then BLM will be sending a tech out to get our bender up and running so we can start bending some pipes.

Also, our casting company assures us that they are on schedule.

As for the other thread on the initial test car, we have that on our "to do" list and will be releasing that as soon as Sam and I have some time to focus on it.

BlkNismo · 11-05-2013, 03:09 AM

question regarding the tuning aspect.....the base tune that comes with the turn key kit, is this only set for default wastegate pressure, assuming aprox 6psi?

i plan on running a ebc around 7 or 8psi. does this require the tune to be refined?

esfourteen · 11-05-2013, 09:34 AM

Quote:

Originally Posted by BlkNismo

question regarding the tuning aspect.....the base tune that comes with the turn key kit, is this only set for default wastegate pressure, assuming aprox 6psi?

i plan on running a ebc around 7 or 8psi. does this require the tune to be refined?

GTM tunes the way most do for these cars using the MAF, so turning up the boost a few psi will not require a retune. fuel will adjust based on maf flow and timing shouldn't need to be retarded until you're running much higher boost levels

Dzel · 11-05-2013, 09:54 AM

You said retarted! Lol

Sent with TapAhoe

m3chhawk · 11-05-2013, 09:57 AM

Quote:

Originally Posted by Dzel

You said retarted! Lol

Sent with TapAhoe

Actually he said retarded....

Dzel · 11-05-2013, 11:48 AM

Lmao I love this forum sometimes

Sent with TapAhoe

Tb09z · 11-05-2013, 12:02 PM

Good stuff lol

BlkNismo · 11-05-2013, 04:58 PM

Quote:

Originally Posted by esfourteen

GTM tunes the way most do for these cars using the MAF, so turning up the boost a few psi will not require a retune. fuel will adjust based on maf flow and timing shouldn't need to be retarded until you're running much higher boost levels

Thanks buddy.

Dzel · 11-07-2013, 10:34 PM

Soooooo.... yup.

Sent with TapAhoe

Alkatraz · 11-07-2013, 10:48 PM

Pre TT Kit Dyno Day tomorrow......

3 power runs for $30

It's going to be a long gap between these dyno runs and the post TT install runs but it will at least give me some ballpark idea of the gains.

Dzel · 11-08-2013, 08:13 AM

Sweet finally some action

Sent with TapAhoe

Alkatraz · 11-09-2013, 01:43 AM

R2C Intakes, FI HFC and Catback exhaust, untuned....

10-30-2013, 06:06 PM	#1878 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	It should be posted this week Dzel likes this. __________________

10-30-2013, 07:04 PM	#1879 (permalink)
Mike@GTM Not an active Vendor. DO NOT BUY Join Date: Sep 2009 Location: California Posts: 391 Drives: '13 Hot Lava FR-S Rep Power: 17	Update: Things are moving along. Some of our guys are in Detroit for training on the mandrel bending machine this week. We anticipate the dies being shipped sometime early next week so we'll have them in hand within a week and a half or so. Once we have the dies, then BLM will be sending a tech out to get our bender up and running so we can start bending some pipes. Also, our casting company assures us that they are on schedule. As for the other thread on the initial test car, we have that on our "to do" list and will be releasing that as soon as Sam and I have some time to focus on it. puckshaw, SPOHN, Dzel and 3 others like this.

11-05-2013, 09:54 AM	#1882 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 23	You said retarted! Lol Sent with TapAhoe __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

11-05-2013, 11:48 AM	#1884 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 23	Lmao I love this forum sometimes Sent with TapAhoe m3chhawk likes this. __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

11-07-2013, 10:34 PM	#1887 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 23	Soooooo.... yup. Sent with TapAhoe __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

11-05-2013, 03:09 AM	#1880 (permalink)
BlkNismo Track Member Join Date: Sep 2011 Location: USA Posts: 614 Drives: Nismo Rep Power: 15	question regarding the tuning aspect.....the base tune that comes with the turn key kit, is this only set for default wastegate pressure, assuming aprox 6psi? i plan on running a ebc around 7 or 8psi. does this require the tune to be refined?

11-05-2013, 12:02 PM	#1885 (permalink)
Tb09z Base Member Join Date: Apr 2013 Location: Louisiana Posts: 190 Drives: 09-370-blue -m6 Rep Power: 12	Good stuff lol

11-07-2013, 10:48 PM	#1888 (permalink)
Alkatraz Base Member Join Date: May 2013 Location: Perth Posts: 215 Drives: 2008 Skyline 370GT Rep Power: 12	Pre TT Kit Dyno Day tomorrow...... 3 power runs for $30 It's going to be a long gap between these dyno runs and the post TT install runs but it will at least give me some ballpark idea of the gains. UNKNOWN_370 and Dzel like this.

11-08-2013, 08:13 AM	#1889 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 23	Sweet finally some action Sent with TapAhoe __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GTM Performance Engineering 370Z SUPERCHARGER KIT PRESS RELEASE	SAM@GTM	Forced Induction	1161	02-16-2014 09:21 PM
GTM Performance Engineering: Mild 7 A/T Twin Turbo Build	SAM@GTM	Forced Induction	37	12-11-2013 01:23 PM
GTM Performance Engineering: 370Z MHI Twin Turbo Pre-Release	SAM@GTM	Forced Induction	120	09-06-2013 07:21 PM
GTM Performance Engineering stage 2 600hp supercharger kits line-up press release	SAM@GTM	Forced Induction	305	09-27-2012 04:23 PM