Fast Intentions "Twin Turbo Kit" is here

VSS370z · 05-07-2013, 04:36 PM

Quote:

Originally Posted by dirTy_shoeZ

i heard a fast intentions exhaust for the first time on the dyno a few days ago and before i even knew what it was i said it sounded really good. I would definitely recommend someone to buy their product, much less the 3". I've only heard the sound clip of this one and it sounds very clean and crisp aswell.

I can't wait to hear it with the twin turbos!

F.I. Inc. · 05-07-2013, 04:49 PM

Quote:

Originally Posted by BlkNismo

Tony,

Is there going to be an official press release for this dual 3" tdx exhaust?

Actually you are correct. I have never officially released pricing for the 3" exhaust. We had originally planned on doing the official release at the same time as the TT kit but the kit kept getting delayed. The official release will come shortly for the exhaust but for now, here is the pricing.

Option #1:
Stainless steel mufflers, non res X Pipe: $1,475 USD

Option #2:
Stainless steel mufflers, non res X Pipe w/100 Cell Mil Spec HFC: $2,000 USD

The options on this CBE are much more simplified over the current 2.50" which has resonators as an option. We are very skeptical to add resonators to this setup in 3" due to the amount of heat generated by the turbochargers. We feel that the packing in the resonators will not hold up to that heat over time. In addition there is not a Carbon Fiber option (yet) available. We plan to offer it down the road. Shipping charges are not included in the cost of the options above and are as follows:

48 lower USA (states):
West Coast: $90 USD
Mid West: $115 USD
East Coast: $135 USD

If anyone has any questions please do not hesitate to call us directly.

Thank you, Tony

Nixlimited · 05-07-2013, 08:08 PM

Quote:

Originally Posted by F.I. Inc.

Actually you are correct. I have never officially released pricing for the 3" exhaust. We had originally planned on doing the official release at the same time as the TT kit but the kit kept getting delayed. The official release will come shortly for the exhaust but for now, here is the pricing.

Option #1:
Stainless steel mufflers, non res X Pipe: $1,475 USD

Option #2:
Stainless steel mufflers, non res X Pipe w/100 Cell Mil Spec HFC: $2,000 USD

The options on this CBE are much more simplified over the current 2.50" which has resonators as an option. We are very skeptical to add resonators to this setup in 3" due to the amount of heat generated by the turbochargers. We feel that the packing in the resonators will not hold up to that heat over time. In addition there is not a Carbon Fiber option (yet) available. We plan to offer it down the road. Shipping charges are not included in the cost of the options above and are as follows:

48 lower USA (states):
West Coast: $90 USD
Mid West: $115 USD
East Coast: $135 USD

If anyone has any questions please do not hesitate to call us directly.

Thank you, Tony

Any trade-in options on our 2.5" CBEs?

Chuck33079 · 05-07-2013, 09:26 PM

Quote:

Originally Posted by F.I. Inc.

Actually you are correct. I have never officially released pricing for the 3" exhaust. We had originally planned on doing the official release at the same time as the TT kit but the kit kept getting delayed. The official release will come shortly for the exhaust but for now, here is the pricing.

Option #1:
Stainless steel mufflers, non res X Pipe: $1,475 USD

Option #2:
Stainless steel mufflers, non res X Pipe w/100 Cell Mil Spec HFC: $2,000 USD

The options on this CBE are much more simplified over the current 2.50" which has resonators as an option. We are very skeptical to add resonators to this setup in 3" due to the amount of heat generated by the turbochargers. We feel that the packing in the resonators will not hold up to that heat over time. In addition there is not a Carbon Fiber option (yet) available. We plan to offer it down the road. Shipping charges are not included in the cost of the options above and are as follows:

48 lower USA (states):
West Coast: $90 USD
Mid West: $115 USD
East Coast: $135 USD

If anyone has any questions please do not hesitate to call us directly.

Thank you, Tony

And Tony can get the cans powder coated black if you're looking to cut down on the bling of the stainless cans.

mfeinst · 05-07-2013, 11:36 PM

Quote:

Originally Posted by Chuck33079

And Tony can get the cans powder coated black if you're looking to cut down on the bling of the stainless cans.

Sweeeet.

