APS 3.5 Downpipe Fitment on GTM?

SPOHN · 03-03-2013, 06:30 PM

It's not went higher. Hell it's to high as is. Example, two Greddy gauge holders cost $5 each. Weigh hardly 5oz. $40 shipping.

COSMO · 03-03-2013, 07:59 PM

Yea I hate to say it but some company's do fudge on the shipping for a little extra dough... I research everything before I buy because money is tight these days... Iam hoping in about 5 years I can pickup a 2012 gtr for a decent price.

COSMO · 03-05-2013, 09:14 PM

Well at this point I think Iam going to contact aps to just see if anyone has tried to fit their 3.5' downpipes to the gtm kit. I was quoted $543 shipped for the 3' gtm ones. Does that sound a bit high for downpipes or is it just me???

O&G · 03-06-2013, 07:56 PM

Found some aps 3.5s at the shop today and thought of u. Let me know if u need some measurements.

sent from my Samsung Galaxy Note

COSMO · 03-06-2013, 08:04 PM

Correct me if Iam wrong but isnt both kits designed to work with the factory exhaust? Now I know the 350z is not a 370z but Iam wondering if might work.. Hey is there a way to plug those open dump ports?? Also check and see if the drivers side has a notch into the piping to clear the steering colum...

elperuano · 03-06-2013, 08:35 PM

Should go into this project expecting to modify the downpipes. I highly doubt they would jus bolt upright. No way of telling until ur at that point.
Also no one has done this before so no one can tell you.

COSMO · 03-06-2013, 09:04 PM

Hey O&G pm me on a price for just the pipes...

O&G · 03-06-2013, 09:39 PM

Pipes belong to the orange 350 so cant sell....sry....they did however impress me.....super beefy....let me knw if i can help

sent from my Samsung Galaxy Note

O&G · 03-06-2013, 09:40 PM

Id suspect they bolt up to the turbo but not the catback.....just my 2 cents....i saw no notch on the driver side pipe.

sent from my Samsung Galaxy Note

COSMO · 05-07-2013, 08:18 AM

Well stop stalking me homo..

03-03-2013, 06:30 PM	#16 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 46 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	It's not went higher. Hell it's to high as is. Example, two Greddy gauge holders cost $5 each. Weigh hardly 5oz. $40 shipping. COSMO likes this. __________________

03-06-2013, 08:04 PM	#20 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 20	Correct me if Iam wrong but isnt both kits designed to work with the factory exhaust? Now I know the 350z is not a 370z but Iam wondering if might work.. Hey is there a way to plug those open dump ports?? Also check and see if the drivers side has a notch into the piping to clear the steering colum... Last edited by COSMO; 03-06-2013 at 08:06 PM.

03-06-2013, 09:39 PM	#23 (permalink)
O&G A True Z Fanatic Join Date: Nov 2010 Location: Lone Star State Age: 42 Posts: 1,212 Drives: 40th Anv. Rep Power: 23	Pipes belong to the orange 350 so cant sell....sry....they did however impress me.....super beefy....let me knw if i can help sent from my Samsung Galaxy Note __________________ O&G's Build/Journal <---(1st lowmount single turbo treeseventy) Built Engine Thread 2011 F-250 Build/Journal

03-06-2013, 09:40 PM	#24 (permalink)
O&G A True Z Fanatic Join Date: Nov 2010 Location: Lone Star State Age: 42 Posts: 1,212 Drives: 40th Anv. Rep Power: 23	Id suspect they bolt up to the turbo but not the catback.....just my 2 cents....i saw no notch on the driver side pipe. sent from my Samsung Galaxy Note __________________ O&G's Build/Journal <---(1st lowmount single turbo treeseventy) Built Engine Thread 2011 F-250 Build/Journal Last edited by O&G; 03-07-2013 at 12:15 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Should I buy megan racing downpipe and y pipe????	dbkustomz	Intake/Exhaust	7	01-08-2012 12:19 PM
ERZ performance Nissan 370z Catted downpipe	ERZperformance	ERZperformance	0	12-09-2009 07:03 AM
Header-Downpipe gasket & Stillen CBE Allignment	DannyGT	Intake/Exhaust	21	04-24-2009 12:35 PM
370Z Downpipe?	ADmaster71690	Engine & Drivetrain	20	03-22-2009 12:56 PM

03-03-2013, 07:59 PM	#17 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 20	Yea I hate to say it but some company's do fudge on the shipping for a little extra dough... I research everything before I buy because money is tight these days... Iam hoping in about 5 years I can pickup a 2012 gtr for a decent price.

03-05-2013, 09:14 PM	#18 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 20	Well at this point I think Iam going to contact aps to just see if anyone has tried to fit their 3.5' downpipes to the gtm kit. I was quoted $543 shipped for the 3' gtm ones. Does that sound a bit high for downpipes or is it just me???

03-06-2013, 08:35 PM	#21 (permalink)
elperuano A True Z Fanatic Join Date: Oct 2011 Location: Southwest FL Posts: 1,374 Drives: G37S Rep Power: 29	Should go into this project expecting to modify the downpipes. I highly doubt they would jus bolt upright. No way of telling until ur at that point. Also no one has done this before so no one can tell you.

03-06-2013, 09:04 PM	#22 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 20	Hey O&G pm me on a price for just the pipes...

05-07-2013, 08:18 AM	#25 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 20	Well stop stalking me homo..