![]() |
Originally Posted by AMNVQ LOL not sure the guy above me is serious or not, But WHERE did or WHO told you, You had to over spin the Stillen Sc
|
|
LinkBack | Thread Tools | Display Modes |
![]() |
#6 (permalink) | ||||
NOT AN ACTIVE SPONSOR. DO NOT BUY
Join Date: Dec 2008
Location: CALIFORNIA
Posts: 913
Drives: 370Z
Rep Power: 18 ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]() Quote:
Here's an example: Your statement today: Quote:
Quote:
Here's your dyno graph before the tune and here's your dyno graph after the tune and this is from your own posting: ![]() ![]() Keep in mind that you are always on a load bearing dyno which can have too many variables and allows the operator to make the numbers higher or lower at a whim. You have lost your mind so much that you have stated that a Dynojet number is inflated numbers. Keep in mind that the Dynojet is the industry standard dyno since you can't mess with the numbers and the car will read the same Dynojet to Dynojet. They are 100% consistent every time. Quote:
The only failure I am aware of is the one in Saudi Arabia when it was 140 degree weather while he was racing an AMG C63 in the desert at over 180kph...before he had gone through the verification and data logging process or dyno testing to ensure the AFR was spot on. Besides, if you are planning on going 180kph in 50 degree celsius engine, a stock engine simply cannot take it. Furthermore, this guy is so dissatisfied with our kit that he is buying our GTM 4.2L Stroker Long Block, GTM Stage 4 Transmission, GTM Stage 3 Supercharger Upgrade, GTM Return Fuel System, and our GTM Direct Port Water/Methanol Injection system. In closing, I really don't enjoy doing this to you or anyone for that matter. You have called me for advice, I have tried to help you over the phone with some input even though you are not our customer. You just leave me with no choice. To the OP, I'm sorry to ruin your thread. There is some good information on here that will help you make a good decision. Here are some dyno graphs of both the Stillen Kit and our GTM Kit on the same car on the same dyno. What you will notice is that our kit is superior in all aspects straight out of the box. The dyno graphs below speak volumes. ![]() ![]() ![]() ![]() ![]() Sam |
||||
![]() |
![]() |
Bookmarks |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Recommended Motor Oil | vehl | Engine & Drivetrain | 27 | 11-09-2012 01:06 AM |
Recommended Rotors | Vertigo | Brakes & Suspension | 14 | 04-04-2012 10:56 AM |
Recommended Oil Cooler? | KB2 | Intake/Exhaust | 1 | 02-13-2012 07:13 PM |
recommended motor oil | MD-370z | Engine & Drivetrain | 7 | 07-07-2011 07:53 PM |
Quick video of my exhaust setup/supercharger revving | atomicgoofbal | Other Vehicles | 0 | 06-08-2011 03:18 AM |