Fast Intentions "Twin Turbo Kit" is here

tower74 · 02-04-2013, 09:45 PM

I would rather have them take another month to get us the final pic's and numbers if it means the system is flawless. Good things come to those that wait...So I've been told.

Dzel · 02-05-2013, 01:53 PM

I reach for my wallet every time I see these pics!

SPOHN · 02-05-2013, 02:49 PM

FI what can you say about your product being you have tubular manifolds? I've seen others where there more prone to cracking over typical turbo manifold which is different in everyway. Material, length, and gauge of the walls. But others are obvious not The quality your company.

Sh0velMan · 02-05-2013, 02:54 PM

Quote:

Originally Posted by SPOHN

FI what can you say about your product being you have tubular manifolds? I've seen others where there more prone to cracking over typical turbo manifold which is different in everyway. Material, length, and gauge of the walls. But others are obvious not The quality your company.

These are cast manifolds, they're just made out of stainless steel rather than iron.

They're not tubular in the sense that they are made out of tubes welded together.

It was always the welds that cracked anyway, I'm fairly certain.

TerribleONE · 02-05-2013, 05:00 PM

Quote:

Originally Posted by Sh0velMan

These are cast manifolds, they're just made out of stainless steel rather than iron.

They're not tubular in the sense that they are made out of tubes welded together.

It was always the welds that cracked anyway, I'm fairly certain.

I am pretty sure you hit the nail right on the head here however I am sure Tony will chime in further.

Dzel · 02-05-2013, 03:57 PM

Diddo

SPOHN · 02-05-2013, 04:11 PM

Gottcha. I'm so on the fence of getting this. But personally if I go FI I won't track no more until I can build the motor. That way I can be more confident knowing my motor will hold up better. Course I would only run low boost.

bullitt5897 · 02-05-2013, 04:26 PM

I was browsing around last night and I noticed that these manifolds look eerily similar to the greddy cast manifolds... Is there any difference between these and the greddy ones (in design)?

Mike

bullitt5897 · 02-05-2013, 04:28 PM

I realize that these have vbands and look nicer but was just curious as to what design testing was done

tony could you guys get a little more technical on why you chose this design style?

Mr.Squeeze · 02-05-2013, 05:02 PM

Quote:

Originally Posted by Bullitt@UAMotorsports

I realize that these have vbands and look nicer but was just curious as to what design testing was done

tony could you guys get a little more technical on why you chose this design style?

Not trying to speak for Tony but just looking at the design of these manifolds they will have superior flow to the T25 manifolds that we have on our kits .

There a work of art

Sh0velMan · 02-05-2013, 06:05 PM

If you look at the runner design details, particularly diameter and length, they really aren't that similar to the greddy manifolds. Without being equal length or some other radically different design, they are destined to resemble every other manifold because they're all doing the same job.

It's like saying one tire looks like another because they're both round and made of (mostly) rubber... "Well, yes...." I would say in response.

TerribleONE · 02-05-2013, 07:01 PM

Quote:

Originally Posted by Sh0velMan

If you look at the runner design details, particularly diameter and length, they really aren't that similar to the greddy manifolds. Without being equal length or some other radically different design, they are destined to resemble every other manifold because they're all doing the same job.

It's like saying one tire looks like another because they're both round and made of (mostly) rubber... "Well, yes...." I would say in response.

jvg · 02-05-2013, 08:12 PM

Tomorrow is DYNO DAY!!!! Maybe????

TerribleONE · 02-06-2013, 03:00 AM

Quote:

Originally Posted by jvg

Tomorrow is DYNO DAY!!!! Maybe????

You sir are correct! Everything is still looking good to make this happen as far as I know

Amuse370z · 02-05-2013, 06:51 PM

Wow, looks incredible, I've never cared about a TT kit but, this might just be the one.

Known for the great quality for the exhaust, I have no doubts about the quality of this product.

Estimated price?

