different noise from vortech help

Nissan370 · 09-23-2012, 11:22 AM

It's not the blower bearings it's the driveshaft pulley you can cover that pulley and hear the normal blower sound (the pulley that connects front to rear of the bracket it's sealed ) stillen said that hold bracket needs to be replaced if that pulley is bad

I drop the car off Wednesday to hills garage for a complete engine test and tune I will go from there not driving the car much just don't want that pulley to lock up on me it will pop the front and rear belt

Staples · 09-24-2012, 01:17 AM

Quote:

Originally Posted by Nissan370

It's not the blower bearings it's the driveshaft pulley you can cover that pulley and hear the normal blower sound (the pulley that connects front to rear of the bracket it's sealed ) stillen said that hold bracket needs to be replaced if that pulley is bad

I drop the car off Wednesday to hills garage for a complete engine test and tune I will go from there not driving the car much just don't want that pulley to lock up on me it will pop the front and rear belt

Frank and Suzanne will take care of ya... Hill's will get it to run the way it should.

Nut_N_Much · 01-24-2013, 07:16 PM

Stillen:
I called for a week to get the belt sizes got no call backs. I tried to order a part and Its been another week. I wish I new who the owner of that place was, his guys are running it into the ground!

I hope you get your parts.. Good luck

Quote:

Originally Posted by EVOHUNTER

I Was talking about stillen, not JE imports.
I havent dealt with those guys.
All i know is stillens customer support sucks,
and the guys know nothing..

Nissan370 · 01-25-2013, 11:12 PM

ya frank at hills garage fixed it he replaced the bearings in the pulley driveshaft he did not call stillen he just ordered the bearing and swapped them he said its a easy fix

Nut_N_Much · 01-26-2013, 07:23 PM

Congrats brother... Hope all is well

09-23-2012, 11:22 AM	#16 (permalink)
Nissan370 Enthusiast Member Join Date: Feb 2011 Location: Baltimore Posts: 431 Drives: 2009 ST BLK 370Z Rep Power: 14	It's not the blower bearings it's the driveshaft pulley you can cover that pulley and hear the normal blower sound (the pulley that connects front to rear of the bracket it's sealed ) stillen said that hold bracket needs to be replaced if that pulley is bad I drop the car off Wednesday to hills garage for a complete engine test and tune I will go from there not driving the car much just don't want that pulley to lock up on me it will pop the front and rear belt __________________ 370z vsr motorsports single turbo/built motor 9.1cr 525rwhp/450rwtq @ 10.5psi (stock maf maxed out)

01-25-2013, 11:12 PM	#19 (permalink)
Nissan370 Enthusiast Member Join Date: Feb 2011 Location: Baltimore Posts: 431 Drives: 2009 ST BLK 370Z Rep Power: 14	ya frank at hills garage fixed it he replaced the bearings in the pulley driveshaft he did not call stillen he just ordered the bearing and swapped them he said its a easy fix Staples and Nut_N_Much like this. __________________ 370z vsr motorsports single turbo/built motor 9.1cr 525rwhp/450rwtq @ 10.5psi (stock maf maxed out)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
turbo feeding a vortech	Nissan370	Forced Induction	6	09-04-2012 10:49 AM
Stillen vortech charger kit	EVOHUNTER	Forced Induction	40	07-12-2011 05:49 PM
Vortech 2.87 tuner kit w/extras!!!!!!!!!	Holliday	Parts for sale (Private Classifieds)	8	02-12-2011 11:28 AM
Vortech Supercharger Development	Minicobra1	Forced Induction	124	02-02-2010 04:59 AM
Vortech is looking.	Solus	Forced Induction	16	08-27-2009 04:04 PM

01-26-2013, 07:23 PM	#20 (permalink)
Nut_N_Much A True Z Fanatic Join Date: Dec 2011 Location: Pensacola Florida Posts: 1,696 Drives: Awesome Car Rep Power: 27	Congrats brother... Hope all is well