GTM Performance Engineering: MHI Twin Turbo Official Release

Chuck33079 · 06-10-2013, 01:22 PM

Quote:

Originally Posted by AreJay

So this is Probably a stupid question but do we lose any comforts with this major upgrade in power? Such as cruise control or SRM still working properly?

You don't lose anything with their Garrett kit, so I'd assume everything still works with this one.

megalapagas · 06-10-2013, 05:40 PM

Quote:

Originally Posted by Baer383

1 step colder HKS Part No. 50003-M40HL

i see these are suggested but the Gtr Plugs would be best right? and if i wanted to get Gtr Plugs do they fit easy into the VQ37 and what would be the part number? if yall get me a link to this or if you know it it would be appreciated

khanhvu411 · 06-10-2013, 08:12 PM

Anything about the installation manual yet?

Dzel · 06-10-2013, 08:15 PM

Negative I really want to see it so I can decide if I'm going to put it in or having to wait for an install.

Sent with TapAhoe

khanhvu411 · 06-10-2013, 08:25 PM

It is really a decision point for me if I am going to get the kit now or save enough fund for a complete install from a shop. I just dont want to get the kit and sit on it. My wife will not let me get spend more than 6k and just let it collecting dust

Baer383 · 06-10-2013, 08:32 PM

Quote:

Originally Posted by megalapagas

i see these are suggested but the Gtr Plugs would be best right? and if i wanted to get Gtr Plugs do they fit easy into the VQ37 and what would be the part number? if yall get me a link to this or if you know it it would be appreciated

The GTR plugs will work fine,it is my understanding that the HKS dissipate heat better.
And yes the GTR plugs go right in no issues.

SPOHN · 06-10-2013, 10:57 PM

What's all the hassle about the instructions? It's not going to be that much different from there other kit instructions. Some of the intake piping is different shaped. Don't make it harder than it is.

Chuck33079 · 06-10-2013, 11:13 PM

It should be a hell of a lot easier than the Garrett kit since you're not drilling and tapping the head or upper oil pan.

megalapagas · 06-12-2013, 02:38 AM

Quote:

Originally Posted by Baer383

The GTR plugs will work fine,it is my understanding that the HKS dissipate heat better.
And yes the GTR plugs go right in no issues.

Thx a lot buddy!

mikey1600 · 06-12-2013, 05:26 AM

anyone have any completed builds of this kit yet? awaiting mine

Alstann · 06-12-2013, 09:28 AM

I don't really think this is gonna be a crazy difficult install. ^^

To be honest, there are gonna be at least a dozen of us probably doing the install at the same time. Maybe we can start a thread in a few weeks where we can post questions about the kit, give tips and hints and whatnot? I think it would be a nice thing to add to and to reference to for the 80+ people doing the install.

Whatcha fellas think?

puckshaw · 06-12-2013, 10:12 AM

Quote:

Originally Posted by Alstann

I don't really think this is gonna be a crazy difficult install. ^^

To be honest, there are gonna be at least a dozen of us probably doing the install at the same time. Maybe we can start a thread in a few weeks where we can post questions about the kit, give tips and hints and whatnot? I think it would be a nice thing to add to and to reference to for the 80+ people doing the install.

Whatcha fellas think?

I'm dreading the headers but aside from that, I'm thinking it's going to be pretty straightforward. I have a couple buddies that offered to help, one of which is a mechanic. So I think I'll be in pretty good shape. I think a thread to share tips and tricks for the install is a great idea

SAM@GTM · 06-12-2013, 08:44 PM

We are pleased to announce that our production manifold has made it to our CNC machine center today for final machining process meaning that we are getting closer. As promised, here are some pics.

Sam

SPOHN · 06-12-2013, 08:48 PM

Oh my lord. SEXY!!!!!!!!

Defiantly looks like the flow characteristics are changing for the good.

How many can that machine make a day?

Does that change the design or length of the down pipes? Or is the placement of the mount the same?

MavRick · 06-12-2013, 08:56 PM

Stevie approves...