Chuck33079 · 05-08-2013, 12:06 AM

Quote:

Originally Posted by Chuck33079

And Tony can get the cans powder coated black if you're looking to cut down on the bling of the stainless cans.

Correction. Mine were ceramic coated, not powder coated.

Nismodean · 05-09-2013, 01:59 AM

Quote:

Originally Posted by Nixlimited

Any trade-in options on our 2.5" CBEs?

Yep, right here!

SgtGoldy · 05-09-2013, 02:19 AM

any word on when the G37 application will be available? Im thinking of taking advantage of your financing option (shhh... dont tell my wife... Seriously, any of the guys that knows me personally dont do it. You'll ruin my chances... lol)

Sales@F.I. Inc. · 05-09-2013, 10:59 AM

Quote:

Originally Posted by SgtGoldy

any word on when the G37 application will be available? Im thinking of taking advantage of your financing option (shhh... dont tell my wife... Seriously, any of the guys that knows me personally dont do it. You'll ruin my chances... lol)

We do not have a set ETA yet, however we will not forget about you guys!

SgtGoldy · 05-09-2013, 11:05 AM

looking forward to it

hey if you need an R&D Im here for ya... lol

F.I. Inc. · 05-09-2013, 08:13 PM

Quote:

Originally Posted by F.I. Inc.

To All,

An update and nice surprise is coming for all of those who follow and are interested late next week.

This one you will all want to stay tuned for!

Thanks, Tony

The update on this will be within a few hours. Stay tuned...

Tony

Rusty · 05-09-2013, 08:23 PM

KaienZ34 · 05-09-2013, 08:36 PM

Quote:

Originally Posted by F.I. Inc.

The update on this will be within a few hours. Stay tuned...

Tony

roplusbee · 05-09-2013, 10:30 PM

So what is wrong with the polished look?

F.I. Inc. · 05-09-2013, 11:04 PM

Update,

Over the past six weeks or so we have been very quiet here on the forum. It is much pleasure that I can finally share with you why...

Below you will see a handful of pictures showing the new look of our prototype Twin Turbo 370z. In some of the pictures you will see the car being loaded in to an enclosed trailer. Next stop Forged Performance in Atlanta, Georgia. From there she will be babysat for a few days. Myself, Dan, Blake (Car owner) and Mike from our crew are flying to Forged Performance late next Tuesday night. (A small crew will stay back and man the fort for phone calls and such.) From there the Forged crew and Fast intentions crew will embark on the journey to none other than ZDayZ 2013!

We will showcase the car at the Forged sponsored "Top Dawg Challenge". For those of you who do not know, this event is located at the Hendersonville regional airport in Hendersonville, NC. It is a rolling drag race grudge match right on the airstrip. After that we are off to the official ZDayZ resort where our car will be located in the Forged Performance booth.

4 of us from Fast Intentions, Inc. will be on hand to answer any and all questions regarding our products. There will be literature on the Twin Turbo kit for all to take and T Shirts for sale. In addition we will be giving (selective) demo rides in the Twin Turbo 370z to serious potential buyers. Most importantly we will be there to meet and greet our previous and future customers.

Words cannot describe how much work it has been to get the Z ready for this event. It is all worth it though to be able to support the community face to face at one of the baddest Z events on the planet! We are very excited to meet our customers in person and could not of even considered this event without all of your loyalty and support over the past decade.

To close, all of us at Fast Intentions, Inc. want to thank Sharif and the entire staff at Forged Performance for hosting us next week. They are great people to know. We are proud to be partnering with them and look forward to a promising future working together.

I hope that this post comes with enough notice for some of you that have been on the fence about making the trek to ZDayZ will now decide to come.

Thank you all for your time.

Tony

05-09-2013, 02:19 AM	#1013 (permalink)
SgtGoldy A True Z Fanatic Join Date: Feb 2009 Location: Orange County, CA Posts: 3,503 Drives: C63 AMG - LSD Rep Power: 650	any word on when the G37 application will be available? Im thinking of taking advantage of your financing option (shhh... dont tell my wife... Seriously, any of the guys that knows me personally dont do it. You'll ruin my chances... lol) __________________ C63 AMG LSD - Straight Pipe - EuroCharge v5 - Vossen CV7 - IG: @SuperFastYo

