Final Results: 350Z Built Twin Turbo
 

Car finished out at 551whp/558wtq peaking at 18psi in the midrange and dropping to 16.5-17.

http://i107.photobucket.com/albums/m...ienPumpGas.jpg

http://i107.photobucket.com/albums/m...58035443_o.jpg



IPP Custom Stage 3 Long Block:
~~ Cosworth Rods, CP 8.5:1 Pistons w/ PolyDyn's Ceramic/Moly coating on the piston tops & skirts
~~ ACL Trust Washers, Main & Rod Bearings
~~ ARP Main Studs & Rod Bolts, L19 Head Studs
~~ ATI Street Damper Crank Pulley
~~ Heads Redecked, Ported Intake/Exhaust Runners, 5-Angle Radius Cut Valve Job
~~ JWT C2 {261* w/ .456 (11.58mm) lift Intake & Exhaust} Cams
~~ JWT Heavy Duty Springs & Shims
~~ Viton Valve Seals
~~ OEM Gasket kit with Cometic Head gaskets
~~ OEM VQ35 "Rev-Up" Oil Pump
~~ OEM VQ35 Pathfinder Rear Cooling By-Pass
~~ Nismo Low Temp Thermostat

Fuel:
~ CJM Stage 2 Return Fuel System w/ Blue Billet Fuel Rails
~ CJM Twin In-Tank Fuel Pumps
~ Injector Dynamics 1000cc Injectors

EMS:
~ HalTech Plug-In Pro ECU Replacement EMS
~~ HalTech Boost Control Solenoid
~~ HalTech Dual Wideband Kit w/ 2 Sensors
~~ Dual Wideband Gauge

Drivetrain:
~ Nissan CD009 (2004+) 6sp Transmission
~~ Carbonetic Twin Disc Carbon Clutch w/ Carbon/Steel Flywheel
~~ Quaife Helical LSD
~~ 3.3 Nissan Auto Final Drive Gear

Exhaust:
~ Greddy RS Cat-Back Exhaust
~ APS 2.5" PolyDyn Coated Downpipes
~ PolyDyn Coated Manifolds & Turbine Housings

You can read the full build thread here; http://www.the370z.com/texas/46893-time-more-boost.html

Those numbers are impressive. Must be pulling like a train after 4.5k. A DE motor too. Congrats. I'm full of envy

Glad your goal was met Robert! I hope to see this car one day. Take me for a spin lol

Sounds like a plan!!! Thanks!!!

Nice numbers, specially torque!

Nicely done!

Thanks guys! Yeah the 35DE is a torque monster compared to the HR. Personally I was willing to give up peak HP for more low-end TQ. Originally I wanted a higher compression ratio but Cosworth phased out their 9.0:1 pistons.

sick Robert!

wow cleanest looking 350z :tup:
nice numbers!

Awesome numbers! How do you like that clutch?

Thanks. Not much wheel time as I'm in Iraq. Last time I was home though didn't take long to get use to the twin disc. Of course not much abuse was put on the car also as I was breaking everything in. I'll be home soon and plan on abusing it a bit more. :)

Ah, understandable. Do you know if they make an application for the 370z?

Be safe in Iraq and get home to enjoy it! Feel free to let me borrow those wheels while you are away! :tup:

Nice build man what kind of turbos do you have on the car? Also in your list of mod's do you mean you have the 3.3 auto gearing? All other 350z's come with 3.5, I have the 3.3 in my 370z.

Good to compare your graph to mine.

Damn man great numbers. Sexy car too.

Not sure on the Z34 application. Check their site; CARBON CLUTCH - CARBONETIC - ACROSS Official Website

And I'm gonna pass on the borrowing of the wheels. :tup:

The JWT kit uses the Garrett GT2860RS turbo (Disco Potatoes). And yes that a type error on the gearing. Thanks for catching it!

Thanks! :tup: