My long overdue GTM/ Baker Tuning TT build

Chuck33079 · 08-09-2012, 05:39 PM

Well, I finally found some time to sit down and write up the whole process. Some background first- I started to look at new cars late last year, and wanted to sell both my tired daily driver (2003 IS300) and the garage toy ( well modded 2004 STi) in order to downsize to just one car. This meant I needed something comfortable with a lot of gadgets since it would be my daily driver, and it needed to be faster than the Subaru in order for me to feel like I upgraded. I was looking at used 996tts, a new CTS-V, an IS-F and a few others. The GTR was out of the running, since the cost of upkeep on that car is unreal. The local Porsche dealer didn’t want my business, as even the receptionist wouldn’t speak to me when I walked in. The Lexus dealer told me they had an IS-F, but they didn’t want to go get it from the garage a few blocks away. I was really close to the CTS-V coupe, but they just wouldn’t move on the price and there is no way I was spending 73k on a GM product. A GT500 and Z06 would have offered the performance I was after, but the interiors of both were not nice places to be and I couldn’t handle the “Vette Guy” stigma. BMW/Audi/Benz were out due to reliability issues. I flirted with the idea of a Viper, but it’s just not a realistic daily driver.

A good buddy of mine has a G37s coupe, and I liked the car, but it didn’t have near enough go. I decided to run up to Baker Nissan to talk to Paul and Jason about putting a turbo kit on a G37. While I was there, I took a 370 out for a test drive, and I realized I preferred the two-seater vs the 2+2. I reached out to Sam at GTM, who was great about talking me through my options as far as forced induction on the Z. Paul and Jason at Baker made me feel confident that I could use a boosted Z as a daily driver without issue. It didn’t hurt that I’ve always had a thing for Zs, especially the 240 and 300.

It took some time to find the right car, as apparently it was fairly challenging to find a 370 Touring with nav and the sport pack in a color I wanted and a manual transmission. I actually had parts for the car showing up before I owned it, since I couldn’t pass up some of the Black Friday deals. I ended up purchasing the car from Fusz Nissan out of St. Louis. They had the car tinted and a clear bra put on, and I flew up to grab it on a Friday morning. The drive back took care of most of the break-in period. I rolled back into my garage at about 4 am Saturday morning.

Parts began to be installed immediately. First was the Blendmount and Mirrortap power cord for my Escort 9500. A GTR start button and Nismo shift knob followed. The clutch helper spring got yanked out at this time as well. The car was stock for less than 24 hours of my ownership. About a week later, I got bored and installed the Hotchkis sway bars and Z Speed under panel as well as dying the interior stitching red. EVO-R CF door handle covers were installed because the stock silver handles look like *** on any color car but silver. LED interior lights, black chrome badges and a JDM rear fog light topped off this part of the build. Once the car was broken in, it was strapped to a dyno and produced 280whp/230trq (Dynojet). Here is where a normal person would have stopped. Unfortunately, we’re not normal people, we’re car guys.

By now the big ticket items started showing up. Sam came through with his stage 1 turbo kit, oil cooler, 3” downpipes with external wastegates plumbed back in, boost and AFR gauges, and a few other goodies. All hot side piping was ceramic coated, and all of the intercooler piping was powdercoated black. The intercooler got his thermal dispersant coating as well. A CSF radiator and condenser showed up around the same time. NST provided the Spec stage 3 clutch and lightened flywheel. Along the way I picked up Eibach springs, a heavy duty CSC, stainless brake lines, a TurboXS manual boost controller, Whiteline endlinks and a crap-ton of sound deadener. Tony at F.I. sent me one of their 3” TDX systems, with cats and the mufflers ceramic coated black to cut down on the bling factor.

I enlisted a buddy of mine to haul a truckload of parts up to Baker, and the car got dropped off. This was very strange for me, since I’ve always been a DIY guy. Paul tormented me (at my request) with the occasional shot of my car in pieces, with new parts being bolted on. It was like Christmas Eve, but it lasted for almost two weeks. It was the worst case of blue balls I’ve ever had. A few weeks later, I got the call to go pick it up. I didn’t get a chance to open the car up much on the way home due to traffic, but over the next few days I began to really appreciate the changes over stock. Obviously, there’s a ton more power. It’s still a little deceptive, as the butt-dyno seems to be completely disconnected to the speedometer. Punch the throttle, and you’re going much, much faster before you even really notice. You still don’t get the push in the back of a CTS-V or GT500, but the speedo needle is climbing like you wouldn’t believe.

