NOVIDEM Supercharger Nissan 370Z

swiss370Z · 10-14-2012, 01:13 PM

Hi togehter

Today I was at the premiere of the new supercharger 370Z from NOVIDEM of Switzerland!

Enclosed are the first photos!

IMG_5233.jpg

IMG_5234.jpg

IMG_5235.jpg

Mhhhhhh .... I see no intercooler and the kit looks set up?
Its not the same as the 350Z from the VQ35HR....???

Enjoy...

Greetings from switzerland

Ivo

Jordo! · 10-14-2012, 02:24 PM

Hmm. If boost numbers are modest, non-intercooled could still work well on a budget. Looking forward to additional details and dynos -- the kit looks very clean, and the welds are nice.

Wish someone would make a roots blower kit, tho'

Boosted Performance · 10-14-2012, 02:52 PM

As far as flow goes, that is as bad as it gets. The split after the supercharger outlet is horrible, and the driver side split is welded in the opposite direction of the flow. That is the angle (about 15*) you want if you want to draw slight vacuum.

Quote:

Originally Posted by Jordo!

and the welds are nice.

I disagree.

It also looks like there is an electric clutch on the s/c drive. It means that the s/c could be turned on/off via switch. I am assuming
that they are trying to save fuel wit this? The Mercedes SC230 had a roots blower also with an electric clutch a few years back. These clutches are much like the a/c clutches...and I am not sure how well they hold.

EDIT:

Found the picture of the s/c with the electric clutch:

http://www.carsteering.com/data/all_...B2-700-Map.jpg

cdoxp800 · 10-14-2012, 02:59 PM

Quote:

Originally Posted by Boosted Performance

As far as flow goes, that is as bad as it gets. The split after the supercharger outlet is horrible, and the driver side split is welded in the opposite direction of the flow. That is the angle (about 15*) you want if you want to draw slight vacuum.
hold.

I had the same thought on the intake pipe..

theaudir8fan · 10-14-2012, 04:20 PM

sorry but who ever came up with this must not have any experience with boosting cars, the design is completely flawed

sloboi · 10-15-2012, 12:53 AM

There MUST be something in there to divert flow to the driver side intake. Looks cool...if you don't know what you're looking at =D. Though, with the Swedes, I'm not surprised. Sven: "PRESS IT FOR GLORY!"

I kid. Your designs are usually quite practical as well as aesthetically pleasing.

Staples · 10-15-2012, 12:59 AM

Anytime you may not be getting similar airflow to both throttle-bodies (bends, uneven length piping), I'm out.

sloboi · 10-15-2012, 01:03 AM

Quote:

Originally Posted by Staples

Anytime you may not be getting similar airflow to both throttle-bodies (bends, uneven length piping), I'm out.

That would be my biggest worry. There is no way they can maintain equal pressure on both sides throughout the RPM range--efficiently--and an inefficient method would create heat.

Nixlimited · 10-15-2012, 12:11 PM

That design looks like garbage.

Jordo! · 10-15-2012, 02:48 PM

It's far from ideal, but the volume that has to fill and the distance to the TB is pretty modest, so notwithstanding flow interruption from the sharp bend, boost should be pretty equal -- if it had to travel through another round of piping and an intercooler it would be another story.

Anyway, design theory aside, have they tested it yet?

swiss370Z · 10-15-2012, 04:31 PM

Hey guys,

here is the dynosheet:

Auto Occasion, Autos kaufen und verkaufen: Automarkt von AutoScout24 - AutoScout24

big_Leistungsdiagramm%20370%20Z%20Kompressor.jpg

HP, WHP.....sorry i don't no.....

Greetings
Ivo

Jordo! · 10-15-2012, 05:22 PM

Quote:

Originally Posted by swiss370Z

Hey guys,

here is the dynosheet:

Auto Occasion, Autos kaufen und verkaufen: Automarkt von AutoScout24 - AutoScout24

Attachment 55995

HP, WHP.....sorry i don't no.....

Greetings
Ivo

Looks like bhp. A gain of 80 hp to the crank sounds about right for a non-intercooled set-up.

That's a pretty nice torque curve too.

sloboi · 10-16-2012, 03:05 AM

Quote:

Originally Posted by swiss370Z

Hey guys,

here is the dynosheet:

Auto Occasion, Autos kaufen und verkaufen: Automarkt von AutoScout24 - AutoScout24

Attachment 55995

HP, WHP.....sorry i don't no.....

Greetings
Ivo

Wait a minute. You're not a Swede. You're Swiss. Solid looking dyno. Expensive watches and large bank accounts vs. awesome looking cheap furniture.

swiss370Z · 10-16-2012, 01:06 PM

Quote:

Originally Posted by sloboi

Wait a minute. You're not a Swede. You're Swiss. Solid looking dyno. Expensive watches and large bank accounts vs. awesome looking cheap furniture.

I drive myself the STILLEN Supercharger

I unfortunately can not provide accurate information .....

This kit is officially for a week in Switzerland!

Hope that soon more information will be available ...?

Best regards from Switzerland
Ivo

Lug · 10-16-2012, 02:39 PM

Power and tq do not cross at 5252 rpm on that dyno sheet, meaning one of those numbers is bullshite (technically, scaled wrong).

