GTM Performance Engineering: MHI Twin Turbo Official Release

blackonorange · 04-25-2013, 11:27 PM

release date

tower74 · 04-25-2013, 11:28 PM

Quote:

Originally Posted by blackonorange

release date

NEVER!!!

zakimak · 04-25-2013, 11:42 PM

Quote:

Originally Posted by Nixlimited

Take my word for it, this kit with proper supporting mods and install will still be > 10K. Totally worth it, though.

I am on the list and out of curiosity what additional items are needed. I have a 6mt

blackonorange · 04-25-2013, 11:54 PM

Clutch, upgraded Csc and oil cooler. Bam your done

tower74 · 04-25-2013, 11:54 PM

Quote:

Originally Posted by zakimak

I am on the list and out of curiosity what additional items are needed. I have a 6mt

Spark plugs, oil cooler, if you are not getting the turn key, then a basic fuel system upgrade---fuel pump upgrade plus injectors, maybe a clutch and exhaust.

The last two are if you want to try to get the most from these kits without doing an engine build...

SPOHN · 04-26-2013, 12:15 AM

Some supporting mods can be a must and some can be held out on but be ready.

Spark Plugs: It was said it can run on stock plugs. But one step colder is your best bet. Helps reduce temps which aids with pre detonation. $160-$180.

Clutch: The kit can push some good number and pending that along with how many miles are on the car now and you have treated so far. The stock can handle a good bit. In due time the day will come. So with a clutch and HD CSC about $1200-$2000.

Oil Cooler: Should already have one if not get it. 34R $700

Others can be radiator, shroud, fans, boost controller, and A/F gauge. Just depends on how serious, how much, and how hard you going to drive. And if you don't already have a good exhaust.

zakimak · 04-26-2013, 12:49 AM

Quote:

Originally Posted by SPOHN

Some supporting mods can be a must and some can be held out on but be ready.

Spark Plugs: It was said it can run on stock plugs. But one step colder is your best bet. Helps reduce temps which aids with pre detonation. $160-$180.

Clutch: The kit can push some good number and pending that along with how many miles are on the car now and you have treated so far. The stock can handle a good bit. In due time the day will come. So with a clutch and HD CSC about $1200-$2000.

Oil Cooler: Should already have one if not get it. 34R $700

Others can be radiator, shroud, fans, boost controller, and A/F gauge. Just depends on how serious, how much, and how hard you going to drive. And if you don't already have a good exhaust.

Thanks...looks like I am in decent shape. Subconsciously I've been choosing what seems to be the items needed for boost..

.

Greddy ti
z1 34 row cooler
Oil temp gauge
Oil pressure gauge
BOOST gauge....

MX52Z · 04-26-2013, 01:13 AM

I would add a wideband O2 in there somewhere.

What the heck are these spark plugs that cost up to $180??

SPOHN · 04-26-2013, 01:34 AM

Quote:

Originally Posted by MX52Z

I would add a wideband O2 in there somewhere.

What the heck are these spark plugs that cost up to $180??

HKS one step colder and NGK plugs that are also one step colder. HKS has the advantage. They help reduce temps which helps with pre detonation. Also has something to do with timing.

MX52Z · 04-26-2013, 01:47 AM

Thank you. I've been using colder plugs over the years for other FI applications but those have usually been $1-$2 a piece. Just blown away at the price of Z plugs and just wondering if it's necessary to change since they're already in the colder 8 range for a stock (non FI) motor to begin with.

SPOHN · 04-26-2013, 01:50 AM

Quote:

Originally Posted by MX52Z

Thank you. I've been using colder plugs over the years for other FI applications but those have usually been $1-$2 a piece. Just blown away at the price of Z plugs and just wondering if it's necessary to change since they're already in the colder 8 range for a stock (non FI) motor to begin with.

Yea I'm not sure what are plugs are. But the stock plugs still can be ran with this kit. I believe the HKS plugs are GTR plugs also.

