GTM Performance Engineering: MHI Twin Turbo Official Release

SPOHN · 04-20-2013, 04:29 PM

Quote:

Originally Posted by Dzel

Yes I'm building my car for track use only after I do a little damage to the stock block at 10 psi for a year or so. 700 is my magic number and this can be achieved with GTM's stroker kit some bottom end work and some MOAR boost!

IMO 450 is about good enough for most tracks. If its a tight track a NA can smoke you. I wouldn't want big HP with all that lag for road courses. So many variables.

Baer383 · 04-20-2013, 04:36 PM

I think stock power is too much ,I'm going back to my prius.

NitrousZ34 · 04-20-2013, 04:36 PM

Quote:

Originally Posted by SPOHN

I think he was referring to a hole package. Built motor, TT kit itself, and all the goodies that go with making a 800 HP car. Full out return fuel system, built heads, and if he went with a full stand alone ECU. That's easy territory.

Also I like the fact that this MHI kit with 18G turbos on a built motor will put down some serious numbers. I don't think you would have to upgrade to Garret turbos. Maybe just rebuild the ones you have while your there. You'd be more than happy enough.

I thought he was talking about just a built motor. Of course it can be that much. It could even be more than that with all the higher end parts. I guess only time will tell what I end up doing

airikrankin · 04-20-2013, 04:44 PM

any chance of getting pics of the manifolds? i would also like to see the setup and down pipes for the ext wg

SPOHN · 04-20-2013, 05:17 PM

^ can't be to much different from there other kits. There's only so much room that things can be routed/ mounted.

I also have to come up with some more dough to run blowoff valves.hehe

Footloose301 · 04-20-2013, 05:27 PM

I'm wondering whether I should install the kit as it comes and then add the guages and clutch and other misc stuff as I come up with the money OR should I let it collect dust until I get everything around....

Keeping an eye on boost would be nice

SPOHN · 04-20-2013, 06:34 PM

Boost gauge would be my first. I wait to see how long the clutch can go. No real sense in changing it till. But you never know. Lol

tower74 · 04-20-2013, 06:44 PM

Quote:

Originally Posted by NitrousZ34

I wouldn't be able to afford the Garret kit right now and if everything can be switched out to the Garret kit, then it makes sense to do so if its cheaper. I could have fun with this kit with a stock block, and when I'm ready to build, go ahead and swap stuff out to make some big power.

Tower how in the hell does it cost $34k to build a motor lol. Please tell me if I'm wrong or something isn't right here... But my friend just built his VQ35HR for about $6k. Carillo rods, Carillo Pistons, Jwt cams, full valvetrain (not sure exactly what brand) ARP bolts, plus other little things and it literally came out to be $6K. The 35HR isn't that much different than the 37vhr. Say a motor build costs around $10k, paired with a $9k turbo kit that can handle 800rwhp... I'm good with that

Stage 5 fuel system: $3400-----Have to feed the girl
New 4.2L with core : $15,400----was going to keep original engine as a back up.
Boost controller, race logic t/c..to control the hp, new clutch to handle the power, new exhaust, gauges etc.
You can't just thrown in a few parts and hop for the best with 800hp. You need to control it and make sure everything else will not explode the first time you get on it.
But hey good luck with your thought of you only need an engine build and larger turbo

tower74 · 04-20-2013, 06:47 PM

Quote:

Originally Posted by airikrankin

any chance of getting pics of the manifolds? i would also like to see the setup and down pipes for the ext wg

Go to Sam's page on here. He has a full photo layout of this kit.

SPOHN · 04-20-2013, 06:51 PM

Nissan 370Z Forum - SAM@GTM's Album: GTM TDO5-H 20,18 AND 16 G TURBO KIT - Picture

Dzel · 04-20-2013, 06:52 PM

Quote:

Originally Posted by SPOHN

Boost gauge would be my first. I wait to see how long the clutch can go. No real sense in changing it till. But you never know. Lol

tower74 · 04-20-2013, 06:52 PM

Quote:

Originally Posted by Footloose301

I'm wondering whether I should install the kit as it comes and then add the guages and clutch and other misc stuff as I come up with the money OR should I let it collect dust until I get everything around....

