Real Auto Dynamics built and R/T tuned built motor TT

Mr.Squeeze · 11-07-2012, 06:00 PM

Quote:

Originally Posted by fuct

SICK MAN! how many pounds are you running on a day to day basis, ie. which one do you feel safest using?

Low Boost 14 PSI is more than enough in this cold North east weather right now.

elperuano · 11-07-2012, 07:15 PM

Congrats man, that exhaust really opened up the ponies! I hope to follow this path one day!

Nixlimited · 11-07-2012, 07:25 PM

Quote:

Originally Posted by Mr.Squeeze

Yes I have the HKS EVC S boost controller.

You have probably answered this already, but are you using custom gauges, and if so what kind? I have been looking at Defi Racer (because I think 52mm is what fits best) and the PLX gauges. Just noticed the newer PLX do not have the outer ring of LEDs, which is kind of a bummer.

Edit: sorry, just saw the gauges on the first page of the thread. Any advice on install in factory location?

Mr.Squeeze · 11-08-2012, 02:18 AM

Quote:

Originally Posted by Nixlimited

You have probably answered this already, but are you using custom gauges, and if so what kind? I have been looking at Defi Racer (because I think 52mm is what fits best) and the PLX gauges. Just noticed the newer PLX do not have the outer ring of LEDs, which is kind of a bummer.

Edit: sorry, just saw the gauges on the first page of the thread. Any advice on install in factory location?

I have a few pictures that I took during the process that I will put up once I make my thread in the members gallery. I will say this much you need a dremel to make the Def'si fit, I also used black black silicone for a tight fit.

Nixlimited · 11-08-2012, 10:05 AM

Quote:

Originally Posted by Mr.Squeeze

I have a few pictures that I took during the process that I will put up once I make my thread in the members gallery. I will say this much you need a dremel to make the Difi fit, I also used black black silicone for a tight fit.

Cool. Did you use the Defi Racer gauges?

Mr.Squeeze · 11-08-2012, 11:17 AM

Quote:

Originally Posted by Nixlimited

Cool. Did you use the Defi Racer gauges?

Yes I have the 52mm Racer gauges.

Nixlimited · 11-08-2012, 12:31 PM

Quote:

Originally Posted by Mr.Squeeze

Yes I have the 52mm Racer gauges.

Where did you tap oil temp and pressure? I am getting ready to do a radiator swap and to add an oil cooler and I am trying to plan out the system and connections. Do any sandwich plate adapters include ports for those?

Blaizon · 11-08-2012, 12:33 PM

Sick looking graphs Cliff! I can't imagine how the car feels now...once I get my twins I can't wait to run you to see how bad of a whoopin you put on me

elperuano · 11-08-2012, 01:30 PM

^lol his low boost setting is higher than my max but the numbers respond with what I'm runnin on 12 lbs (the only setting I use lol). Too bad ur not In south Florida I'd love to see this machine! How long was the downtime when u went with the built motor?

Mr.Squeeze · 11-08-2012, 08:49 PM

Quote:

Originally Posted by Blaizon

Sick looking graphs Cliff! I can't imagine how the car feels now...once I get my twins I can't wait to run you to see how bad of a whoopin you put on me

I cant wait for you to pull the trigger man and get the twins.

Quote:

Originally Posted by elperuano

^lol his low boost setting is higher than my max but the numbers respond with what I'm runnin on 12 lbs (the only setting I use lol). Too bad ur not In south Florida I'd love to see this machine! How long was the downtime when u went with the built motor?

The engine was built last year took 3-4 month's for it to get built, I had to wait for my custom piston's that took 8 weeks to come during that time also.

Mr.Squeeze · 02-10-2013, 06:56 PM

Quote:

Originally Posted by Nixlimited

Where did you tap oil temp and pressure? I am getting ready to do a radiator swap and to add an oil cooler and I am trying to plan out the system and connections. Do any sandwich plate adapters include ports for those?

Just Saw my fault for being month's late on the reply I used the stock location ran a T off of it .

Baer383 · 02-10-2013, 07:54 PM

Quote:

Originally Posted by Nixlimited

Where did you tap oil temp and pressure? I am getting ready to do a radiator swap and to add an oil cooler and I am trying to plan out the system and connections. Do any sandwich plate adapters include ports for those?

I used this very easy and a great solution.

Derale Performance Inline Fan Thermostats 35021 - SummitRacing.com

Nixlimited · 02-10-2013, 09:10 PM

Thank you both.

swiss370Z · 02-17-2013, 11:09 AM

Quote:

Originally Posted by Mr.Squeeze

Hey Mr.Squeeze

I can not get enough from this dyno pull!

Absolutely incredible
Looks and sounds as if the booth collapses from the performance!

Really Impressive!
Well done

Greetings from Switzerland

Mr.Squeeze · 02-20-2013, 05:18 PM

Quote:

Originally Posted by swiss370Z

Hey Mr.Squeeze

I can not get enough from this dyno pull!

Absolutely incredible
Looks and sounds as if the booth collapses from the performance!

Really Impressive!
Well done

Greetings from Switzerland

Thanks

11-08-2012, 12:33 PM	#68 (permalink)
Blaizon Base Member Join Date: Feb 2010 Location: North Jersey Posts: 17 Drives: E92 Rep Power: 15	Sick looking graphs Cliff! I can't imagine how the car feels now...once I get my twins I can't wait to run you to see how bad of a whoopin you put on me __________________ Single Turbo E92 07 Montego Blue 335i 6AT E90

02-10-2013, 09:10 PM	#73 (permalink)
Nixlimited A True Z Fanatic Join Date: Aug 2009 Location: San Diego Posts: 1,235 Drives: 15 GT-R / 11 Prius Rep Power: 26	Thank you both. __________________ Car Sold! Pleasure being a part of the Z community. New ride: 2015 GT-R - 647 WHP / 641 WTQ (e85) & 543 WHP / 519 WTQ (91)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
◙◙◙ AMSOIL Synthetic Motor Oil \| Real Auto Dynamics ◙◙◙	Kevin@RAD	Drivetrain/Engine	151	01-24-2014 03:26 PM
Liberty VIP at Real Auto Dynamics	Kevin@RAD	Nissan 370Z Photos / Spyshots / Video / Media Gallery	3	08-14-2012 01:03 PM
Anyone have a built motor yet for FI?	GambitX	Forced Induction	61	08-22-2011 10:44 AM
built motor?	toner123	Forced Induction	45	03-23-2011 06:53 PM
09 6 speed 370z Twin Turbo, Built motor. BIG PROB!!	soaka1	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	19	03-07-2011 05:34 PM

11-07-2012, 07:15 PM	#62 (permalink)
elperuano A True Z Fanatic Join Date: Oct 2011 Location: Southwest FL Posts: 1,374 Drives: G37S Rep Power: 29	Congrats man, that exhaust really opened up the ponies! I hope to follow this path one day!

11-08-2012, 01:30 PM	#69 (permalink)
elperuano A True Z Fanatic Join Date: Oct 2011 Location: Southwest FL Posts: 1,374 Drives: G37S Rep Power: 29	^lol his low boost setting is higher than my max but the numbers respond with what I'm runnin on 12 lbs (the only setting I use lol). Too bad ur not In south Florida I'd love to see this machine! How long was the downtime when u went with the built motor?