Dzel · 04-26-2013, 02:02 AM

Yup you can run the stock gtr plus

Footloose301 · 04-26-2013, 06:05 AM

Quote:

Originally Posted by SPOHN

You will not want to make adjustments to the wastegates. These is where a boost controller is needed. Also help with boost creep and spike. But that usually has to do with types of setups and exhaust types. But this kit was made around these two ideas so this will most likely not happen. But why not have another fail safe along with the ability to adjust boost. I'll run lower boost on street/ track then high boost when someone needs to be taught a lesson.

Gotcha. Yeah this is why many prefer external waste gates I suppose.

Is there any reason the HKS electronic boost controller like the evc 6 will NOT work with this internal wastegates?

I want to be able to adjust between 8-11psi.

SPOHN · 04-26-2013, 06:50 AM

Quote:

Originally Posted by Footloose301

Is there any reason the HKS electronic boost controller like the evc 6 will NOT work with this internal wastegates?

I thought it would of. I'll have to find out if so.

Alstann · 04-26-2013, 07:57 AM

Quote:

Originally Posted by tower74

I know but why can't we have the same option on the turn-key. That's what I would like to know. I mean hell the kit is the same.

Sam / Mike will work something out with the external wastegate kit - that's what I pre-ordered. I ordered it in the turn-key setup...along with a few extra special goodies.

Just waiting on final price and ship date!

04-25-2013, 11:54 PM	#469 (permalink)
blackonorange A True Z Fanatic Join Date: Jul 2011 Location: Saskatchewan Posts: 1,078 Drives: 09 370z Rep Power: 16	Clutch, upgraded Csc and oil cooler. Bam your done zakimak likes this.

04-26-2013, 12:15 AM	#471 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Some supporting mods can be a must and some can be held out on but be ready. Spark Plugs: It was said it can run on stock plugs. But one step colder is your best bet. Helps reduce temps which aids with pre detonation. $160-$180. Clutch: The kit can push some good number and pending that along with how many miles are on the car now and you have treated so far. The stock can handle a good bit. In due time the day will come. So with a clutch and HD CSC about $1200-$2000. Oil Cooler: Should already have one if not get it. 34R $700 Others can be radiator, shroud, fans, boost controller, and A/F gauge. Just depends on how serious, how much, and how hard you going to drive. And if you don't already have a good exhaust. Dzel, zakimak and megalapagas like this. __________________ Last edited by SPOHN; 04-26-2013 at 12:21 AM.

04-26-2013, 02:02 AM	#477 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 23	Yup you can run the stock gtr plus __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GTM Performance Engineering 370Z SUPERCHARGER KIT PRESS RELEASE	SAM@GTM	Forced Induction	1161	02-16-2014 09:21 PM
GTM Performance Engineering: Mild 7 A/T Twin Turbo Build	SAM@GTM	Forced Induction	37	12-11-2013 01:23 PM
GTM Performance Engineering: 370Z MHI Twin Turbo Pre-Release	SAM@GTM	Forced Induction	120	09-06-2013 07:21 PM
GTM Performance Engineering stage 2 600hp supercharger kits line-up press release	SAM@GTM	Forced Induction	305	09-27-2012 04:23 PM

04-25-2013, 11:27 PM	#466 (permalink)
blackonorange A True Z Fanatic Join Date: Jul 2011 Location: Saskatchewan Posts: 1,078 Drives: 09 370z Rep Power: 16	release date

04-26-2013, 01:13 AM	#473 (permalink)
MX52Z Enthusiast Member Join Date: Dec 2012 Location: Port Charlotte, FL Posts: 471 Drives: Z'less por ahora Rep Power: 12	I would add a wideband O2 in there somewhere. What the heck are these spark plugs that cost up to $180??

04-26-2013, 01:47 AM	#475 (permalink)
MX52Z Enthusiast Member Join Date: Dec 2012 Location: Port Charlotte, FL Posts: 471 Drives: Z'less por ahora Rep Power: 12	Thank you. I've been using colder plugs over the years for other FI applications but those have usually been $1-$2 a piece. Just blown away at the price of Z plugs and just wondering if it's necessary to change since they're already in the colder 8 range for a stock (non FI) motor to begin with.