Forced Induction & 7AT 370z Info

Kazzan11236

So, ive read throught multiple pages of this thread a few times

So pretty much, with a 7AT fully stock, can handle the stillen supercharger but not for long reliability?

Of course with the trans cooler, oil cooler, exhuast , tune... Trans is still bound to fail?

My thing is, when on the highway, im usually not in manual mode, and thats when i do most of the spirited driving... Overtaking cars and such... And it seems from reading gear 5-7 is the most dangerous where u cant push the car hard.... And i love stomping on the acceleration on the highway...

Just seems counter productive for me to go FI

__________________
Amuse Kit (arrived, in garage waiting for paint =\ ) || Stillen CAI || Stillen HFC || Stillen CBE || ijdmtoy LED package || ijdmtoy LED 4th Brake Light || Halos (BKNGO #ZDADDY) || Philips Crystal Vision Ultra 5K HIDs || JVC KW-V50BT || Rockford T1s (3200watts max)

brucelidat

I think you'll be okay with the stock SC kit since that's only around 300 wtrq.

__________________
Works Emotion CR Ultimate - FI CBE w/ 18" resonators - Ecutek - eibach sways - Quaife - FI LTH w/race cats - kw v3 - spl - Topgunz SC - 488whp 398trq

EliteXpress

I boost often up top with my S/C Auto, not afraid to go! The other night had a few pulls to a Buck 40 plus and one to 157 MPH and was still ready for more.

cycy89

Picked up my car today from Fast Intentions and it feels absolutely amazing! The transmission works flawlessly. Now time to drive back to Texas!

Sent from my SM-G928T using Tapatalk

__________________
Fast Intentions Twin Turbo Kit GT2860RS, 677WHP|FI 34 row oil cooler|F.I. CBE|Fast 500E return fuel system|FI trans cooler|FI billet aluminum flex plate|Excedy clutch packs|ENKEI RP03|BC BR coilovers|SEIBON Carbon|EVO-R Rear fog light|GTR push start|Whiteline sway bars, Diff bushing|DSS axles|ECUTekW/FlexFuelTune

Kazzan11236

7at?

__________________
Amuse Kit (arrived, in garage waiting for paint =\ ) || Stillen CAI || Stillen HFC || Stillen CBE || ijdmtoy LED package || ijdmtoy LED 4th Brake Light || Halos (BKNGO #ZDADDY) || Philips Crystal Vision Ultra 5K HIDs || JVC KW-V50BT || Rockford T1s (3200watts max)

jchammond

How long does it take to go 0-157?

__________________
MazWorx built long block | FI-TT-100 Stage 2.75 | IPT built 7A/T

http://www.the370z.com/members-370z-...s-musings.html

jwick

Where would you ever be that you could figure that out. Texas Mile is all I can think of.

__________________
'10 G37T 6MT Graphite/Graphite - BP - G37T Build

cycy89

"Mexico"

Sent from my SM-G928T using Tapatalk

__________________
Fast Intentions Twin Turbo Kit GT2860RS, 677WHP|FI 34 row oil cooler|F.I. CBE|Fast 500E return fuel system|FI trans cooler|FI billet aluminum flex plate|Excedy clutch packs|ENKEI RP03|BC BR coilovers|SEIBON Carbon|EVO-R Rear fog light|GTR push start|Whiteline sway bars, Diff bushing|DSS axles|ECUTekW/FlexFuelTune

Kazzan11236

__________________
Amuse Kit (arrived, in garage waiting for paint =\ ) || Stillen CAI || Stillen HFC || Stillen CBE || ijdmtoy LED package || ijdmtoy LED 4th Brake Light || Halos (BKNGO #ZDADDY) || Philips Crystal Vision Ultra 5K HIDs || JVC KW-V50BT || Rockford T1s (3200watts max)

jwick

So central Texas...gotcha

__________________
'10 G37T 6MT Graphite/Graphite - BP - G37T Build

jchammond

Mine does it in 30sec. Stock


Sent from my iPhone using Tapatalk

__________________
MazWorx built long block | FI-TT-100 Stage 2.75 | IPT built 7A/T

http://www.the370z.com/members-370z-...s-musings.html

StillenZ84

Im 7AT with 440HP and 320TQ and mine just gave out on me with the Stillen SC and smaller pulley after 8,000 miles. Going the Level 10 route as we speak.

__________________
AtA SC|9 lb pulley|2.85" SC|3.47" Jack|E85|CJM S1-SE|ID1000s|Walboro 485|Zeitronix FF|Stillen CBE|AP Racing|Level 10|F.I. Flex plate|Nismo-S tune|EcuTek RaceRom|Sebz|Speed density|Haltech|3GsCustoms Dual pod a-pillar|Carbon Signal GTR gauges|Fujimura|Built| CP Pistons/Carrillo rods|PortPolishHeads/intakes|928motorsports IG: evanosteenz34

Lt8Che

Level 10 is a stand up shop and does great work for our 7A/T's. I had mine done with their "bulletproof" package rated to 700whp.

I had a chance to visit them as well when they had my car and the guys at the shop are very personable and take time to do things right.

I have a complete write up on myg37: Review Level 10 Performance Transmissions - MyG37

StillenZ84

Good deal. Thats the package I am going with also. The worst part is being without a car for 1 1/2 weeks being that i'm in Oklahoma and have to wait for shipping and such. Lol Ima check out your write up.

__________________
AtA SC|9 lb pulley|2.85" SC|3.47" Jack|E85|CJM S1-SE|ID1000s|Walboro 485|Zeitronix FF|Stillen CBE|AP Racing|Level 10|F.I. Flex plate|Nismo-S tune|EcuTek RaceRom|Sebz|Speed density|Haltech|3GsCustoms Dual pod a-pillar|Carbon Signal GTR gauges|Fujimura|Built| CP Pistons/Carrillo rods|PortPolishHeads/intakes|928motorsports IG: evanosteenz34

G37Some

it goes fast tho. I ordered my 5at from them on a saturday right before they were closing. they built it on monday/tuesday, shipped it and arrived in tampa on thursday. they were extremely professional and caring and easy to deal with.

unfortunately i'm still waiting to get my car back with built motor/turbo kit/level10 tranny.

7at is a different monster, but i know their 5at is currently on a twin turbo fx35 putting down 900whp on racegas. near 1000whp it started having some slight issues so was sent in for adjustments even though it was after their warranty period they are still improving it for freeee!

__________________
instagram : @TurboG37