Throttle response is great, and the stage 1 turbos spool up quickly. Boost threshold is low, and there’s only a touch of lag (and I’m blaming that on the DBW). Sam got me exactly what I was looking for- a responsive, smooth, quick-spooling set-up without the “floor gas, nothing, nothing, nothing, oh crap- tire spin, rev limiter, shift” feeling of a big turbo car. I was willing to sacrifice a little power up top for the responsiveness. Other than the power, and turbo-related noises, there’s not a huge change from a stock vehicle in terms of driveability. Credit on that has to go 50% to Sam for designing a great kit, and 50% to Jason for doing a terrific anal-retentive job putting it on. The 3” TDX exhaust sounds fantastic. It’s deep and menacing, but not overly loud or droning. It’s perfect- it’s only loud when you want it to be.

It took some getting used to the new clutch. It’s got the narrowest of engagement windows, and the light flywheel makes things trickier. It probably took me 500 miles before I stopped looking like a rookie, and I’ve been driving only manual transmission cars for 15+ years. Down the line, that adjustable pedal assembly will probably find its way into my car. For now, it’s almost an anti-theft device. Jason installed the springs while he had the car apart, and I’m perfectly content with both the drop and the ride quality. I’m sure I’ll eventually do something completely different for the suspension, but it’s fine for now since 90% of my driving is commuting around town.

I still have no idea how much power the car makes over stock, since I have no real desire to put the car on a dyno in August in Houston. It’s just too damn hot, even early in the morning. I’ll get the final numbers once it’s cooled off in a month or two. I’m just blown away by how much of a different car this is with the turbos installed. I’ve still got to put on the end links and brake lines, and I’m sure I’ll pick up camber arms for the front and rear soon. Eventually, I’ll get around to re-doing the audio in the car, but the Bose is just good enough for now and I have yet to install the sound deadening. Once I fry the rear tires, a set of 265f/295r Michelin PSS will be put on.

A few things that may help you if you decide to go this route:
Do your homework. Understand what you’re buying.
Buy the good parts. It’s cheaper to do it right the first time.
Add 15% to your budget for parts that you decide to put on “while you’re in there”.
Have enough money set aside for a motor. Things can happen. This is an expensive hobby.
It will take longer than you expect it to.
It will cost more than you expect it to.
Ask the people installing your kit what they recommend. Don’t just buy parts based on internet hearsay.
Call people. Don’t pm them, don’t email them or Facebook message them. Pick up the phone, call them and ask your question. You'll get an immediate answer.
Don’t be a guinea pig. Make sure the people you choose to work with have a proven track record with the platform. Pay more if you have too. It’s cheaper long term.

Special thanks to:
Paul and Jason at Baker Tuning
Sam at GTM
Tony at Fast Intentions
Z1, NST, Courtesy Nissan, The Z Store, Z Speed and Concept Z

P.S. Some constructive criticism for the vendors involved with this project- Very few of you saw fit to send me a sticker with my purchase. I’m a little disappointed. I’ve come to expect two whenever I buy a part- one from the part manufacturer, one from the vendor. They’re not for my car, they’re for someplace far more important- the beer fridge in my garage. There’s a large blank spot where your logo should be. NST and CSF were the only ones to include this very important component of the order. Z1 did not include a sticker, they went well above and beyond by sending a selection of large posters featuring scantily clad chicks posing on Zs. Bravo, gentlemen. Well done. For those of you not mentioned above, step it up.

P.P.S. Sam, I’ve got to commend you for hands-down the best instructions I’ve ever seen from anyone involved in aftermarket car parts. Wow. I didn’t install the kit myself, but the instructions made it seem like I could.

ZeeingAround · 08-09-2012, 06:14 PM

Please get some pictures posted up in your Album. Welcome to the forum.

Mr&Mrs · 08-09-2012, 06:29 PM

Nice write up, and welcome to the forum!

theDreamer · 08-09-2012, 07:04 PM

Welcome, great parts and build.

