Awesome!:)


Sent from my iPhone using Tapatalk- faya baby!

I have attached a dyno chart below that shows how responsive the low end is in our kit. At 3,500 rpm's the car is making 410 lb ft of torque on less than 8 psi. I just took this point because it is still considered "low end". To be quite honest, the kit produces a smoke show with the tires. Now keep in mind we did this with the TiAL .86 A/R. If we were to step down to the TiAL .64 A/R the kit would be even more responsive. It is hard to believe in our minds because we have the car here and see first hand how hard it spools. Once customers start installing it for themselves and getting a chance to drive their cars, they will understand exactly what we are talking about.

There is no drop off in power at any rpm. The car plants you in your seat from the moment you take off until rpm red line.

Thank you for the positive feedback about our products and our company. We are committed to giving you all only the best quality and performance in the same package. No gimmicks, come ons or smoke screens. What you see is what you will make! In fact, most of you who have access to 93 octane should perform slightly better then our test car. Your tuner will be able to add an additional degree or two of timing to your tune which will increase the performance. We are conservative with our ignition timing and 91 octane. You have to be to keep things safe.

http://i371.photobucket.com/albums/o...psd55d7c85.jpg

I think that this covers it all for now. If you have any other questions please do not hesitate to ask.

Thank you, Tony

That's a lot of power right off the bat... This thing is monstrous and HP just keeps getting abundantly better throughout the range. I can only imagine the power it would produce on a rebuilt engine and 14psi. Shhhyyyyyyt!!!:tup:

Look at the chart @5200rpm :excited:

Fixed :)

Anybody plz educate me this kit is carb legal :) thxxx

We are currently exploring the option for 49 state smog compliance as well as CARB compliant. The process is not going to be short and there is no guarantee that the approval will come. We will keep you all updated throughout the process. That being said, from day #1 the kit was designed to meet CARB requirements.

Presale list:

001: djtodd
002: VSS370z
003: cycy89
004: dirTy_shoeZ
005:
006:
007:
008:
009:
010:
_____________________________________________

dirTy_shoeZ,

Thank you for the order. It has been a pleasure speaking with you and we are proud to have you on the list with our other customers.

Tony

Tony and the Fast Intentions staff have built a very good kit. This kit with the Tial housing V band housings have such huge potential. With the GTX 2867r turbos I have seen them make well over 700 whp on GTR's I believe this can be done on a 370z as well.

Below is a graph of a GTR with these same turbos just to give everyone one a idea this is on E85


http://imageshack.us/a/img707/2444/gtx2867.jpg

Just got off the phone with Tony, absolutely a stand up guy! Even as I explained that I wasn't 100% ready to purchase the kit yet, we still spoke for about 20 minutes. That wouldn't of happened with any other company. They would of litterally said to call back when I had the money. I am super excited about the connections he is working on especially in my part of the world. As for me I am hoping early next year to be able to purchase the kit headache free. Always a pleasure when dealing with F.I.

Dzel,

Great talking with you the other night. The line is always open if you ever have any questions or when you are ready to place your order.

Thanks, Tony

Thank you for sharing the graph. It shows what these turbochargers can really do when turned up. I have no doubt that we can achieve these numbers on a Z with our TT kit. Every single aspect of our kit is designed for maximum efficiency and it shows in our numbers vs. psi level.

All of that being said we've put so much time, detail, and thought into the design and manufacturing of this kit to give you the very best quality and performance available. Obviously, there is TT competition out there. When designing our TT kit, our intentions were not to compete against any current option, but rather to stand alone in its own class. Ultimately, we want to offer you the high end option. We've chosen to use and manufacture only the best parts, which comes at a price. We realize that our products may not fit into everyone's budget, but we will never compromise our quality. We manufacture the way we do because we're passionate about our what we put out there and creating the very best for our customers. Build quality, fitment, performance, and customer satisfaction is the cornerstone of what FI stands for.

Thank you, Tony

Presale list:

001: djtodd
002: VSS370z
003: cycy89
004: dirTy_shoeZ
005: faceglide
006: XiP
007:
008:
009:
010:
_____________________________________________

faceglide & XiP,

We are proud to add you both to the list with the others. I spoke to you both today and tonight in length. It was all my pleasure. Your business is greatly appreciated and we are really looking forward to seeing our products on your cars.

Thank you, Tony

Tony

Any vendor discounts? :p





Congrats on the accomplishment guys!

Thank you for the positive feedback. We do work with dealers. If you are interested in becoming a dealer, please do not hesitate to call us.

Thank you, Tony

See I knew the list would start to pick up steam after awhile.