Being a total noob at this topic, how does this affect warranty? Can I still take it to Nissan to service? Will the car break down sooner from wear and tear?

02-05-2013, 01:53 PM	#2 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 23	I reach for my wallet every time I see these pics! __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

02-05-2013, 02:49 PM	#3 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 46 Posts: 14,844 Drives: Waiting on next Z Rep Power: 222	FI what can you say about your product being you have tubular manifolds? I've seen others where there more prone to cracking over typical turbo manifold which is different in everyway. Material, length, and gauge of the walls. But others are obvious not The quality your company. __________________

02-05-2013, 03:57 PM	#6 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 23	Diddo __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

02-05-2013, 04:11 PM	#7 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 46 Posts: 14,844 Drives: Waiting on next Z Rep Power: 222	Gottcha. I'm so on the fence of getting this. But personally if I go FI I won't track no more until I can build the motor. That way I can be more confident knowing my motor will hold up better. Course I would only run low boost. __________________

02-05-2013, 04:26 PM	#8 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3683	I was browsing around last night and I noticed that these manifolds look eerily similar to the greddy cast manifolds... Is there any difference between these and the greddy ones (in design)? Mike __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

02-04-2013, 09:45 PM	#1 (permalink)
tower74 A True Z Fanatic Join Date: Oct 2011 Location: KCMO Posts: 1,597 Drives: 2017 ZL1 Camaro Rep Power: 370	I would rather have them take another month to get us the final pic's and numbers if it means the system is flawless. Good things come to those that wait...So I've been told.

02-05-2013, 04:28 PM	#9 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3683	I realize that these have vbands and look nicer but was just curious as to what design testing was done tony could you guys get a little more technical on why you chose this design style? __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

02-05-2013, 06:05 PM	#11 (permalink)
Sh0velMan A True Z Fanatic Join Date: Jan 2012 Location: Dallas/Ft.Worth Posts: 3,349 Drives: Noisily. Rep Power: 21	If you look at the runner design details, particularly diameter and length, they really aren't that similar to the greddy manifolds. Without being equal length or some other radically different design, they are destined to resemble every other manifold because they're all doing the same job. It's like saying one tire looks like another because they're both round and made of (mostly) rubber... "Well, yes...." I would say in response. __________________ Buy My Car! \| Build Thread

02-05-2013, 08:12 PM	#13 (permalink)
jvg Base Member Join Date: Oct 2012 Location: TN Posts: 44 Drives: 2012 370Z AT Rep Power: 13	Tomorrow is DYNO DAY!!!! Maybe???? ts-c63 likes this.

02-05-2013, 06:51 PM	#15 (permalink)
Amuse370z A True Z Fanatic Join Date: Jan 2011 Location: Toronto Posts: 1,170 Drives: '13 PW Fairlady Z Rep Power: 17	Wow, looks incredible, I've never cared about a TT kit but, this might just be the one. Known for the great quality for the exhaust, I have no doubts about the quality of this product. Estimated price? Being a total noob at this topic, how does this affect warranty? Can I still take it to Nissan to service? Will the car break down sooner from wear and tear?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fast Intentions 3" (Twin Turbo) exhaust is here!	F.I. Inc.	Intake/Exhaust	91	02-08-2017 05:09 AM
Fast Intentions "Twin Turbo Kit" Official Release	F.I. Inc.	Drivetrain/Engine	95	11-19-2014 11:38 PM
Twin Turbo vs. Single Turbo V6: A Dissertation	Mike@GTM	Forced Induction	115	08-14-2014 09:04 PM
Twin scroll vs twin turbo	SS_Firehawk	Forced Induction	32	04-13-2014 12:02 PM
GTM Motorsports Twin Turbo vs Greddy Twin Turbo Kit	Nismo221	Forced Induction	57	08-16-2011 04:44 PM

*****Fast Intentions "Twin Turbo Kit" is here*****

Fast Intentions "Twin Turbo Kit" is here