Nixlimited · 08-09-2012, 07:07 PM

Welcome to the forum. This particularly resonated: "It took some time to find the right car, as apparently it was fairly challenging to find a 370 Touring with nav and the sport pack in a color I wanted and a manual transmission." That's my car! When I started looking, I found one immediately in Houston at auction, but couldn't agree on price. Was like 2K off what I wanted. Over 6 months later I hadn't found another one so I ordered one. Then another 3 months later I finally got it, and because it was new, spent about 10K more than the first one would have cost. D'oh. Love the car though.

tibal · 08-09-2012, 07:18 PM

Thats an awesome write up and congrats!!

Chuck33079 · 08-09-2012, 07:19 PM

Got a few pics up. More may follow, but all of the exterior pics look just like a stock car.

Chuck33079 · 08-09-2012, 07:22 PM

Again, I can't say enough good things about the guys at Baker Tuning, GTM or F.I. They helped me out a whole lot since I wasn't all that familiar with the VQ platform.

Streetlife · 08-09-2012, 07:45 PM

Quote:

Originally Posted by Nixlimited

Welcome to the forum. This particularly resonated: "It took some time to find the right car, as apparently it was fairly challenging to find a 370 Touring with nav and the sport pack in a color I wanted and a manual transmission." That's my car! When I started looking, I found one immediately in Houston at auction, but couldn't agree on price. Was like 2K off what I wanted. Over 6 months later I hadn't found another one so I ordered one. Then another 3 months later I finally got it, and because it was new, spent about 10K more than the first one would have cost. D'oh. Love the car though.

That's what matters Nixlimited, that you're happy. I went through the same thing with Baker Nissan North. Paul and Jason know what their doing, Paul is the one who informed me about Tanabe (knew that Tanabe made top notch exhaust, advantex packing material, and their welding process is done by hand) had made an exhaust for the 370z, was set on Amuse at first. After waiting 5 months for my girl Vanity to be made, i had all of my Z1 silicone hoses the first week of delivery and exhaust, GT-R button too. Baker tuning is all i will let touch my girl (not looking to mod anymore, she's perfect).

DIGItonium · 08-09-2012, 11:58 PM

Congrats! Paul and Jason helped me with my car as well. I've put on almost 17k miles since and it is running great. I'm very eager to switch out more parts and eventually get it tuned again.

The Z is a great platform to work on, and it sounds so good!

Wattles · 08-10-2012, 12:55 AM

Very nice! Thank you

Mkai0 · 08-10-2012, 02:08 AM

Great write up. When I'm in the market for another car I'm gonna have to read this again for pointers.

SS_Firehawk · 08-10-2012, 02:52 AM

Damn, that's one hell of an opener to the Forums! Welcome, and awesome job.

ANMVQ · 08-10-2012, 08:20 AM

Super write up welcome, Nice job, Doing all you home work and doign exactly what you wanted to do. It's your car always rememebr,, I'm sure some people tried to sway you in another direction and you stayed your route, ( I knwo people told me to stay away from where I went- But wanted to be unique and the first, LOL)..

I know the feeling of seeing you can in peices and going weeks with out "HER" . Mines been at the dealer now 1 month and still 10 days or so to go and them I have to go to the dyno for a new tune.. Would love to see what you make WHP at the end of the month when it cools off, Again congrats and welcome.

theDreamer · 08-10-2012, 09:05 AM

Great pictures, looking through them I now remember your car being built at Baker.
The black kit with the black car looks great.

