6 puck on the street?

GaleForce · 10-18-2012, 12:42 PM

Anyone here running a 6 puck clutch on the street? If so, how is the drivability?

I'm trying to get a clutch installed before I put my car away. One shop recommended the Z1 6 puck another shop recommends a Southbend TZR.

edub370 · 10-18-2012, 01:52 PM

I imagine that would get a little grabby for dd'ing. my buddy got a clutch taht was a little aggresssive in his sti and it made driving it on the streets hell

JDMFairlady21 · 10-18-2012, 02:09 PM

definitely not going to enjoy dd'ing that setup. i've had custoemrs who insisted on that setup, only to go back and switch it out.

elperuano · 10-18-2012, 02:11 PM

OS giken ftw!

JMac88 · 10-18-2012, 02:36 PM

I use the the specialty Z 6 puck on the street. Other then a slightly firmer pedal it drives like stock. Comes with everything you will need too

98intrigue · 10-18-2012, 02:47 PM

I ran an ACT 6-puck clutch and Fidanza 15lb flywheel in both my G35 and 370Z (both were daily drivers...aka 10-20k miles a year). It never slipped, which was most important to me. The one thing I hated was the consistency of the "grab", but this could have been due to a bad master/slave cylinder.

Yes, the 6-puck is heavier. Yes, at times the clutch would be either in/out with no play. The question is would I buy again? Yes, I would. Don't let it scare you

ANMVQ · 10-18-2012, 03:43 PM

I ran one, ACT 6 puck, the grab was CRAZY, Daily drove the car(11 SEC EVO) Was a little tuff in traffic,, LOL car would hop a little, HAHAH But got used to it. The Clutch kit was vey very good.

GaleForce · 10-18-2012, 05:27 PM

The Z is not my daily driver but is primarily driven on the streets, maybe 2-3 times a week depending on weather. Spec-wise it will be good for the kind of power I'll be putting down. I was just worried about the drivability, thanks for the responses guys

GaleForce · 10-18-2012, 05:29 PM

Quote:

Originally Posted by elperuano

OS giken ftw!

I've heard that's even harder to drive with in traffic. And Cha-Ching!!! $$$$

bullitt5897 · 10-18-2012, 05:40 PM

OS Giken FTW!!! I agree! I have the triple and double and both are like stock but heavier. Not bad in traffic either. My 5'2 wife drove the twin and never complained!

O&G · 10-18-2012, 05:41 PM

Quote:

Originally Posted by 98intrigue

I ran an ACT 6-puck clutch and Fidanza 15lb flywheel in both my G35 and 370Z (both were daily drivers...aka 10-20k miles a year). It never slipped, which was most important to me. The one thing I hated was the consistency of the "grab", but this could have been due to a bad master/slave cylinder.

Yes, the 6-puck is heavier. Yes, at times the clutch would be either in/out with no play. The question is would I buy again? Yes, I would. Don't let it scare you

I have this same setup only running it w/ a JWT flywheel and wouldn't have it any other way. I love the feel. I can't stand stock clutches...yuck!

elperuano · 10-18-2012, 08:39 PM

Quote:

Originally Posted by GaleForce

I've heard that's even harder to drive with in traffic. And Cha-Ching!!! $$$$

It is pricey but not much different feeling for me compared to stock just a little more stiff. Takes getting used to but dd'ing in traffic is fine now.

gabe3d · 10-18-2012, 10:00 PM

I have that clutch on my G35 and IMO it's a very DD-able setup. Not all 6 pucks drive the same and when i tried the ACT it was vastly different. Anyways, if it drives the same on the vhr as it does on my car then i'd recommend it.

Baer383 · 10-18-2012, 10:16 PM

This thread has some good information.

gabe3d · 10-18-2012, 10:24 PM

Forgot to mention that I have the southbend one, not the Z1.

