Forced Induction & 7AT 370z Info

shadow85 · 07-30-2021, 09:03 PM

Does anyone have or know anyone who has experience with a built transmission from Pure Transmission?

I only just recently heard about them, and curious to know how well they hold up with high hp/tq.

So far I know of:

1. Level 10 - stay away, lots of horror stories
2. IPT - hit and miss from what hear from customers
3. RJM - seems to have gone quiet on their trans or I haven't hear anything from their 7AT customers.
4. Fast Intentions - only build inhouse
5. Pure Drivetrain Solutions - only just heard about them

redondoaveb · 07-30-2021, 09:45 PM

Quote:

Originally Posted by shadow85

Does anyone have or know anyone who has experience with a built transmission from Pure Transmission?

I only just recently heard about them, and curious to know how well they hold up with high hp/tq.

So far I know of:

1. Level 10 - stay away, lots of horror stories
2. IPT - hit and miss from what hear from customers
3. RJM - seems to have gone quiet on their trans or I haven't hear anything from their 7AT customers.
4. Fast Intentions - only build inhouse
5. Pure Drivetrain Solutions - only just heard about them

6. CJM/Specialty Z- bmw dct

shadow85 · 07-30-2021, 10:49 PM

Quote:

Originally Posted by redondoaveb

6. CJM/Specialty Z- bmw dct

Yes I know about this one too, been following it for a while.
But the setup, wiring etc sounds to be very compliacted.

I am unsure if I could trust anyone in Australia to perform such a setup, and it sounds like it is going to cost almost 2x a built 7AT setup.

rspray2000 · 11-18-2021, 03:00 PM

Just found this blog post yesterday, and they were very responsive in getting back to me via email. They offer bellhousing modification, powder coating and they sell steel and Al driveshafts.

https://www.godzillaraceworks.com/te...ur-zg-platform

Elmo370z · 11-18-2021, 03:39 PM

Quote:

Originally Posted by rspray2000

Just found this blog post yesterday, and they were very responsive in getting back to me via email. They offer bellhousing modification, powder coating and they sell steel and Al driveshafts.

https://www.godzillaraceworks.com/te...ur-zg-platform

Definitely a good swap for less then $1000

rspray2000 · 11-18-2021, 06:58 PM

Quote:

Originally Posted by Elmo370z

Definitely a good swap for less then $1000

It’s going to be more than that for me. I found a low mileage (37k) trans for $800 delivered, driveshaft $550, oil, then figure out what I want to do for drilling housing, and that’s if I do it myself.

Tractionless · 11-25-2021, 09:39 AM

Quote:

Originally Posted by rspray2000

It’s going to be more than that for me. I found a low mileage (37k) trans for $800 delivered, driveshaft $550, oil, then figure out what I want to do for drilling housing, and that’s if I do it myself.

Keep us updated please and/or make a DIY.

Here's some more info. with video but it wasn't into a Z. Seeing the Godzilla webpage is promising that the trans fits in the Z unibody with modification.

VR transmission swap

Elmo370z · 11-25-2021, 02:33 PM

Quote:

Originally Posted by rspray2000

It’s going to be more than that for me. I found a low mileage (37k) trans for $800 delivered, driveshaft $550, oil, then figure out what I want to do for drilling housing, and that’s if I do it myself.

Guess the price has gone up. The guy who first did the swap on the g37, cost him $500.

FrankEtier · 11-30-2021, 10:18 AM

I'm looking into this swap with Godzilla. Does anyone know if the VR30 Red Sport 7AT is different than any other VR30TT 7AT? Are the internals the same? Chris at Godzilla thinks they are but couldn't positively confirm... My stock 7AT with Trans Cooler and Billet Flexplate is holding up for now but this upgrade will give me some good piece of mind...

DarkJak · 11-30-2021, 10:31 AM

May be going this route in lieu of the BMW DCT swap. I could sell that DCT and cover most if not all the costs of doing the Q50 7AT swap.

A part of me wants to just do the SC kit first and run it till the stock 7AT goes though, and maybe by then we get more info on the 9G Tronic in the new Z and if that might be retrofitted somehow (am not hopeful though, and certainly can't just swap controllers over.)

FrankEtier · 11-30-2021, 11:33 AM

Quote:

Originally Posted by DarkJak

May be going this route in lieu of the BMW DCT swap. I could sell that DCT and cover most if not all the costs of doing the Q50 7AT swap.

A part of me wants to just do the SC kit first and run it till the stock 7AT goes though, and maybe by then we get more info on the 9G Tronic in the new Z and if that might be retrofitted somehow (am not hopeful though, and certainly can't just swap controllers over.)

I have about 1000 miles on my supercharged 370Z with the stock 7AT and Billet Flexplate and trans cooler. No issues from stock trans yet but I am aware of the limitations and have not repeatedly beat on the car. I am pretty mindful of the trans temps....

rspray2000 · 12-01-2021, 04:42 PM

Quote:

Originally Posted by Elmo370z

Guess the price has gone up. The guy who first did the swap on the g37, cost him $500.

