Stillen SC Build 500 WHP?

ANMVQ · 08-07-2012, 10:53 AM

Ok so thought I would start a new thread, Because not broke down any more but turned into a bulid thread, So here goes, I am trying to see if I can see close to 500WHP with the Stillen SC . Mod list is below. Thanx for all the help in the broke down thread,

Super Charger Upgrade SCI to SI

34 Tooth Count Jackshaft Pulley

30 Tooth/35mm Supercharger Pulley

Gates belt Part numbe 560 8M GT20 for the cog pulleys

idler assembly from a 03-05 350z bracket

Bosh EV14 Injectors 850CC

UPREV MAF's

NGK plugs DILKAR8A8

WAT001026 Frozen boost.com Heat exchanger

Upgraded Intel pipe 2.75 made by ???

Turbosmart TS-0203-1022 Kompact 25 mm Dual Port Universal Fit Blow Off Valve

Staples · 08-07-2012, 11:39 AM

If you can manage to make close to 500, let alone on an all wheel drive X... I'll be extremely impressed.

Good luck OP!

ANMVQ · 08-07-2012, 11:47 AM

Hey Staples , Remember tho the X is RWD , Till they slip, The 412 I made on the stock kit was in line with the RWD guys. If GTM can do it why can't I with Stillen LOL..

Nixlimited · 08-07-2012, 01:59 PM

So are you going to try to go to blow-through with the new piping?

falconfixer · 08-07-2012, 02:01 PM

Godd luck with the build! Will be watching for updates

ANMVQ · 08-07-2012, 02:18 PM

Quote:

Originally Posted by Nixlimited

So are you going to try to go to blow-through with the new piping?

No was thinking about it but would have to put the stock manufold back on, I think or some of us think with the air intake made larger and upgraded MAF's should be enough. We'll see tho, Beening blow through or not , May not matter.

Rusty · 08-07-2012, 02:28 PM

Good luck with your build.

I'll be watching this with interest.

jwfisher · 08-07-2012, 04:55 PM

Great news - we'll all be watching!
What's the new idler assembler for?

Greedy · 08-07-2012, 06:44 PM

Quote:

Originally Posted by ANMVQ

No was thinking about it but would have to put the stock manufold back on, I think or some of us think with the air intake made larger and upgraded MAF's should be enough. We'll see tho, Beening blow through or not , May not matter.

If you decide to go back to the stock manifold and need the upper pipes that attach to the TB's, let me know. I have an extra set from my GTM TT install with brand new sychronic BOV's and the MAF housings. Good luck - hope your new set-up works well...

ZKraken22 · 08-07-2012, 07:53 PM

you know im in for updates anmvq

Z-Girl 12 · 08-07-2012, 08:06 PM

Sub'd...so been dreaming about purchasing an SC next summer...

ANMVQ · 08-07-2012, 09:32 PM

Quote:

Originally Posted by jwfisher

Great news - we'll all be watching!
What's the new idler assembler for?

Hey man where you been hidding, LOL The idle pulley is for the cog pulley set up because I need to used a different belt. Should be done in 2 weeks

ZKraken22 OH I know you ARE !!

ANMVQ · 08-07-2012, 09:33 PM

Quote:

Originally Posted by Greedy

If you decide to go back to the stock manifold and need the upper pipes that attach to the TB's, let me know. I have an extra set from my GTM TT install with brand new sychronic BOV's and the MAF housings. Good luck - hope your new set-up works well...

Thanx man we'll see

tomnavone · 08-07-2012, 11:38 PM

Epic........

CB1 · 08-08-2012, 12:30 AM

Subscribed. Wanna see what you get from this setup!

08-07-2012, 10:53 AM	#1 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 19	Stillen SC Build 500 WHP? Ok so thought I would start a new thread, Because not broke down any more but turned into a bulid thread, So here goes, I am trying to see if I can see close to 500WHP with the Stillen SC . Mod list is below. Thanx for all the help in the broke down thread, Super Charger Upgrade SCI to SI 34 Tooth Count Jackshaft Pulley 30 Tooth/35mm Supercharger Pulley Gates belt Part numbe 560 8M GT20 for the cog pulleys idler assembly from a 03-05 350z bracket Bosh EV14 Injectors 850CC UPREV MAF's NGK plugs DILKAR8A8 WAT001026 Frozen boost.com Heat exchanger Upgraded Intel pipe 2.75 made by ??? Turbosmart TS-0203-1022 Kompact 25 mm Dual Port Universal Fit Blow Off Valve __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda, Last edited by ANMVQ; 08-10-2012 at 09:28 AM.