08-09-2012, 05:39 PM	#1 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	My long overdue GTM/ Baker Tuning TT build Well, I finally found some time to sit down and write up the whole process. Some background first- I started to look at new cars late last year, and wanted to sell both my tired daily driver (2003 IS300) and the garage toy ( well modded 2004 STi) in order to downsize to just one car. This meant I needed something comfortable with a lot of gadgets since it would be my daily driver, and it needed to be faster than the Subaru in order for me to feel like I upgraded. I was looking at used 996tts, a new CTS-V, an IS-F and a few others. The GTR was out of the running, since the cost of upkeep on that car is unreal. The local Porsche dealer didn’t want my business, as even the receptionist wouldn’t speak to me when I walked in. The Lexus dealer told me they had an IS-F, but they didn’t want to go get it from the garage a few blocks away. I was really close to the CTS-V coupe, but they just wouldn’t move on the price and there is no way I was spending 73k on a GM product. A GT500 and Z06 would have offered the performance I was after, but the interiors of both were not nice places to be and I couldn’t handle the “Vette Guy” stigma. BMW/Audi/Benz were out due to reliability issues. I flirted with the idea of a Viper, but it’s just not a realistic daily driver. A good buddy of mine has a G37s coupe, and I liked the car, but it didn’t have near enough go. I decided to run up to Baker Nissan to talk to Paul and Jason about putting a turbo kit on a G37. While I was there, I took a 370 out for a test drive, and I realized I preferred the two-seater vs the 2+2. I reached out to Sam at GTM, who was great about talking me through my options as far as forced induction on the Z. Paul and Jason at Baker made me feel confident that I could use a boosted Z as a daily driver without issue. It didn’t hurt that I’ve always had a thing for Zs, especially the 240 and 300. It took some time to find the right car, as apparently it was fairly challenging to find a 370 Touring with nav and the sport pack in a color I wanted and a manual transmission. I actually had parts for the car showing up before I owned it, since I couldn’t pass up some of the Black Friday deals. I ended up purchasing the car from Fusz Nissan out of St. Louis. They had the car tinted and a clear bra put on, and I flew up to grab it on a Friday morning. The drive back took care of most of the break-in period. I rolled back into my garage at about 4 am Saturday morning. Parts began to be installed immediately. First was the Blendmount and Mirrortap power cord for my Escort 9500. A GTR start button and Nismo shift knob followed. The clutch helper spring got yanked out at this time as well. The car was stock for less than 24 hours of my ownership. About a week later, I got bored and installed the Hotchkis sway bars and Z Speed under panel as well as dying the interior stitching red. EVO-R CF door handle covers were installed because the stock silver handles look like * on any color car but silver. LED interior lights, black chrome badges and a JDM rear fog light topped off this part of the build. Once the car was broken in, it was strapped to a dyno and produced 280whp/230trq (Dynojet). Here is where a normal person would have stopped. Unfortunately, we’re not normal people, we’re car guys. By now the big ticket items started showing up. Sam came through with his stage 1 turbo kit, oil cooler, 3” downpipes with external wastegates plumbed back in, boost and AFR gauges, and a few other goodies. All hot side piping was ceramic coated, and all of the intercooler piping was powdercoated black. The intercooler got his thermal dispersant coating as well. A CSF radiator and condenser showed up around the same time. NST provided the Spec stage 3 clutch and lightened flywheel. Along the way I picked up Eibach springs, a heavy duty CSC, stainless brake lines, a TurboXS manual boost controller, Whiteline endlinks and a crap-ton of sound deadener. Tony at F.I. sent me one of their 3” TDX systems, with cats and the mufflers ceramic coated black to cut down on the bling factor. I enlisted a buddy of mine to haul a truckload of parts up to Baker, and the car got dropped off. This was very strange for me, since I’ve always been a DIY guy. Paul tormented me (at my request) with the occasional shot of my car in pieces, with new parts being bolted on. It was like Christmas Eve, but it lasted for almost two weeks. It was the worst case of blue balls I’ve ever had. A few weeks later, I got the call to go pick it up. I didn’t get a chance to open the car up much on the way home due to traffic, but over the next few days I began to really appreciate the changes over stock. Obviously, there’s a ton more power. It’s still a little deceptive, as the butt-dyno seems to be completely disconnected to the speedometer. Punch the throttle, and you’re going much, much faster before you even really notice. You still don’t get the push in the back of a CTS-V or GT500, but the speedo needle is climbing like you wouldn’t believe. Throttle response is great, and the stage 1 turbos spool up quickly. Boost threshold is low, and there’s only a touch of lag (and I’m blaming that on the DBW). Sam got me exactly what I was looking for- a responsive, smooth, quick-spooling set-up without the “floor gas, nothing, nothing, nothing, oh crap- tire spin, rev limiter, shift” feeling of a big turbo car. I was willing to sacrifice a little power up top for the responsiveness. Other than the power, and turbo-related noises, there’s not a huge change from a stock vehicle in terms of driveability. Credit on that has to go 50% to Sam for designing a great kit, and 50% to Jason for doing a terrific anal-retentive job putting it on. The 3” TDX exhaust sounds fantastic. It’s deep and menacing, but not overly loud or droning. It’s perfect- it’s only loud when you want it to be. It took some getting used to the new clutch. It’s got the narrowest of engagement windows, and the light flywheel makes things trickier. It probably took me 500 miles before I stopped looking like a rookie, and I’ve been driving only manual transmission cars for 15+ years. Down the line, that adjustable pedal assembly will probably find its way into my car. For now, it’s almost an anti-theft device. Jason installed the springs while he had the car apart, and I’m perfectly content with both the drop and the ride quality. I’m sure I’ll eventually do something completely different for the suspension, but it’s fine for now since 90% of my driving is commuting around town. I still have no idea how much power the car makes over stock, since I have no real desire to put the car on a dyno in August in Houston. It’s just too damn hot, even early in the morning. I’ll get the final numbers once it’s cooled off in a month or two. I’m just blown away by how much of a different car this is with the turbos installed. I’ve still got to put on the end links and brake lines, and I’m sure I’ll pick up camber arms for the front and rear soon. Eventually, I’ll get around to re-doing the audio in the car, but the Bose is just good enough for now and I have yet to install the sound deadening. Once I fry the rear tires, a set of 265f/295r Michelin PSS will be put on. A few things that may help you if you decide to go this route:** Do your homework. Understand what you’re buying. Buy the good parts. It’s cheaper to do it right the first time. Add 15% to your budget for parts that you decide to put on “while you’re in there”. Have enough money set aside for a motor. Things can happen. This is an expensive hobby. It will take longer than you expect it to. It will cost more than you expect it to. Ask the people installing your kit what they recommend. Don’t just buy parts based on internet hearsay. Call people. Don’t pm them, don’t email them or Facebook message them. Pick up the phone, call them and ask your question. You'll get an immediate answer. Don’t be a guinea pig. Make sure the people you choose to work with have a proven track record with the platform. Pay more if you have too. It’s cheaper long term. Special thanks to: Paul and Jason at Baker Tuning Sam at GTM Tony at Fast Intentions Z1, NST, Courtesy Nissan, The Z Store, Z Speed and Concept Z P.S. Some constructive criticism for the vendors involved with this project- Very few of you saw fit to send me a sticker with my purchase. I’m a little disappointed. I’ve come to expect two whenever I buy a part- one from the part manufacturer, one from the vendor. They’re not for my car, they’re for someplace far more important- the beer fridge in my garage. There’s a large blank spot where your logo should be. NST and CSF were the only ones to include this very important component of the order. Z1 did not include a sticker, they went well above and beyond by sending a selection of large posters featuring scantily clad chicks posing on Zs. Bravo, gentlemen. Well done. For those of you not mentioned above, step it up. P.P.S. Sam, I’ve got to commend you for hands-down the best instructions I’ve ever seen from anyone involved in aftermarket car parts. Wow. I didn’t install the kit myself, but the instructions made it seem like I could.