10-18-2012, 12:42 PM	#1 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51865	6 puck on the street? Anyone here running a 6 puck clutch on the street? If so, how is the drivability? I'm trying to get a clutch installed before I put my car away. One shop recommended the Z1 6 puck another shop recommends a Southbend TZR. __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

10-18-2012, 01:52 PM	#2 (permalink)
edub370 A True Z Fanatic Join Date: May 2011 Location: KCMO Posts: 3,458 Drives: 09 370z S/T 6MT Rep Power: 20	I imagine that would get a little grabby for dd'ing. my buddy got a clutch taht was a little aggresssive in his sti and it made driving it on the streets hell __________________ 09 370Z ST 6MT//Injen CAI//Greddy CBE//TP//TSW's//Swifts//Stillen lip//Whiteline sways 326whp/268tq

10-18-2012, 02:09 PM	#3 (permalink)
JDMFairlady21 Enthusiast Member Join Date: Oct 2009 Location: LI, NY Posts: 348 Drives: 03 Z33 TT Redline Rep Power: 16	definitely not going to enjoy dd'ing that setup. i've had custoemrs who insisted on that setup, only to go back and switch it out. GaleForce likes this. __________________ [

10-18-2012, 02:36 PM	#5 (permalink)
JMac88 Enthusiast Member Join Date: Jun 2010 Location: Edmonton AB Posts: 416 Drives: 2010 PW 370z Rep Power: 15	I use the the specialty Z 6 puck on the street. Other then a slightly firmer pedal it drives like stock. Comes with everything you will need too GaleForce likes this. __________________ Full Mod List

10-18-2012, 02:47 PM	#6 (permalink)
98intrigue A True Z Fanatic Join Date: Jul 2010 Location: Clearwater, FL Age: 39 Posts: 4,855 Drives: 2014 Viper Rep Power: 430	I ran an ACT 6-puck clutch and Fidanza 15lb flywheel in both my G35 and 370Z (both were daily drivers...aka 10-20k miles a year). It never slipped, which was most important to me. The one thing I hated was the consistency of the "grab", but this could have been due to a bad master/slave cylinder. Yes, the 6-puck is heavier. Yes, at times the clutch would be either in/out with no play. The question is would I buy again? Yes, I would. Don't let it scare you O&G and GaleForce like this. __________________ Ryan - 2014 Stryker Green Viper Gone - a few Vipers and a couple turbo VQs

10-18-2012, 02:11 PM	#4 (permalink)
elperuano A True Z Fanatic Join Date: Oct 2011 Location: Southwest FL Posts: 1,374 Drives: G37S Rep Power: 29	OS giken ftw!

10-18-2012, 03:43 PM	#7 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 19	I ran one, ACT 6 puck, the grab was CRAZY, Daily drove the car(11 SEC EVO) Was a little tuff in traffic,, LOL car would hop a little, HAHAH But got used to it. The Clutch kit was vey very good. GaleForce likes this. __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

10-18-2012, 05:27 PM	#8 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51865	The Z is not my daily driver but is primarily driven on the streets, maybe 2-3 times a week depending on weather. Spec-wise it will be good for the kind of power I'll be putting down. I was just worried about the drivability, thanks for the responses guys __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

10-18-2012, 05:40 PM	#10 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	OS Giken FTW!!! I agree! I have the triple and double and both are like stock but heavier. Not bad in traffic either. My 5'2 wife drove the twin and never complained! __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

10-18-2012, 10:00 PM	#13 (permalink)
gabe3d Base Member Join Date: Jun 2011 Location: Fresno, Ca Posts: 51 Drives: Old school G Rep Power: 14	I have that clutch on my G35 and IMO it's a very DD-able setup. Not all 6 pucks drive the same and when i tried the ACT it was vastly different. Anyways, if it drives the same on the vhr as it does on my car then i'd recommend it. GaleForce likes this.

10-18-2012, 10:16 PM	#14 (permalink)
Baer383 A True Z Fanatic Join Date: Aug 2010 Location: Lawrenceville,Ga Posts: 4,293 Drives: My foot up your azz Rep Power: 30	This thread has some good information. __________________ 2013 ZL1 754 rwhp 747 rwtq

10-18-2012, 10:24 PM	#15 (permalink)
gabe3d Base Member Join Date: Jun 2011 Location: Fresno, Ca Posts: 51 Drives: Old school G Rep Power: 14	Forgot to mention that I have the southbend one, not the Z1.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
new guy on the street	Rooster89	New Forum Member	2	06-10-2011 02:26 AM
[FOR SALE] RPS High-5 puck clutch and sz flywheel	nismo42	Parts for sale (Private Classifieds)	1	05-14-2011 02:56 PM
Street Racing on LI (Don't do it!)	Cmike2780	The Lounge (Off Topic)	6	03-03-2011 10:12 PM
best street pads?	vortrex	Brakes & Suspension	18	01-11-2010 02:45 PM
This is why I hate street parking	AK370Z	The Lounge (Off Topic)	4	01-10-2010 08:26 PM