Keeping an eye on boost would be nice

Agree with SPOHN, gauges and then the clutch. If you are planning to pull more out the kit then a 3" exhaust and clutch upgrade is a must. Like everyone else has said a thousand times on here...550whp is as far as you should take a stock block anyways.

tower74 · 04-20-2013, 06:53 PM

Quote:

Originally Posted by SPOHN

Nissan 370Z Forum - SAM@GTM's Album: GTM TDO5-H 20,18 AND 16 G TURBO KIT - Picture

Why you gotta one up me?

Baer383 · 04-20-2013, 06:55 PM

Quote:

Originally Posted by tower74

Stage 5 fuel system: $3400-----Have to feed the girl
New 4.2L with core : $15,400----was going to keep original engine as a back up.
Boost controller, race logic t/c..to control the hp, new clutch to handle the power, new exhaust, gauges etc.
You can't just thrown in a few parts and hop for the best with 800hp. You need to control it and make sure everything else will not explode the first time you get on it.

The fun you will have when you are done PRICELESS

Baer383 · 04-20-2013, 06:56 PM

Quote:

Originally Posted by tower74

Why you gotta one up me?

Because he's short

04-20-2013, 04:36 PM	#362 (permalink)
Baer383 A True Z Fanatic Join Date: Aug 2010 Location: Lawrenceville,Ga Posts: 4,293 Drives: My foot up your azz Rep Power: 30	I think stock power is too much ,I'm going back to my prius. OMGWTFBBQ, Dzel, tower74 and 1 others like this. __________________ 2013 ZL1 754 rwhp 747 rwtq

04-20-2013, 05:17 PM	#365 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	^ can't be to much different from there other kits. There's only so much room that things can be routed/ mounted. I also have to come up with some more dough to run blowoff valves.hehe __________________

04-20-2013, 05:27 PM	#366 (permalink)
Footloose301 A True Z Fanatic Join Date: Apr 2010 Location: Naples, FL Posts: 2,659 Drives: 40th Rep Power: 21	I'm wondering whether I should install the kit as it comes and then add the guages and clutch and other misc stuff as I come up with the money OR should I let it collect dust until I get everything around.... Keeping an eye on boost would be nice __________________ 2010 40th Anniversary 370Z Last edited by Footloose301; 04-20-2013 at 06:44 PM.

04-20-2013, 06:34 PM	#367 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Boost gauge would be my first. I wait to see how long the clutch can go. No real sense in changing it till. But you never know. Lol tower74 likes this. __________________

04-20-2013, 06:51 PM	#370 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Nissan 370Z Forum - SAM@GTM's Album: GTM TDO5-H 20,18 AND 16 G TURBO KIT - Picture tower74 likes this. __________________

04-20-2013, 04:44 PM	#364 (permalink)
airikrankin Base Member Join Date: Jan 2012 Location: pittsburgh Posts: 115 Drives: 12 370z Rep Power: 13	any chance of getting pics of the manifolds? i would also like to see the setup and down pipes for the ext wg

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GTM Performance Engineering 370Z SUPERCHARGER KIT PRESS RELEASE	SAM@GTM	Forced Induction	1161	02-16-2014 09:21 PM
GTM Performance Engineering: Mild 7 A/T Twin Turbo Build	SAM@GTM	Forced Induction	37	12-11-2013 01:23 PM
GTM Performance Engineering: 370Z MHI Twin Turbo Pre-Release	SAM@GTM	Forced Induction	120	09-06-2013 07:21 PM
GTM Performance Engineering stage 2 600hp supercharger kits line-up press release	SAM@GTM	Forced Induction	305	09-27-2012 04:23 PM