10-14-2012, 01:13 PM	#1 (permalink)
swiss370Z Track Member Join Date: Jun 2011 Location: In the Mountains Posts: 649 Drives: VW UP! 1.0 Ltr Rep Power: 15	NOVIDEM Supercharger Nissan 370Z Hi togehter Today I was at the premiere of the new supercharger 370Z from NOVIDEM of Switzerland! Enclosed are the first photos! IMG_5233.jpg IMG_5234.jpg IMG_5235.jpg Mhhhhhh .... I see no intercooler and the kit looks set up? Its not the same as the 350Z from the VQ35HR....??? Enjoy... Greetings from switzerland Ivo __________________ /// ONE LAST RIDE /// R.I.P. FAIRLADY Z /// Last edited by swiss370Z; 10-14-2012 at 01:18 PM.

10-14-2012, 02:24 PM	#2 (permalink)
Jordo! A True Z Fanatic Join Date: May 2010 Location: nirvana Posts: 6,394 Drives: 2023 NATM Rep Power: 418	Hmm. If boost numbers are modest, non-intercooled could still work well on a budget. Looking forward to additional details and dynos -- the kit looks very clean, and the welds are nice. Wish someone would make a roots blower kit, tho' jay4500 likes this. __________________ Enjoy it. Destroy it.

10-14-2012, 04:20 PM	#5 (permalink)
theaudir8fan Base Member Join Date: Jul 2011 Location: lonely land up north Posts: 162 Drives: 07 Infiniti G35S PG Rep Power: 14	sorry but who ever came up with this must not have any experience with boosting cars, the design is completely flawed carlitos_370z likes this. __________________ 2007 Infiniti G35S 5AT PG; GTM; KW; Hotchkis; Stillen; Berks; SPC; GT-spec; SxExCx

10-15-2012, 12:59 AM	#7 (permalink)
Staples Track Member Join Date: Sep 2010 Location: Baltimore, MD Posts: 546 Drives: '08 Infiniti G37s Rep Power: 16	Anytime you may not be getting similar airflow to both throttle-bodies (bends, uneven length piping), I'm out. __________________ '08 Infiniti G37s - Forced Induction Fed

10-15-2012, 12:11 PM	#9 (permalink)
Nixlimited A True Z Fanatic Join Date: Aug 2009 Location: San Diego Posts: 1,235 Drives: 15 GT-R / 11 Prius Rep Power: 26	That design looks like garbage. O&G likes this. __________________ Car Sold! Pleasure being a part of the Z community. New ride: 2015 GT-R - 647 WHP / 641 WTQ (e85) & 543 WHP / 519 WTQ (91)

10-15-2012, 12:53 AM	#6 (permalink)
sloboi Base Member Join Date: Nov 2010 Location: Nowhere Posts: 127 Drives: Legs Rep Power: 15	There MUST be something in there to divert flow to the driver side intake. Looks cool...if you don't know what you're looking at =D. Though, with the Swedes, I'm not surprised. Sven: "PRESS IT FOR GLORY!" I kid. Your designs are usually quite practical as well as aesthetically pleasing.

10-15-2012, 02:48 PM	#10 (permalink)
Jordo! A True Z Fanatic Join Date: May 2010 Location: nirvana Posts: 6,394 Drives: 2023 NATM Rep Power: 418	It's far from ideal, but the volume that has to fill and the distance to the TB is pretty modest, so notwithstanding flow interruption from the sharp bend, boost should be pretty equal -- if it had to travel through another round of piping and an intercooler it would be another story. Anyway, design theory aside, have they tested it yet? __________________ Enjoy it. Destroy it.

10-15-2012, 04:31 PM	#11 (permalink)
swiss370Z Track Member Join Date: Jun 2011 Location: In the Mountains Posts: 649 Drives: VW UP! 1.0 Ltr Rep Power: 15	Hey guys, here is the dynosheet: Auto Occasion, Autos kaufen und verkaufen: Automarkt von AutoScout24 - AutoScout24 big_Leistungsdiagramm%20370%20Z%20Kompressor.jpg HP, WHP.....sorry i don't no..... Greetings Ivo __________________ /// ONE LAST RIDE /// R.I.P. FAIRLADY Z ///

10-16-2012, 02:39 PM	#15 (permalink)
Lug A True Z Fanatic Join Date: Dec 2008 Location: Texas Posts: 1,926 Drives: 2006 350Z Rep Power: 19	Power and tq do not cross at 5252 rpm on that dyno sheet, meaning one of those numbers is bullshite (technically, scaled wrong). __________________ keep Chubbs in your pocket - Chubbs

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Have you seen CIN Motorsports 370Z Supercharger kit	cdoxp800	Forced Induction	24	06-29-2014 11:19 PM
Stillen supercharger 370z	SRperformance	Drivetrain/Engine	21	10-01-2012 07:46 PM
Looking for any supercharger kit for 370z	poonwrecker	Wanted	2	09-18-2012 07:55 PM
Supercharger kit, JDM spec 370Z	Pabust	Forced Induction	34	10-20-2010 07:51 PM
STILLEN Introduces 515hp Supercharger System for Nissan 370Z / Infiniti G37	speed_BMW330i	Forced Induction	11	03-31-2010 10:58 AM