Waiting on FI

BG370z · 12-20-2012, 05:06 AM

Quote:

Originally Posted by esfourteen

the 6 spacers are for your strut bar to accommodate the raised engine. that other bracket is not for your car, GTM likely put it in there on accident.

ok-we were thinking perhaps on the steering rack bottom plate(it is quite tight and does not sit properly on one side. the web on inside of plate touches steering rack.

thanks

BG370z · 12-20-2012, 05:08 AM

Quote:

Originally Posted by elperuano

Exactly what I was thinkin, don't recall ever seein that bracket.
Coming along nicely! This is the home stretch now! Is the same shop doing tuning?

the same shop will set up the basic tune but no dyno there so they will take it to another shop for help with the tune

esfourteen · 12-20-2012, 09:00 AM

Quote:

Originally Posted by BG370z

ok-we were thinking perhaps on the steering rack bottom plate(it is quite tight and does not sit properly on one side. the web on inside of plate touches steering rack.

thanks

the instructions are pretty clear, that plate is definitely not used on the steering rack. I got an extra bracket in my kit too but it was a different one, its like a surprise

just some advice as far as tuning goes, Sam's tune was pretty much spot on for my car and most others. AFR can be tweaked a bit but timing there likely won't be much to adjust if at all. if you get it dyno tuned make sure its by a competent tuner so you dont waste your time and money

BG370z · 12-20-2012, 06:49 PM

Quote:

Originally Posted by esfourteen

the instructions are pretty clear, that plate is definitely not used on the steering rack. I got an extra bracket in my kit too but it was a different one, its like a surprise

just some advice as far as tuning goes, Sam's tune was pretty much spot on for my car and most others. AFR can be tweaked a bit but timing there likely won't be much to adjust if at all. if you get it dyno tuned make sure its by a competent tuner so you dont waste your time and money

i think the shop it is in now will do most of the tune and deal with sam

BG370z · 12-20-2012, 07:01 PM

Day 7
Greddy exhaust is on now-beautiful.
intercooler is in place and 34 row oil cooler in place-great
Thats a big capable intercooler-very nice. may take the baffles out from exhaust.The extra plate was for the Greddy exhaust system. Man i am pumped

issue to upload pics today-i will try again later

elperuano · 12-20-2012, 07:19 PM

Wait til that first full boost run u make... THEN you'll feel pumped. I felt like Jafar from Aladdin after he was granted his final wish of being a genie.. The poooowwwwaaaaaaaaaaa!!!!

BG370z · 12-20-2012, 07:29 PM

Quote:

Originally Posted by elperuano

Wait til that first full boost run u make... THEN you'll feel pumped. I felt like Jafar from Aladdin after he was granted his final wish of being a genie.. The poooowwwwaaaaaaaaaaa!!!!

i am guessing you run with vdc off

elperuano · 12-20-2012, 07:35 PM

Is there any other way??

BG370z · 12-21-2012, 08:31 AM

is there an aftermarket water bottle? the intercooler piping kills that space.

Chuck33079 · 12-21-2012, 08:31 AM

GTM makes one. It's not too expensive.

BG370z · 12-21-2012, 08:48 AM

Quote:

Originally Posted by Chuck33079

GTM makes one. It's not too expensive.

thanks i will order one

BG370z · 12-22-2012, 05:37 PM

day 8

intercooler installed,ohh my thats a big one. Lots of piping.
had a small issue with wastegates(seemed two male connection)
shop then machined pcs to fit properly. The new Greddy exhaust is
so cool looking-baffles have to go. Love the look under the engine with the
big intake pipes(but not chrome-i may paint black)the 34 row oil cooler is now on also,tucked neatly away

So i have 3 gauges to mount and have an A-pillar universal mount but shop
not that keen mounting over location close to airbag......what to do?

BG370z · 12-22-2012, 05:46 PM

a few more pics. the new air filters are looking like they are up to
the task

elperuano · 12-22-2012, 06:44 PM

Car porn! Looks good!!

G37Sam · 12-22-2012, 10:49 PM

Quote:

Originally Posted by BG370z

So i have 3 gauges to mount and have an A-pillar universal mount but shop
not that keen mounting over location close to airbag......what to do?

It's almost 2013 man who still uses pillar mount gauges? Here's what I did

12-20-2012, 07:01 PM	#80 (permalink)
BG370z Base Member Join Date: Dec 2010 Location: New Brunswick,Canada Posts: 230 Drives: 2009 Black 370Z Rep Power: 14	Day 7 Greddy exhaust is on now-beautiful. intercooler is in place and 34 row oil cooler in place-great Thats a big capable intercooler-very nice. may take the baffles out from exhaust.The extra plate was for the Greddy exhaust system. Man i am pumped issue to upload pics today-i will try again later elperuano likes this.

12-20-2012, 07:35 PM	#83 (permalink)
elperuano A True Z Fanatic Join Date: Oct 2011 Location: Southwest FL Posts: 1,374 Drives: G37S Rep Power: 29	Is there any other way?? Mr&Mrs and BG370z like this.

12-21-2012, 08:31 AM	#85 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29538	GTM makes one. It's not too expensive. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Waiting and waiting	Terry Repol	New Forum Member	8	08-04-2021 07:00 PM
still waiting	luckylaki	Introduction	1	04-12-2012 02:41 PM
What to do while you are waiting for your Z to get TT	xiven	The Lounge (Off Topic)	22	02-22-2010 01:53 PM
Still waiting...	Randy	New Forum Member	15	07-26-2009 07:45 PM
Waiting	Robert Z	New Forum Member	3	03-27-2009 08:55 AM

12-20-2012, 07:19 PM	#81 (permalink)
elperuano A True Z Fanatic Join Date: Oct 2011 Location: Southwest FL Posts: 1,374 Drives: G37S Rep Power: 29	Wait til that first full boost run u make... THEN you'll feel pumped. I felt like Jafar from Aladdin after he was granted his final wish of being a genie.. The poooowwwwaaaaaaaaaaa!!!!

12-21-2012, 08:31 AM	#84 (permalink)
BG370z Base Member Join Date: Dec 2010 Location: New Brunswick,Canada Posts: 230 Drives: 2009 Black 370Z Rep Power: 14	is there an aftermarket water bottle? the intercooler piping kills that space.

12-22-2012, 06:44 PM	#89 (permalink)
elperuano A True Z Fanatic Join Date: Oct 2011 Location: Southwest FL Posts: 1,374 Drives: G37S Rep Power: 29	Car porn! Looks good!!