08-07-2012, 11:39 AM	#2 (permalink)
Staples Track Member Join Date: Sep 2010 Location: Baltimore, MD Posts: 546 Drives: '08 Infiniti G37s Rep Power: 16	If you can manage to make close to 500, let alone on an all wheel drive X... I'll be extremely impressed. Good luck OP! __________________ '08 Infiniti G37s - Forced Induction Fed

08-07-2012, 11:47 AM	#3 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 19	Hey Staples , Remember tho the X is RWD , Till they slip, The 412 I made on the stock kit was in line with the RWD guys. If GTM can do it why can't I with Stillen LOL.. __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

08-07-2012, 01:59 PM	#4 (permalink)
Nixlimited A True Z Fanatic Join Date: Aug 2009 Location: San Diego Posts: 1,235 Drives: 15 GT-R / 11 Prius Rep Power: 26	So are you going to try to go to blow-through with the new piping? __________________ Car Sold! Pleasure being a part of the Z community. New ride: 2015 GT-R - 647 WHP / 641 WTQ (e85) & 543 WHP / 519 WTQ (91)

08-07-2012, 02:28 PM	#7 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,185 Drives: 2011 Nismo GM 6M Rep Power: 2684437	Good luck with your build. I'll be watching this with interest. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

08-07-2012, 02:01 PM	#5 (permalink)
falconfixer Track Member Join Date: Feb 2012 Location: 10aC Posts: 978 Drives: Taco Rep Power: 76	Godd luck with the build! Will be watching for updates

08-07-2012, 04:55 PM	#8 (permalink)
jwfisher Base Member Join Date: Jul 2009 Location: Texas Posts: 15 Drives: 2009 G37S Stillen SC Rep Power: 16	Great news - we'll all be watching! What's the new idler assembler for? __________________ 2009 G37S, Stillen SC, Stillen oil and tranny coolers, Stillen swaybars, SPC adjustable suspension, ARK exhaust. www.DrivingEnthusiast.net (personal website, blogs, RSS feeds)

08-07-2012, 07:53 PM	#10 (permalink)
ZKraken22 A True Z Fanatic Join Date: Jun 2011 Location: Houston Posts: 1,115 Drives: 10 Nissan 370Z 7AT Rep Power: 16	you know im in for updates anmvq __________________ Litespeed Racing Titanium Cold Air intake// GT Haus Axle// GarageLine combo// Nismo sway bars// Nismo Spoiler // Berk TP's

08-07-2012, 08:06 PM	#11 (permalink)
Z-Girl 12 A True Z Fanatic Join Date: Apr 2012 Location: Florida Posts: 4,105 Drives: Spirited Rep Power: 11716	Sub'd...so been dreaming about purchasing an SC next summer... __________________ 2012 Z-SOLD 2014 Nismo #565 Fast Intentions CBE/HFC/Swift/SPC/RJM/H&R-15/20mm/Z1 CAI/Headers/Intake Manifold w/Uprev Tune 328.31whp/263.64tq

08-07-2012, 11:38 PM	#14 (permalink)
tomnavone Track Member Join Date: Apr 2009 Location: S.F. Bay Area Posts: 723 Drives: Supercharged 370z Rep Power: 17	Epic........ __________________ GTM Supercharger/HKS Camp2/Berk cbe/Motordyne art pipes/Hotchkis sways/ Eibach Springs/ Black Volk TE37/Bridgestone S-04 Powered by

08-08-2012, 12:30 AM	#15 (permalink)
CB1 Base Member Join Date: Jun 2011 Location: Washington Posts: 188 Drives: 2011 Touring/Sport Rep Power: 30	Subscribed. Wanna see what you get from this setup! __________________ 2011 Metallic Black, Touring/Sport, Nav, AT \| F.I. Twin Turbo #060 \| E85 \| F.I. Built 7AT \| F.I. Flex Plate \| F.I. 34 Row Oil Cooler \| F.I. 19 Row 7AT Cooler \| ECUTEK Tuned By Sebastian \| 647 WHP 605 TQ \|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Whitemtl370's Stillen SC Build Thread	Whitemtl370	Member's 370Z Gallery	5	05-07-2012 09:59 AM
stillen superchge build results	Nissan370	Forced Induction	68	02-13-2012 05:23 PM
[WTB] wtb nismo seats stillen g3 cai stillen headers and stillen exhaust	bloodvayne	Parts for sale (Private Classifieds)	1	12-18-2011 10:25 PM
Datsun Roadster 1600...To build or not to build	motoextreme	The Lounge (Off Topic)	66	02-13-2010 01:40 AM
The EXPENSIVE 370Z Build - Brembo, HRE, JIC, Stillen	vividracing	Member's 370Z Gallery	10	06-03-2009 01:37 AM