GTM built motor on the way

GaleForce · 04-03-2013, 06:43 PM

Quote:

Originally Posted by Mr.Squeeze

It would be nice to see more built motor TT 370z's out there shoot and join the club my friend.

Does Phunk have a built motor now ? I may have missed it could have sworn it was still stock block on E85.

I want to get my single up to your numbers. Finding someone to build a motor will be the challenge.

roplusbee · 04-04-2013, 12:41 PM

Quote:

Originally Posted by Mr.Squeeze

It would be nice to see more built motor TT 370z's out there shoot and join the club my friend.

Does Phunk have a built motor now ? I may have missed it could have sworn it was still stock block on E85.

I know he has been talking about for a while, not sure if he pulled the trigger though.

Quote:

Originally Posted by GaleForce

I want to get my single up to your numbers. Finding someone to build a motor will be the challenge.

What turbo are you running again? I would think it would have to be a 3582 or higher to put down 650whp

Sent from my D-Team-MT4GS-CM10.1

Mr.Squeeze · 04-04-2013, 02:49 PM

Quote:

Originally Posted by GaleForce

I want to get my single up to your numbers. Finding someone to build a motor will be the challenge.

Finding someone you trust to build you motor can be a little tricky. I have a local machine shop that built my motor that I trust ,and is a friend., You also have R/T Tuning R.A.D over here in the tri state that you could use,then you have GTM as well.

Quote:

Originally Posted by roplusbee

What turbo are you running again? I would think it would have to be a 3582 or higher to put down 650whp

Sent from my D-Team-MT4GS-CM10.1

He has a 6266 precision turbo

theDreamer · 04-04-2013, 02:51 PM

One thing that can always help, adds to cost but is worth it, is shipping the motor.
This opens up who you use and can be setup that you can drop the motor & throw it back in once it is built.

Boosted Performance · 04-04-2013, 03:19 PM

Dynosty in Louisville KY is a great VQ engine builder. I have a lot of customers with engines built by them, and a few really beat these engines to death. They all hold, and perform very well. Give them a call at 502.384.8882 ask for Hal or Dustin. They use the best parts you can get on the market, and have fantastic customer service (something that can be hard to find)

I am about to ship my VQ down there for a long block build.

GaleForce · 04-04-2013, 06:00 PM

Quote:

Originally Posted by roplusbee

I know he has been talking about for a while, not sure if he pulled the trigger though.

What turbo are you running again? I would think it would have to be a 3582 or higher to put down 650whp

Sent from my D-Team-MT4GS-CM10.1

A 6266 Precision Turbo like Mr.Squeeze said.

Quote:

Originally Posted by Mr.Squeeze

Finding someone you trust to build you motor can be a little tricky. I have a local machine shop that built my motor that I trust ,and is a friend., You also have R/T Tuning R.A.D over here in the tri state that you could use,then you have GTM as well.

He has a 6266 precision turbo

I'm going to talk to Vince and the guys at R/T Tuning about the engine build while I'm there.

tturbo370z · 04-05-2013, 03:20 AM

Quote:

Originally Posted by roplusbee

Awesome dude! It has been a long road indeed. You are gonna have to post up your numbers/dyno. That way, I can have 3 targets to shoot for with my build. Yours, Mr Squeeze, and Phunk...............

I'm kinda scared now that I won't have the dynojet to compare with the stage 2 stock block setup

gonna have to get the reem job from the new mustang dyno so I'm not betting on crazy numbers. Hope I'm wrong thou

SS_Firehawk · 07-14-2013, 05:23 PM

Quote:

Originally Posted by tturbo370z

Ya thanks for the condolences. It been a dark nightmare ride but the light is fast approaching with the help from Sam at GTM. We are shooting for 30days for motor work n rebuild. The clutch n HD CSC are ready in and when I was there checking on the car it felt awesome. I will keep posted as progress comes thru. Hoping Sam will send some sort of car porn my way to help get me by and to share with you guys.

Quote:

Originally Posted by elperuano

Unfortunately I have to agree with this, absolutely every single story ive read about them keeping with the "time frame" has gone horribly wrong. Wish u the best of luck OP

Had to go back and read this... I had a good laugh after rereading 8 months later

tturbo370z · 07-14-2013, 05:57 PM

Quote:

Originally Posted by SS_Firehawk

Had to go back and read this... I had a good laugh after rereading 8 months later

Bahahaha

30 days, 8 mos its pretty much the same thing

Counting from the start of this project I have been without car for a year. It got fubar at poo shop and now been at GTM for I think is going on 10mos. I can't wait to get it cuz it's suppose to give me BJs everytime I drive it so its worth the wait.