08-09-2012, 06:14 PM	#2 (permalink)
ZeeingAround A True Z Fanatic Join Date: Dec 2010 Location: Michigan Posts: 6,365 Drives: 3500 NVP 370Z-sold! Rep Power: 86623	Please get some pictures posted up in your Album. Welcome to the forum. __________________ Get some roosters for eggs and Bulls for milk . Then you will see that gender matters. Especially at milking time.

08-09-2012, 06:29 PM	#3 (permalink)
Mr&Mrs A True Z Fanatic Join Date: May 2010 Location: Tampa Posts: 4,207 Drives: RZ34 Rep Power: 31940	Nice write up, and welcome to the forum! __________________ Project Z <--Click - Check out the link too many mods to list!

08-09-2012, 07:04 PM	#4 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4210	Welcome, great parts and build. __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

08-09-2012, 07:07 PM	#5 (permalink)
Nixlimited A True Z Fanatic Join Date: Aug 2009 Location: San Diego Posts: 1,235 Drives: 15 GT-R / 11 Prius Rep Power: 26	Welcome to the forum. This particularly resonated: "It took some time to find the right car, as apparently it was fairly challenging to find a 370 Touring with nav and the sport pack in a color I wanted and a manual transmission." That's my car! When I started looking, I found one immediately in Houston at auction, but couldn't agree on price. Was like 2K off what I wanted. Over 6 months later I hadn't found another one so I ordered one. Then another 3 months later I finally got it, and because it was new, spent about 10K more than the first one would have cost. D'oh. Love the car though. __________________ Car Sold! Pleasure being a part of the Z community. New ride: 2015 GT-R - 647 WHP / 641 WTQ (e85) & 543 WHP / 519 WTQ (91)