06-10-2013, 08:15 PM	#904 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 23	Negative I really want to see it so I can decide if I'm going to put it in or having to wait for an install. Sent with TapAhoe __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

06-10-2013, 10:57 PM	#907 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 46 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	What's all the hassle about the instructions? It's not going to be that much different from there other kit instructions. Some of the intake piping is different shaped. Don't make it harder than it is. blackonorange and DEpointfive0 like this. __________________

06-10-2013, 11:13 PM	#908 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	It should be a hell of a lot easier than the Garrett kit since you're not drilling and tapping the head or upper oil pan. SPOHN and Dembflyr like this. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

06-12-2013, 09:28 AM	#911 (permalink)
Alstann Track Member Join Date: Oct 2011 Location: South Florida Posts: 882 Drives: 12 PW 370z 6MT Sport Rep Power: 15	I don't really think this is gonna be a crazy difficult install. ^^ To be honest, there are gonna be at least a dozen of us probably doing the install at the same time. Maybe we can start a thread in a few weeks where we can post questions about the kit, give tips and hints and whatnot? I think it would be a nice thing to add to and to reference to for the 80+ people doing the install. Whatcha fellas think? KaienZ34, SPOHN, DEpointfive0 and 2 others like this. __________________ 2012 Pearl White 370Z GReddy Twin Turbo

06-12-2013, 08:44 PM	#913 (permalink)
SAM@GTM NOT AN ACTIVE SPONSOR. DO NOT BUY Join Date: Dec 2008 Location: CALIFORNIA Posts: 913 Drives: 370Z Rep Power: 18	We are pleased to announce that our production manifold has made it to our CNC machine center today for final machining process meaning that we are getting closer. As promised, here are some pics. Sam SPOHN, Mr.Squeeze, Baer383 and 3 others like this.

06-10-2013, 08:12 PM	#903 (permalink)
khanhvu411 Base Member Join Date: Sep 2012 Location: houston Posts: 144 Drives: 2010 370z Roadster Rep Power: 13	Anything about the installation manual yet?

06-10-2013, 08:25 PM	#905 (permalink)
khanhvu411 Base Member Join Date: Sep 2012 Location: houston Posts: 144 Drives: 2010 370z Roadster Rep Power: 13	It is really a decision point for me if I am going to get the kit now or save enough fund for a complete install from a shop. I just dont want to get the kit and sit on it. My wife will not let me get spend more than 6k and just let it collecting dust

06-12-2013, 05:26 AM	#910 (permalink)
mikey1600 Track Member Join Date: Jul 2010 Location: Brisbane, Australia Posts: 503 Drives: MY11 370z Black Rep Power: 16	anyone have any completed builds of this kit yet? awaiting mine

06-12-2013, 08:48 PM	#914 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 46 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Oh my lord. SEXY!!!!!!!! Defiantly looks like the flow characteristics are changing for the good. How many can that machine make a day? Does that change the design or length of the down pipes? Or is the placement of the mount the same? SAM@GTM and Mr.Squeeze like this. __________________ Last edited by SPOHN; 06-12-2013 at 08:58 PM.

06-12-2013, 08:56 PM	#915 (permalink)
MavRick Base Member Join Date: Feb 2013 Location: atlanta Posts: 66 Drives: 2010 Roadster 6MT Rep Power: 12	Stevie approves... __________________ Miss you, Pops...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GTM Performance Engineering 370Z SUPERCHARGER KIT PRESS RELEASE	SAM@GTM	Forced Induction	1161	02-16-2014 09:21 PM
GTM Performance Engineering: Mild 7 A/T Twin Turbo Build	SAM@GTM	Forced Induction	37	12-11-2013 01:23 PM
GTM Performance Engineering: 370Z MHI Twin Turbo Pre-Release	SAM@GTM	Forced Induction	120	09-06-2013 07:21 PM
GTM Performance Engineering stage 2 600hp supercharger kits line-up press release	SAM@GTM	Forced Induction	305	09-27-2012 04:23 PM