AHHAHA go play the lottery. Just make sure you cut me in the WINNINGS :tiphat:

Just got back from my first dyno run on my new Ford Focus ST. I removed the top off the air intake box....GOT 501 WHP! WOOOHOOOOOO!

i assume you're joking because those only make 252HP crank. Unless you've modified it?

Top off the air intake box.....plus I added some performance stickers and some carbon fiber overlays! :totallyseriousSmilie:

hey, did u get a tune after you had pulleys added and the extra boost?
this would cause crazy lean conditions.

Car would go lean on the dyno,. Trying to tune it, I was told he would make as rich as he could and as soon as it went into boost , would go crazy lean., I still really have no driven the car, Only time I was in is was from the last dealer home, I hit no boost and drove no more than 55 all the way home 25 mins or so. No matter what he does with the tune it just goes lean. At idle the car is super rich, It will throw a rich code, At WOT and boosting, it goes the other way 24/1 lean :icon14:

Quick update the Wally in the car was a GSS317 and the feed line was either the wrong kind of hose or installed wrong as it split at the hose clap and was bleeding pressure out. They are installing a DW300 and a new fuel line, We'll see, CROSSED FINGERSS big time,

So the lean issue is all set, But now will not make more than 3PSI at WOT, I'm going back to the stillen set upi amd messing with the cogs when I have the time, Just one issue after another, FN car

dude stop playing around and get this beast running remember we got a race to 500rwhp going on lol

LOL Going to Jimmy at The Shop CT, Auto transport is picking the car up tomorrow I hope, Will be at Jimmys on Thursday, Not even looking for the 500WHP any more , LOL can it just run

please don't quite man.. you're almost there!

I know, Just getting frustrated, Heard some promising things on the phone from Jimmy @ the Shop, I was just telling him what the car was doing and the mods I have, We'll see,

question for u what part of the 350z vortech idler assembly do i need
i got the cog pulleys and the gates belt but not sure on what parts of the idler assembly i need thxs

I thing its on one of my post here. I don't have the paper anymore. ;( long bad story . but car is running made 10 PSI Stillen puppies. cogs are off and Stillen. BPV. Dyno is in the am.

Dafug did you just say? STILLEN puppies or STILLEN pulleys? It's a huge difference lol.