08-09-2012, 07:18 PM	#6 (permalink)
tibal Track Member Join Date: Dec 2008 Location: Safest Town In America Posts: 987 Drives: TT-370Z and 2.5RS Rep Power: 17	Thats an awesome write up and congrats!! __________________ 2010 - PG - M6 - 370zTT 453/409 6lbs IG @TRbal10 TEAM FLY1 MOTORSPORTS

08-09-2012, 07:19 PM	#7 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	Got a few pics up. More may follow, but all of the exterior pics look just like a stock car.

08-09-2012, 07:22 PM	#8 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	Again, I can't say enough good things about the guys at Baker Tuning, GTM or F.I. They helped me out a whole lot since I wasn't all that familiar with the VQ platform.

08-09-2012, 11:58 PM	#10 (permalink)
DIGItonium A True Z Fanatic Join Date: Jan 2009 Location: Kansas Posts: 3,800 Drives: 09 Z34-TT 6MT Rep Power: 42	Congrats! Paul and Jason helped me with my car as well. I've put on almost 17k miles since and it is running great. I'm very eager to switch out more parts and eventually get it tuned again. The Z is a great platform to work on, and it sounds so good! __________________

08-10-2012, 12:55 AM	#11 (permalink)
Wattles Base Member Join Date: Jul 2012 Location: California Posts: 57 Drives: 2012 G37 IPL 7AT TT Rep Power: 13	Very nice! Thank you __________________ 2012 G37 IPL 7AT \| GTM Stage 1 Long Block \| GTM Stage 1 Garett TT \| Blitz SBC typeR Boost Controller \| GTM Stage 4 Transmission \| Tial BOV \| Fast Intentions exhaust \| GTM 8qt Oil Pan \| 583whp/484trq @ 13psi

08-10-2012, 02:08 AM	#12 (permalink)
Mkai0 Base Member Join Date: Dec 2010 Location: Somewhere in Texas Posts: 209 Drives: 2008 G35 Sedan Rep Power: 14	Great write up. When I'm in the market for another car I'm gonna have to read this again for pointers. __________________ Eibach, Tanabe, Blitz, Vertini, GTM stage 1.5 SC, Aquamist, Invidia, Alto built 5AT, Edge Racing, Racelogic, GTM driveshaft, 440 whp in 101F TX heat..

08-10-2012, 02:52 AM	#13 (permalink)
SS_Firehawk Premium Member Join Date: Oct 2011 Location: Tampa Posts: 4,142 Drives: 13' Magma Red Nismo Rep Power: 7335	Damn, that's one hell of an opener to the Forums! Welcome, and awesome job. __________________ Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI New Car: Under Construction

08-10-2012, 08:20 AM	#14 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 19	Super write up welcome, Nice job, Doing all you home work and doign exactly what you wanted to do. It's your car always rememebr,, I'm sure some people tried to sway you in another direction and you stayed your route, ( I knwo people told me to stay away from where I went- But wanted to be unique and the first, LOL).. I know the feeling of seeing you can in peices and going weeks with out "HER" . Mines been at the dealer now 1 month and still 10 days or so to go and them I have to go to the dyno for a new tune.. Would love to see what you make WHP at the end of the month when it cools off, Again congrats and welcome. __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

08-10-2012, 09:05 AM	#15 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4210	Great pictures, looking through them I now remember your car being built at Baker. The black kit with the black car looks great. __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Spec Jay's BPv2 Street/Track Build	Spec Jay	Member's 370Z Gallery	184	09-03-2021 10:58 PM
98intrigue's long overdue journal	98intrigue	Member's 370Z Gallery	426	10-18-2015 01:19 AM
[WTB] Baker tuning feedback	dirTy_shoeZ	Parts for sale (Private Classifieds)	1	07-16-2012 11:32 PM
*****Baker Tuning (May Day Garage)	JB-370z	Texas	0	07-13-2010 03:18 PM
[Hou] All Nissan Meet Host by ZCoH & Baker Nissan/Baker Tuning	Robert_K	Texas	36	07-12-2010 07:56 AM