GTM Performance Engineering: MHI Twin Turbo Official Release

Dzel

What was the point off that vid? Did the turbine get stripped some how?

Sent with TapAhoe now Free

__________________
10secWS6
IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

SPOHN

Thats how well a double ball bearing turbo spools with no airflow. Journal bearing turbos stop spinning seconds after. So that vid shows greatness.

__________________

G37sHKS

Here how ball bearings work.


Now imagine that on turbo but with dual ball bearings instead that comes with GTX

__________________

Alstann

Ya'll should see experimental air foil bearings - almost zero friction while spinning.

__________________

G37sHKS

You cant beat this.

This Dualboost turbo from Honeywell is the best turbo ever.
Gasoline DualBoost Turbo | Honeywell Turbo Technologies

Double the power, much smaller, better fuel efficiency, double side blades, better spool, torque comes much sooner.. what else you can ask for?

Source: Gasoline DualBoost Turbochargers | Light Vehicle Gasoline Engines | Our Technologies | Honeywell Turbo Technologies

__________________

m3chhawk

Dual wheel, axial flow, with variable veins

__________________

Chuck33079

I'd love to see something like that on a Z, but aren't VNT turbos huge? Do we have room for something like that?

__________________
2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

m3chhawk

Not sure you would see the benefit. From memory, I think they are designed for low-speed, small (2.0L), diesel engines.

__________________

Mike@GTM

UPDATE: First off, I apologize for the delay in getting the schedule up on the boards. Sam had to have an emergency brain surgery last Thursday. As some of you know, he had broken his leg a little while back. Unfortunately, a blood clot formed in his leg and traveled up to his brain which caused some serious neurological issues. Last week, his condition worsened and he ended up having to take a ride in the ambulance to the ICU. The surgery was a success and thankfully, Sam is alive and on the road to recovery. While he is healing, he is not able to be here 24/7 like he used to, so please bear with us as Sam gets better and back up to 100%.

Now, for some good news: as a reward for bearing with us for as long as many of you have, we are offering the Garrett ball bearing turbos as a no-cost upgrade to those that want some ball bearing goodness. Normally, this would be quite a bit more expensive, but we are offering it to those that want to take advantage of it. For comparison purposes, the 16g is comparable to the GT2860RS turbos with a 0.64 A/R turbine housing. The 18g is similar in response to the GT2860RS with the 0.86 A/R turbine housing in terms of response, but the 18g has an advantage in power. That said, the stock engine is realistically only capable of sustaining up to ~630chp for a daily driven application. So, even though the 2860RS turbos with the 0.86 A/R turbine housings are “only” capable of 700chp and the 18g turbos are capable of 800chp, it’s a moot point on a stock engine. Now, if you are going to be running a built engine and want a turbo comparable to the 18g, then Garrett’s GT2871R with the 0.64 A/R turbine housing is the answer. That said, it is a significantly more expensive turbo and we simply cannot offer it as a free upgrade at this price point, but as a $400 upgrade.

We will be posting a schedule as soon as Sam and I have an opportunity to catch up on the expected delivery times from our suppliers.

m3chhawk

Well that's ironic (Garrett bb upgrade) given the conversation here today....

Anyway, there are things in life that are far more important than boost. Best of luck to Sam and a speedy recovery.

__________________

SPOHN

That's why I threw it out there like that.

I told you guys would be happy. Now this kit will be kicking a$$. Now who has the best bang for the buck?

__________________

Mkai0

Hope Sam gets well soon.

__________________
Eibach, Tanabe, Blitz, Vertini, GTM stage 1.5 SC, Aquamist, Invidia, Alto built 5AT, Edge Racing, Racelogic, GTM driveshaft, 440 whp in 101F TX heat..

Nixlimited

Pencil me in for the GT2860RS. But what about the GTX2860R?

And please tell Sam to get well soon!

__________________
Car Sold! Pleasure being a part of the Z community.
New ride: 2015 GT-R - 647 WHP / 641 WTQ (e85) & 543 WHP / 519 WTQ (91)

Chuck33079

Wow. That's pretty damn scary. Glad he pulled through. That's something that can end you in a hurry. Pass along all of our best wishes.

__________________
2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

SS_Firehawk

Best of luck on Sam's recovery. It's terrible hearing more bad news since picking up mine a couple weeks ago. But what a great offer for these guys. That's fantastic! Who doesn't like free turbo upgrades?

__________________