7 speed automatic rebuild

KaienZ34 · 08-06-2012, 09:56 AM

Z1

CB1 · 08-06-2012, 10:09 AM

Quote:

Originally Posted by KaienZ34

Z1

Agreed, Z1. Setrab cores and the rest of the kits are top notch.
Here is a DIY on the 25 row cooler. Z1 Motorsports 25 row oil cooler install

ANMVQ · 08-06-2012, 10:14 AM

Quote:

Originally Posted by show2nite

Thank you ANMVQ I see You know my Homie Squeeze!

I am going to be purchasing the GTM KIT 1.5 SC

soon. I already possess a 28,000 BTU (Largest Tranny Cooler Size from my old setup). I have to order a good oil cooler though is their another reputable good brand besides Stillen?

Hey man, YEA I do , He's been a HUGE help

..

Tranny cooler , Yea Z1 and This looks really good?

Mishimoto Oil Cooler Kit Infiniti G37 MMOC-370Z-09

Baer383 · 08-06-2012, 10:56 AM

Quote:

Originally Posted by show2nite

Thank you ANMVQ I see You know my Homie Squeeze!

I am going to be purchasing the GTM KIT 1.5 SC

soon. I already possess a 28,000 BTU (Largest Tranny Cooler Size from my old setup). I have to order a good oil cooler though is their another reputable good brand besides Stillen?

Z1 for the oil cooler

show2nite · 08-06-2012, 11:54 AM

Yall Fellas Rock!! thank you all for chiming in with tips & insights. Much Appreciated.

ANMVQ · 08-06-2012, 12:20 PM

No problem, man, Funny I spend more time over here then on the G37 forum, I get more info and feed back here. LOL

show2nite · 08-06-2012, 12:32 PM

What you guy's think about this AT Transmission B&M 70297 Hi-Tek Transmission Cooling System: Amazon.com: B&M 70297 Hi-Tek Transmission Cooling System: Automotive

I am being extra cautious.

ANMVQ · 08-06-2012, 12:35 PM

I thought about the one with a fan or adding a fan, But unless you going to wire its own on off switch( I was going to tie into the cooling fans). Then no, in the winter when its like 15 DEG out you will not want the fans extra cooling,

show2nite · 08-06-2012, 12:36 PM

Quote:

Originally Posted by ANMVQ

No problem, man, Funny I spend more time over here then on the G37 forum, I get more info and feed back here. LOL

I agree!

WILD370Z · 08-06-2012, 10:30 PM

Quote:

Originally Posted by ZKraken22

Any idea to when youll have the car back? gtm is gonna take forever. In for results. And also I see you have the pulley upgrade on your stillen SC. How much did you gain?

the car didnt actually make more peak power because i changed the headers as well but my mid range power was great

made just with the standard kit and cat back exaust 410 rwhp

but since then have done a few up grades just ordered the 2.80 pulley from vortech so will let you know how i go

WILD370Z · 08-06-2012, 10:33 PM

Quote:

Originally Posted by ANMVQ

just saw the same rhing about the pulley upgrade Iam doing the same, But think the T trim from vortech + I upgraded fuel,maf's and the heat exchanger, cog pulleys what'd you make for whp?

i havent up graded the mafs as yet they have not maxed out yet i will put on the 2.80 pulley and see how it goes my car made about 408 rwhp with the cat back system and the stock pulley

i would love to see how your heat exchanger works out im very interested

WILD370Z · 08-06-2012, 10:38 PM

Quote:

Originally Posted by red6spd

Two years old and the tranny is going?

2 years of abuse will do that

WILD370Z · 08-06-2012, 10:45 PM

Quote:

Originally Posted by Baer383

1.yes I have a tuning cable and log it and adjust it.

2.see 1.

3.I live in Georgia where it's hot even in winter.

that was the problem i had they alot of people said if i did not floor it as much in 5-6-7th gear that was the nail in the coffin i also didnt know how to increase the line pressure with my up rev tune

ANMVQ · 08-07-2012, 08:52 AM

Quote:

Originally Posted by WILD370Z

i havent up graded the mafs as yet they have not maxed out yet i will put on the 2.80 pulley and see how it goes my car made about 408 rwhp with the cat back system and the stock pulley

i would love to see how your heat exchanger works out im very interested

Yea you will max them out tho with the pulley upgrade, There is a guy here (In New York) who max'd his out, He also has been helping me a lot. I would up doing the pullies, and upgraded the SC from the SCI to SI. So I'm going to see around 12-13 PSI,Upgraded my plugs and injectors also. The heat exchanged is huge 27x6x3.5 will sit in the front , Basically a front-mount

408rwho is right on the money too I made 412 WHP. with the 8PSI pulley, Al tho I see 9

.

ANMVQ · 08-07-2012, 08:53 AM

Quote:

Originally Posted by WILD370Z

that was the problem i had they alot of people said if i did not floor it as much in 5-6-7th gear that was the nail in the coffin i also didnt know how to increase the line pressure with my up rev tune

Now we know why? So to hear that man, Your turner should have done that for you, I can even imagin how you drove the car with out the line pressue adjusted.
Is the dealer covering you Tranny? Or did I miss something. BTW your car look SUPER NICE

08-06-2012, 09:56 AM	#31 (permalink)
KaienZ34 A True Z Fanatic Join Date: Oct 2009 Location: LA. not L.a. Posts: 21,652 Drives: Z34 Tour/Sport Rep Power: 178	Z1 __________________ *"These Violent Delights Have Violent Ends"* http://www.the370z.com/members/kaienz34-albums-z34.html

08-06-2012, 12:20 PM	#36 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 19	No problem, man, Funny I spend more time over here then on the G37 forum, I get more info and feed back here. LOL __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

08-06-2012, 12:35 PM	#38 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 19	I thought about the one with a fan or adding a fan, But unless you going to wire its own on off switch( I was going to tie into the cooling fans). Then no, in the winter when its like 15 DEG out you will not want the fans extra cooling, __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
7 speed automatic tiptronic downshift	dudesky	Engine & Drivetrain	38	05-31-2011 02:10 AM
6 Speed Manual or 7 Speed Automatic?	ichris14	Nissan 370Z General Discussions	19	01-04-2011 06:07 AM
if you rebuild it, um.. they will come.	Danny3.7	The Lounge (Off Topic)	23	11-02-2010 01:19 AM
an automatic OR 7 speed paddle shifter transmission!	kevindangit	Nissan 370Z Photos / Spyshots / Video / Media Gallery	19	05-19-2009 12:27 PM
7 speed automatic owners	dad	Nissan 370Z General Discussions	25	02-10-2009 12:53 PM

08-06-2012, 11:54 AM	#35 (permalink)
show2nite Banned Join Date: Dec 2010 Location: New York Posts: 63 Drives: Infiniti Rep Power: 0	Yall Fellas Rock!! thank you all for chiming in with tips & insights. Much Appreciated.

08-06-2012, 12:32 PM	#37 (permalink)
show2nite Banned Join Date: Dec 2010 Location: New York Posts: 63 Drives: Infiniti Rep Power: 0	What you guy's think about this AT Transmission B&M 70297 Hi-Tek Transmission Cooling System: Amazon.com: B&M 70297 Hi-Tek Transmission Cooling System: Automotive I am being extra cautious.