Yeah, it seems to have. Mine has 37k miles and with delivery mine was easily 50% less than all others I saw advertised for the last few months. Speaking of, just got it dropped off!

FrankEtier · 12-01-2021, 04:45 PM

Quote:

Originally Posted by rspray2000

Yeah, it seems to have. Mine has 37k miles and with delivery mine was easily 50% less than all others I saw advertised for the last few months. Speaking of, just got it dropped off!

Bought off Ebay? How much?

rspray2000 · 12-01-2021, 04:45 PM

Quote:

Originally Posted by FrankEtier

I'm looking into this swap with Godzilla. Does anyone know if the VR30 Red Sport 7AT is different than any other VR30TT 7AT? Are the internals the same? Chris at Godzilla thinks they are but couldn't positively confirm... My stock 7AT with Trans Cooler and Billet Flexplate is holding up for now but this upgrade will give me some good piece of mind...

I’ve seen 2-3 posts/articles that all claim the Red Sport is the same. My only wonder now is if I need to do billet flex plate as well. I’ve heard the DOJ billet one doesn’t fit with the swap whereas the FI does.

rspray2000 · 12-01-2021, 04:45 PM

Quote:

Originally Posted by FrankEtier

Bought off Ebay? How much?

Yup, $800 from eBay shipped from FL to MA.

11-30-2021, 10:18 AM	#339 (permalink)
FrankEtier Base Member Join Date: Jul 2019 Location: McKinney, TX Age: 49 Posts: 145 Drives: 2014 370Z SC Rep Power: 11605	I'm looking into this swap with Godzilla. Does anyone know if the VR30 Red Sport 7AT is different than any other VR30TT 7AT? Are the internals the same? Chris at Godzilla thinks they are but couldn't positively confirm... My stock 7AT with Trans Cooler and Billet Flexplate is holding up for now but this upgrade will give me some good piece of mind... __________________ ‘14 Topgunz Speedworks Rotrex Supercharged VR30 7AT 370Z Magma Red. @liquid.magma

11-30-2021, 10:31 AM	#340 (permalink)
DarkJak A True Z Fanatic Join Date: Jun 2011 Location: Madison, WI Posts: 1,397 Drives: 2009 370Z Rep Power: 16804	May be going this route in lieu of the BMW DCT swap. I could sell that DCT and cover most if not all the costs of doing the Q50 7AT swap. A part of me wants to just do the SC kit first and run it till the stock 7AT goes though, and maybe by then we get more info on the 9G Tronic in the new Z and if that might be retrofitted somehow (am not hopeful though, and certainly can't just swap controllers over.) __________________ @stupidtoycars \| My track vids 09 7AT\|MCS 2WNR\|Topgunz Rotrex\|Ecutek (Eugene)\|Maxxis RC1\|Titan-7 TS-5\|OSG LSD\|Rear Mount Derale Oil Cooler (WIP)+25 Trans Cooler\|Fismo\|G-LOC R12/R10\|Zeta III L\|NLR Wing and Splitter\|CJM Pan and Fuel Hat\|Radium Surge Tank\|AP Racing CP9668

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
forced induction in australia	andylena	Australia/New Zealand	23	09-15-2016 01:52 PM
Forced Induction Reliability	spearfish25	Forced Induction	58	09-08-2013 01:14 PM
Forced induction	stiso	Northern California Region	8	11-28-2011 01:03 PM
Help don't want forced induction!!!!!	Mjthind	Engine & Drivetrain	64	05-04-2011 02:00 PM
Forced induction	Seth G	Forced Induction	13	04-09-2010 01:36 AM

07-30-2021, 09:03 PM	#331 (permalink)
shadow85 Track Member Join Date: Jul 2015 Location: South Australia, Austra Posts: 918 Drives: 15' 370Z A/T AMM TT Rep Power: 25	Does anyone have or know anyone who has experience with a built transmission from Pure Transmission? I only just recently heard about them, and curious to know how well they hold up with high hp/tq. So far I know of: 1. Level 10 - stay away, lots of horror stories 2. IPT - hit and miss from what hear from customers 3. RJM - seems to have gone quiet on their trans or I haven't hear anything from their 7AT customers. 4. Fast Intentions - only build inhouse 5. Pure Drivetrain Solutions - only just heard about them

11-18-2021, 03:00 PM	#334 (permalink)
rspray2000 Base Member Join Date: Mar 2019 Location: MA Posts: 167 Drives: 2013 T/S Roadster AT Rep Power: 4234	Just found this blog post yesterday, and they were very responsive in getting back to me via email. They offer bellhousing modification, powder coating and they sell steel and Al driveshafts. https://www.godzillaraceworks.com/te...ur-zg-platform