05-09-2013, 11:05 AM	#1015 (permalink)
SgtGoldy A True Z Fanatic Join Date: Feb 2009 Location: Orange County, CA Posts: 3,503 Drives: C63 AMG - LSD Rep Power: 650	looking forward to it hey if you need an R&D Im here for ya... lol __________________ C63 AMG LSD - Straight Pipe - EuroCharge v5 - Vossen CV7 - IG: @SuperFastYo

05-09-2013, 08:23 PM	#1017 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,217 Drives: 2011 Nismo GM 6M Rep Power: 2684438	__________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

05-09-2013, 10:30 PM	#1019 (permalink)
roplusbee A True Z Fanatic Join Date: Dec 2009 Location: Killeen, TX Posts: 2,360 Drives: 2007 350Z NISMO Rep Power: 23	So what is wrong with the polished look? __________________ 2007 350Z NISMO #0618: Zerolift \| UPREV \| F.I. \| Greddy \| Competition Clutch \| Injector Dynamics \| Aeromotive \| Pioneer \| JL

05-09-2013, 11:04 PM	#1020 (permalink)
F.I. Inc. The370Z.com Sponsor Join Date: Feb 2009 Location: Simi Valley, CA Posts: 2,989 Drives: 2010 GT-R/2007 F-250 Rep Power: 685	Fast Intentions, Inc. is ZDayZ 2013 bound! Update, Over the past six weeks or so we have been very quiet here on the forum. It is much pleasure that I can finally share with you why... Below you will see a handful of pictures showing the new look of our prototype Twin Turbo 370z. In some of the pictures you will see the car being loaded in to an enclosed trailer. Next stop Forged Performance in Atlanta, Georgia. From there she will be babysat for a few days. Myself, Dan, Blake (Car owner) and Mike from our crew are flying to Forged Performance late next Tuesday night. (A small crew will stay back and man the fort for phone calls and such.) From there the Forged crew and Fast intentions crew will embark on the journey to none other than ZDayZ 2013! We will showcase the car at the Forged sponsored "Top Dawg Challenge". For those of you who do not know, this event is located at the Hendersonville regional airport in Hendersonville, NC. It is a rolling drag race grudge match right on the airstrip. After that we are off to the official ZDayZ resort where our car will be located in the Forged Performance booth. 4 of us from Fast Intentions, Inc. will be on hand to answer any and all questions regarding our products. There will be literature on the Twin Turbo kit for all to take and T Shirts for sale. In addition we will be giving (selective) demo rides in the Twin Turbo 370z to serious potential buyers. Most importantly we will be there to meet and greet our previous and future customers. Words cannot describe how much work it has been to get the Z ready for this event. It is all worth it though to be able to support the community face to face at one of the baddest Z events on the planet! We are very excited to meet our customers in person and could not of even considered this event without all of your loyalty and support over the past decade. To close, all of us at Fast Intentions, Inc. want to thank Sharif and the entire staff at Forged Performance for hosting us next week. They are great people to know. We are proud to be partnering with them and look forward to a promising future working together. I hope that this post comes with enough notice for some of you that have been on the fence about making the trek to ZDayZ will now decide to come. Thank you all for your time. Tony XwChriswX, Tward and Z370Z011 like this. __________________ *Follow us on Facebook: Fast Intentions Inc.* Phone: (805) 522-FAST (3278) Email: tony@fastintentions.com www.fastintentions.com "FUELED BY PASSION" Last edited by F.I. Inc.; 05-09-2013 at 11:14 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fast Intentions 3" (Twin Turbo) exhaust is here!	F.I. Inc.	Intake/Exhaust	91	02-08-2017 06:09 AM
Fast Intentions "Twin Turbo Kit" Official Release	F.I. Inc.	Drivetrain/Engine	95	11-20-2014 12:38 AM
Twin Turbo vs. Single Turbo V6: A Dissertation	Mike@GTM	Forced Induction	115	08-14-2014 10:04 PM
Twin scroll vs twin turbo	SS_Firehawk	Forced Induction	32	04-13-2014 01:02 PM
GTM Motorsports Twin Turbo vs Greddy Twin Turbo Kit	Nismo221	Forced Induction	57	08-16-2011 05:44 PM

*****Fast Intentions "Twin Turbo Kit" is here*****

Fast Intentions "Twin Turbo Kit" is here