GTM Performance Engineering: MHI Twin Turbo Official Release

lww · 05-06-2013, 01:52 AM

Quote:

Originally Posted by indyn

Mike, can't the kits be shipped earlier than June/July; given the number of ppl signing up and by the time one gets it installed half the summer will be done. Won't give us too much time to enjoy this kit.

I'd much rather run this kit on a nice cool October Saturday afternoon than a scalding hot day in July!

Fall weather makes turbos more fun!

SPOHN · 05-06-2013, 06:55 AM

You guys and if when can get it sooner/ later. You cant get it sooner cause there not ready. And if you want to wait later. Well, wait later. You can't rush production. It is what it is. I'm sure GTM is doing something everyday towards getting these kits out. As much as GTM wants to release this for there selves and us he has to make business work smoothly or else you'd be complaining about that.

COSMO · 05-06-2013, 07:44 AM

Spohn your starting to sound like the new gtm sales rep...

I also had to wait well past my deadline for my tt kit but it was WELL worth it!!!! Their 3' exhaust is next on my wish list.......

roplusbee · 05-06-2013, 09:02 AM

Quote:

Originally Posted by lww

I'd much rather run this kit on a nice cool October Saturday afternoon than a scalding hot day in July!

Fall weather makes turbos more fun!

indyn · 05-06-2013, 11:10 AM

Quote:

Originally Posted by lww

I'd much rather run this kit on a nice cool October Saturday afternoon than a scalding hot day in July!

Fall weather makes turbos more fun!

anything past June/July would be pushing it. Hopefully they'll be shipped at that time.

rhd · 05-06-2013, 11:25 PM

Quote:

Originally Posted by lww

I'd much rather run this kit on a nice cool October Saturday afternoon than a scalding hot day in July!

Fall weather makes turbos more fun!

There not running too damn bad in MAY...

Chuck33079 · 05-07-2013, 08:17 AM

Quote:

Originally Posted by rhd

There not running too damn bad in MAY...

Dude, you're in Montana. It's always turbo weather when you're that far north.

COSMO · 05-08-2013, 10:30 AM

Just a friendly reminder, Be Sure to Make Check Both Turbo's to make sure they are CLOCKED correctly or you will have fitment issues down the road on the things.. Even if one of yours is supposed to be already clocked...... Trust me it will save you a lot of time later...

SPOHN · 05-08-2013, 11:04 AM

Quote:

Originally Posted by cosmogirl

Just a friendly reminder, Be Sure to Make Check Both Turbo's to make sure they are CLOCKED correctly or you will have fitment issues down the road on the things.. Even if one of yours is supposed to be already clocked...... Trust me it will save you a lot of time later...

Not ThAts it's hard. But I wish it was done already.

KaienZ34 · 05-08-2013, 11:12 AM

Quote:

Originally Posted by cosmogirl

Just a friendly reminder, Be Sure to Make Check Both Turbo's to make sure they are CLOCKED correctly or you will have fitment issues down the road on the things.. Even if one of yours is supposed to be already clocked...... Trust me it will save you a lot of time later...

Quote:

Originally Posted by SPOHN

Not ThAts it's hard. But I wish it was done already.

That's just when you make sure the return oil line for the turbo is facing down right?

SPOHN · 05-08-2013, 12:25 PM

Clocking a turbo means rotating the compressor and exhaust housings in relation to the manifold. There's other reason but this is the main reason.

Dzel · 05-08-2013, 07:11 PM

Any new updates?

From my TapAhoe

SPOHN · 05-08-2013, 07:22 PM

Quote:

Originally Posted by Dzel

Any new updates?

From my TapAhoe

Yes. There are none.

Dzel · 05-08-2013, 07:46 PM

:sly: man the Z is just parked in my garage. Waiting patiently....

Sent with TapAhoe

Alstann · 05-11-2013, 12:56 AM

By the way, for all the people who are pre-ordering the kit, lets discuss something:

How much power do you fellas think you want to be putting down? I personally want to run around 500-540whp all day, but I know some will run less, and some will run more (550-600whp). What do you think will be the sweet spot?

I honestly haven't found a ton of information regarding engines blowing up at 550+ whp, only a few cases. I'd wager there are many kits (GTM or otherwise) running at that, or slightly below that have been fine for a while now. That being said, I would be weary of 600whp.

05-06-2013, 06:55 AM	#617 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 46 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	You guys and if when can get it sooner/ later. You cant get it sooner cause there not ready. And if you want to wait later. Well, wait later. You can't rush production. It is what it is. I'm sure GTM is doing something everyday towards getting these kits out. As much as GTM wants to release this for there selves and us he has to make business work smoothly or else you'd be complaining about that. __________________

05-06-2013, 07:44 AM	#618 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 20	Spohn your starting to sound like the new gtm sales rep... I also had to wait well past my deadline for my tt kit but it was WELL worth it!!!! Their 3' exhaust is next on my wish list....... SPOHN, Dzel and faya like this.

05-08-2013, 10:30 AM	#623 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 20	Just a friendly reminder, Be Sure to Make Check Both Turbo's to make sure they are CLOCKED correctly or you will have fitment issues down the road on the things.. Even if one of yours is supposed to be already clocked...... Trust me it will save you a lot of time later... SPOHN likes this.

05-08-2013, 12:25 PM	#626 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 46 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Clocking a turbo means rotating the compressor and exhaust housings in relation to the manifold. There's other reason but this is the main reason. COSMO likes this. __________________

05-08-2013, 07:11 PM	#627 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 23	Any new updates? From my TapAhoe __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

05-08-2013, 07:46 PM	#629 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 23	:sly: man the Z is just parked in my garage. Waiting patiently.... Sent with TapAhoe __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

05-11-2013, 12:56 AM	#630 (permalink)
Alstann Track Member Join Date: Oct 2011 Location: South Florida Posts: 882 Drives: 12 PW 370z 6MT Sport Rep Power: 15	By the way, for all the people who are pre-ordering the kit, lets discuss something: How much power do you fellas think you want to be putting down? I personally want to run around 500-540whp all day, but I know some will run less, and some will run more (550-600whp). What do you think will be the sweet spot? I honestly haven't found a ton of information regarding engines blowing up at 550+ whp, only a few cases. I'd wager there are many kits (GTM or otherwise) running at that, or slightly below that have been fine for a while now. That being said, I would be weary of 600whp. __________________ 2012 Pearl White 370Z GReddy Twin Turbo

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GTM Performance Engineering 370Z SUPERCHARGER KIT PRESS RELEASE	SAM@GTM	Forced Induction	1161	02-16-2014 09:21 PM
GTM Performance Engineering: Mild 7 A/T Twin Turbo Build	SAM@GTM	Forced Induction	37	12-11-2013 01:23 PM
GTM Performance Engineering: 370Z MHI Twin Turbo Pre-Release	SAM@GTM	Forced Induction	120	09-06-2013 07:21 PM
GTM Performance Engineering stage 2 600hp supercharger kits line-up press release	SAM@GTM	Forced Induction	305	09-27-2012 04:23 PM