GTM Performance Engineering: MHI Twin Turbo Official Release

Mike@GTM

Yes, these graphs are with our new Mustang dyno that reads 6.61% lower than our old DynoJet.

Here are the numbers for the top graph:

11psi 91 octane
494.4 RWHP (527.1 Dynojet equivalent)
395.9 RWTQ (422.1 Dynojet equivalent)
(82% more than stock)

G37sHKS

Turbo kicks in around 3k RPM.. now that's something nice to see!!

__________________

rAiN

So does that means, install the kits and im good to go?

G37sHKS

Yes, you do need oil cooler first

__________________

370zrider

So these graphs are with 3" test pipes + 3" catback...

Do you have these numbers with 2.5" test pipes + 2.5" catback or a stock configuration?

elperuano

I think u mean 3" downpipe. Not test pipe

SAM@GTM

This car here in this thread has these configurations you are after .

GTM Performance Engineering: GTM TD05 16G Test Results 91 Octane 7AT

Sam

370zrider

yes, 3" downpipes.

Thank you Sam

SAM@GTM

Your welcome. Here is the dyno graph .

Mike@GTM

Well, this car currently has some pre-production parts on it. The exhaust manifold it has is version 2 of our manifold that does not require drilling and tapping the cylinder heads. Here is a picture of it below.


The final version is going to be based on the CAD drawing we posted earlier.

As for your request for pictures of an oil cooler installed with this kit, click on the link below to see my previous post with pictures.
GTM Performance Engineering: 370Z MHI Twin Turbo Pre-Release

A 3" true dual turbo-back exhaust is almost always a nice addition, but not a necessity unless your power goals call for it.

You can make 500whp with that combination all day long...with either the 16g's or 18g's with 2.5" or 3" exhaust.

Yes, we offer our pipes done in gloss black for $240. We can have other, custom colors done, but they are generally more expensive and not always readily available.

The test car with 18g's has our 3" downpipes with external wastegates and our 3" cat-back exhaust. The dyno results are with our version 2 pre-production manifold that does not require drilling and tapping the cylinder head. We will be doing some additional testing with our upcoming manifold you saw the CAD drawings for once we have the pre-production versions of those in hand.

As for the 16g install, we have a car here courtesy of Nixlimited that is getting that setup. Stay tuned for results on that.

The intercooler setup on the red Z was necessary to clear the hood latch support brackets the Z has. The G37 doesn't have those support brackets and can therefore support the intercooler version you saw in the CAD drawings and layout pictures without modification. That said, we developed new hood latch support braces that gives us an additional 2" of clearance so we can run the same intercoolers on both the G37 and 370Z while supporting the hood latch properly. In addition, the extra clearance allows us to run a wider, taller core on the 370Z than what the red Z currently has. The red Z currently has 10" x 10" x 3" intercooler cores while the production cores with the new support braces are 12" x 12" x 3" cores. Also, the new end-tanks are going to be polished, cast aluminum tanks as opposed to the sheet metal prototype end tanks you see in the pictures of the red Z.

Here is a picture of the support bracket I'm talking about:


As far as CARB approval on this kit goes, we will be going after that as soon as we're finished with CARB approval on the 370Z Supercharger kit.

Yes, that shouldn't be an issue and people have installed our Garrett based turbo kits in their garages on jack stands.

Footloose301

Can't. Wait.

__________________

2010 40th Anniversary 370Z

Ipl 370gt

Isn't this the Dyno from the IPL?

__________________
2012 IPL - Volk G12 Wheels | Amuse R-Titan Exhaust | GTM stg 2 TT| Top Secret Titan Pipe | Top Secret Aragosta Coilovers | Cusco Strut Bar | Cusco Sways

tower74

Thanks again Mike!! I'm sure there are a few more things I may need to add to that list but I can't wait! Such as, powder coating the pipes black.

SS_Firehawk

Well, subbing again, my random fake cursing was removed haha. A lot of good info in here. Are these the same intercoolers on the twin SC's as well? They look the same.

__________________

Dzel

The intercoolers on the red car in the picture are not the same on the picture of the kit. Is there a rain fir this

__________________
10secWS6
IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.