NOBLE|370Z · 07-19-2013, 10:00 AM

I live in Calgary (Canada) and I was thinking of shipping my engine for a rebuild during the up coming winter. Im a little hesitant now because Im worried it will take 8+ months to get done. Why isn't the engine done yet? Are there reputable shops that can do it in less time? Say 2-3 months? Im thinking the 4.2 stroker and rebuild...

elperuano · 07-19-2013, 10:36 AM

plenty of shops can do it in reasonable time. Just have to research.

Chuck33079 · 07-19-2013, 10:40 AM

Yeah, find someone local or ship it to a good machine shop. GTM makes great stuff, but they've never been referred to as "fast" or "timely". It's not a huge deal if you're building a spare block, but having your car down 8 months becomes an issue.

SPOHN · 07-19-2013, 12:01 PM

So this went from a 30 day job in December till now and not finished. Was any plans changed at anytime? But even then.

SAM@GTM · 07-19-2013, 12:46 PM

John's car has been finished for almost 4 month now. For the magnitude of this job including the custom interior gauge work the time is with reason. I know there is a lot of experts here but that is my opinion. Currently we are waiting on some aero parts from japan. Then will move to the body work phase and we should wrap up the project .

Sam

Chuck33079 · 07-19-2013, 12:50 PM

Four months sounds a lot more reasonable than the 8+ thrown around in this thread.

04-04-2013, 02:51 PM	#94 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4210	One thing that can always help, adds to cost but is worth it, is shipping the motor. This opens up who you use and can be setup that you can drop the motor & throw it back in once it is built. __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

04-04-2013, 03:19 PM	#95 (permalink)
Boosted Performance The370Z.com Sponsor Join Date: Feb 2010 Location: Edmonton, AB Posts: 1,629 Drives: Z's Rep Power: 3382	Dynosty in Louisville KY is a great VQ engine builder. I have a lot of customers with engines built by them, and a few really beat these engines to death. They all hold, and perform very well. Give them a call at 502.384.8882 ask for Hal or Dustin. They use the best parts you can get on the market, and have fantastic customer service (something that can be hard to find) I am about to ship my VQ down there for a long block build. Mr&Mrs and GaleForce like this. __________________ 750WHP starting @ $7,500 to the door FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html FB: https://www.facebook.com/Boosted-Per...6303179791462/ IG @boostedperformanceyeg

07-19-2013, 10:40 AM	#102 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	Yeah, find someone local or ship it to a good machine shop. GTM makes great stuff, but they've never been referred to as "fast" or "timely". It's not a huge deal if you're building a spare block, but having your car down 8 months becomes an issue. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

07-19-2013, 12:01 PM	#103 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	So this went from a 30 day job in December till now and not finished. Was any plans changed at anytime? But even then. __________________ Last edited by SPOHN; 07-19-2013 at 12:29 PM.

07-19-2013, 12:50 PM	#105 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	Four months sounds a lot more reasonable than the 8+ thrown around in this thread. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

07-19-2013, 10:00 AM	#100 (permalink)
NOBLE\|370Z Base Member Join Date: Sep 2011 Location: Calgary AB Posts: 61 Drives: 09 Nissan 370Z Rep Power: 14	I live in Calgary (Canada) and I was thinking of shipping my engine for a rebuild during the up coming winter. Im a little hesitant now because Im worried it will take 8+ months to get done. Why isn't the engine done yet? Are there reputable shops that can do it in less time? Say 2-3 months? Im thinking the 4.2 stroker and rebuild...

07-19-2013, 10:36 AM	#101 (permalink)
elperuano A True Z Fanatic Join Date: Oct 2011 Location: Southwest FL Posts: 1,374 Drives: G37S Rep Power: 29	plenty of shops can do it in reasonable time. Just have to research.

07-19-2013, 12:46 PM	#104 (permalink)
SAM@GTM NOT AN ACTIVE SPONSOR. DO NOT BUY Join Date: Dec 2008 Location: CALIFORNIA Posts: 913 Drives: 370Z Rep Power: 17	John's car has been finished for almost 4 month now. For the magnitude of this job including the custom interior gauge work the time is with reason. I know there is a lot of experts here but that is my opinion. Currently we are waiting on some aero parts from japan. Then will move to the body work phase and we should wrap up the project . Sam

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Real Auto Dynamics built and R/T tuned built motor TT	Mr.Squeeze	Forced Induction	132	04-18-2014 07:09 PM
Anyone have a built motor yet for FI?	GambitX	Forced Induction	61	08-22-2011 10:44 AM
built motor?	toner123	Forced Induction	45	03-23-2011 06:53 PM
09 6 speed 370z Twin Turbo, Built motor. BIG PROB!!	soaka1	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	19	03-07-2011 05:34 PM
Booth Babes of 2009 Essen Motor Show, Los Angeles Auto Show, Tokyo Motor Show etc :D	AK370Z	Gentleman's Club	29	12-07-2009 09:33 PM