GTM Performance Engineering: MHI Twin Turbo Official Release

Dzel · 07-10-2013, 12:19 AM

So water injection sounds like a better and safer deal?

Sent with TapAhoe

Nixlimited · 07-10-2013, 02:16 AM

Quote:

Originally Posted by Dzel

So water injection sounds like a better and safer deal?

Sent with TapAhoe

Wouldn't really say better or safer. Just different and in some ways slightly simpler.

COSMO · 07-10-2013, 08:30 AM

Iam thinking about just sticking with the gtm tune and just turning he boost down a bit and things should be fine.. Looking forward to hearing how easy this new twin turbo install is going to be from you guys...

Chuck33079 · 07-10-2013, 08:35 AM

For reliability, go get a custom tune and explain your concerns to the tuner. Leave it a little richer and don't add so much timing. You can still get plenty of power. The Garrett setup can make far more power than the stock block can handle without meth.

Alstann · 07-10-2013, 10:52 AM

I had a "in-the-shower" kinda thought this morning: Has anyone discussed doing ceramic coating on the manifolds or downpipes for their kits? I was wondering if that was a cost-effective modification, and the associated benefits with ceramic coating.

Chuck33079 · 07-10-2013, 10:56 AM

I had the manifolds, downpipes and hot sides of the turbo ceramic coated. I couldn't tell you how effective it is, since these cars run hot anyway and I have nothing to compare it to. It wasn't too expensive. I'd do it if you have the choice.

SPOHN · 07-10-2013, 01:30 PM

I'm just going to wrap the down pipes and wastegate down pipes. I'm also working on a plan direct air at the turbo manifolds.

Dzel · 07-10-2013, 06:47 PM

I was going to coat all hot side parts and wrap the CBE UP to the mufflers

Sent with TapAhoe

SPOHN · 07-10-2013, 07:31 PM

Quote:

Originally Posted by Dzel

I was going to coat all hot side parts and wrap the CBE UP to the mufflers

Sent with TapAhoe

I don't see no need in wrapping the CBE. It's well beneath or back from the engine compartment where additional heat wouldn't be added.

Chuck33079 · 07-10-2013, 07:41 PM

I'd stop worrying about it after the downpipes end. By then you're out of the engine compartment.

Dzel · 07-10-2013, 08:29 PM

Well here's my reason for that. I heard if you completely wrap everything you have more potential for flames to shoot out I know it sounds stupid but I wanted to try it. I figured since I'll be under there anyway I wanted to bust this myth.

Sent with TapAhoe

megalapagas · 07-10-2013, 09:17 PM

I ordered the IWG and I have a 7AT, any downside to that?

elperuano · 07-10-2013, 09:20 PM

The 7at lol

SPOHN · 07-10-2013, 09:22 PM

Quote:

Originally Posted by megalapagas

I ordered the IWG and I have a 7AT, any downside to that?

No

megalapagas · 07-10-2013, 09:26 PM

Thx I was in pickle debating between EWG or IWG.

07-10-2013, 12:19 AM	#1096 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 23	So water injection sounds like a better and safer deal? Sent with TapAhoe __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

07-10-2013, 08:35 AM	#1099 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29538	For reliability, go get a custom tune and explain your concerns to the tuner. Leave it a little richer and don't add so much timing. You can still get plenty of power. The Garrett setup can make far more power than the stock block can handle without meth. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

07-10-2013, 10:52 AM	#1100 (permalink)
Alstann Track Member Join Date: Oct 2011 Location: South Florida Posts: 882 Drives: 12 PW 370z 6MT Sport Rep Power: 15	I had a "in-the-shower" kinda thought this morning: Has anyone discussed doing ceramic coating on the manifolds or downpipes for their kits? I was wondering if that was a cost-effective modification, and the associated benefits with ceramic coating. __________________ 2012 Pearl White 370Z GReddy Twin Turbo

07-10-2013, 10:56 AM	#1101 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29538	I had the manifolds, downpipes and hot sides of the turbo ceramic coated. I couldn't tell you how effective it is, since these cars run hot anyway and I have nothing to compare it to. It wasn't too expensive. I'd do it if you have the choice. Sh0velMan likes this. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

07-10-2013, 01:30 PM	#1102 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	I'm just going to wrap the down pipes and wastegate down pipes. I'm also working on a plan direct air at the turbo manifolds. __________________

07-10-2013, 08:30 AM	#1098 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 19	Iam thinking about just sticking with the gtm tune and just turning he boost down a bit and things should be fine.. Looking forward to hearing how easy this new twin turbo install is going to be from you guys...

07-10-2013, 06:47 PM	#1103 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 23	I was going to coat all hot side parts and wrap the CBE UP to the mufflers Sent with TapAhoe __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

07-10-2013, 07:41 PM	#1105 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29538	I'd stop worrying about it after the downpipes end. By then you're out of the engine compartment. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

07-10-2013, 08:29 PM	#1106 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 23	Well here's my reason for that. I heard if you completely wrap everything you have more potential for flames to shoot out I know it sounds stupid but I wanted to try it. I figured since I'll be under there anyway I wanted to bust this myth. Sent with TapAhoe __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

07-10-2013, 09:17 PM	#1107 (permalink)
megalapagas Enthusiast Member Join Date: May 2013 Location: McAllen,TX Posts: 457 Drives: '10 370Z Tour A/T Rep Power: 12	I ordered the IWG and I have a 7AT, any downside to that?

07-10-2013, 09:20 PM	#1108 (permalink)
elperuano A True Z Fanatic Join Date: Oct 2011 Location: Southwest FL Posts: 1,374 Drives: G37S Rep Power: 29	The 7at lol

07-10-2013, 09:26 PM	#1110 (permalink)
megalapagas Enthusiast Member Join Date: May 2013 Location: McAllen,TX Posts: 457 Drives: '10 370Z Tour A/T Rep Power: 12	Thx I was in pickle debating between EWG or IWG.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GTM Performance Engineering 370Z SUPERCHARGER KIT PRESS RELEASE	SAM@GTM	Forced Induction	1161	02-16-2014 09:21 PM
GTM Performance Engineering: Mild 7 A/T Twin Turbo Build	SAM@GTM	Forced Induction	37	12-11-2013 01:23 PM
GTM Performance Engineering: 370Z MHI Twin Turbo Pre-Release	SAM@GTM	Forced Induction	120	09-06-2013 07:21 PM
GTM Performance Engineering stage 2 600hp supercharger kits line-up press release	SAM@GTM	Forced Induction	305	09-27-2012 04:23 PM