Engine Build

GaleForce · 04-07-2013, 08:10 PM

Quote:

Originally Posted by esfourteen

nope I only had a walbro 255 hardwired, the aeromotive might be enough depending on HP goals

Oh, I saw the 340 at the start of your thread and assumed that's what you started with.

Quote:

Originally Posted by Ron

I think the issue is the 650cc injectors. Not the pump or the lack of a return system. I am on the same 650cc injectors and they were close to maxing out at 530ish rwhp. Wonder what the result would be with the 255lph and say 850cc injectors.

Hmm, knowing that, I'll definitely wait and see. I'm using 750cc injectors with the 340lph fuel pump. I'll be getting tuned soon and will post up the info in a separate thread.

SS_Firehawk · 04-07-2013, 08:17 PM

I don't know why I'm not subbed yet. I click here every damn day lol.

Boosted Performance · 04-07-2013, 08:25 PM

The 255lph fuel pumps have a limit of abot 500-550whp (on the VQ35/37 engines), depending on the dyno. I don't know why any forced induction kit would use those pumps these days when the 340lph fuel pumps are available everywhere. IMO it is a bad way to keep the kit cost down.

esfourteen · 04-07-2013, 08:40 PM

Quote:

Originally Posted by Boosted Performance

The 255lph fuel pumps have a limit of abot 500-550whp (on the VQ35/37 engines), depending on the dyno. I don't know why any forced induction kit would use those pumps these days when the 340lph fuel pumps are available everywhere. IMO it is a bad way to keep the kit cost down.

agreed, I wish I had known about the aeromotive stealth pump last year when I originally installed the kit. an added benefit of this pump is in its name, its so quiet!

98intrigue · 04-07-2013, 09:18 PM

Damn, Nick! Those are some killer numbers at 12psi. What are you looking to run once you get retuned? I hope you say 15-16psi...would love to see what those turbos can do.

Isamu · 04-07-2013, 09:32 PM

Quote:

Originally Posted by esfourteen

I'm running bosch EV-14 650cc injectors right now, but I have a set of DW 850cc going in soon.

those are the same injectors I am running

esfourteen · 04-07-2013, 09:38 PM

Quote:

Originally Posted by 98intrigue

Damn, Nick! Those are some killer numbers at 12psi. What are you looking to run once you get retuned? I hope you say 15-16psi...would love to see what those turbos can do.

as much as I can on 93, from what I've seen with a VHR at 10:1 thats about 16-17psi

Isamu · 04-07-2013, 09:46 PM

Quote:

Originally Posted by esfourteen

as much as I can on 93, from what I've seen with a VHR at 10:1 thats about 16-17psi

roplusbee · 04-07-2013, 11:05 PM

Only 650cc injectors? I have the ID1000s, Aeromotive FP, and a return system. All I need now is forged internals, a little intake tweaking, and more boost. I really need to get my pennies together now, so I can join the built boosted club, lol.

Sent from my D-Team-MT4GS-CM10.1

esfourteen · 04-07-2013, 11:40 PM

Quote:

Originally Posted by roplusbee

Only 650cc injectors? I have the ID1000s, Aeromotive FP, and a return system. All I need now is forged internals, a little intake tweaking, and more boost. I really need to get my pennies together now, so I can join the built boosted club, lol.

Sent from my D-Team-MT4GS-CM10.1

I put 650's in when I installed the kit last year, 850's are going in soon

Mr.Squeeze · 04-09-2013, 10:12 AM

Quote:

Originally Posted by esfourteen

as much as I can on 93, from what I've seen with a VHR at 10:1 thats about 16-17psi

Now we are talking

Ron · 10-25-2013, 09:35 PM

Hey Nick, on this google doc you created:

https://docs.google.com/spreadsheet/...DMWtBT0E#gid=0

Are all those parts included on the OEM gasket kit that you can get for about $200ish? I know the oil pump and timing components are not, but how about what above them on the list?

How's the car doing?!

esfourteen · 10-25-2013, 11:04 PM

Quote:

Originally Posted by Ron

Hey Nick, on this google doc you created:

https://docs.google.com/spreadsheet/...DMWtBT0E#gid=0

Are all those parts included on the OEM gasket kit that you can get for about $200ish? I know the oil pump and timing components are not, but how about what above them on the list?

How's the car doing?!

it might be, but at the time when I ordered it courtesy couldn't find the "gasket set", if you can get it that should cover you.

my Z is back in the shop unfortunately, looks like I lifted the head last week probably from overheating. my car has been plagued with overheating issues all summer since I turned up the boost. I switched to a mishimoto radiator and added a 2012+ expansion tank which helped a bit, but doing 2-3 back to back pulls the car would overheat, even in cool temperatures.

I suspect that the turbos are boiling coolant creating air pockets in the cooling system due to how GTM routed the turbo lines: coolant output of passenger is coolant input of driver, so driver side turbo is being cooled with very hot coolant.

Ron · 10-25-2013, 11:17 PM

oh man, that sucks, I hope you can get it figured out. Are you going to tun independent cooling lines for each turbo?

esfourteen · 10-25-2013, 11:30 PM

Quote:

Originally Posted by Ron

oh man, that sucks, I hope you can get it figured out. Are you going to tun independent cooling lines for each turbo?

yep, thats the plan

04-07-2013, 08:17 PM	#77 (permalink)
SS_Firehawk Premium Member Join Date: Oct 2011 Location: Tampa Posts: 4,142 Drives: 13' Magma Red Nismo Rep Power: 7335	I don't know why I'm not subbed yet. I click here every damn day lol. esfourteen and GaleForce like this. __________________ Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI New Car: Under Construction

04-07-2013, 08:25 PM	#78 (permalink)
Boosted Performance The370Z.com Sponsor Join Date: Feb 2010 Location: Edmonton, AB Posts: 1,629 Drives: Z's Rep Power: 3382	The 255lph fuel pumps have a limit of abot 500-550whp (on the VQ35/37 engines), depending on the dyno. I don't know why any forced induction kit would use those pumps these days when the 340lph fuel pumps are available everywhere. IMO it is a bad way to keep the kit cost down. LMBmikeZ and MyKindaGuise like this. __________________ 750WHP starting @ $7,500 to the door FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html FB: https://www.facebook.com/Boosted-Per...6303179791462/ IG @boostedperformanceyeg Last edited by Boosted Performance; 04-07-2013 at 08:30 PM.

04-07-2013, 09:18 PM	#80 (permalink)
98intrigue A True Z Fanatic Join Date: Jul 2010 Location: Clearwater, FL Age: 39 Posts: 4,855 Drives: 2014 Viper Rep Power: 430	Damn, Nick! Those are some killer numbers at 12psi. What are you looking to run once you get retuned? I hope you say 15-16psi...would love to see what those turbos can do. esfourteen likes this. __________________ Ryan - 2014 Stryker Green Viper Gone - a few Vipers and a couple turbo VQs

04-07-2013, 11:05 PM	#84 (permalink)
roplusbee A True Z Fanatic Join Date: Dec 2009 Location: Killeen, TX Posts: 2,360 Drives: 2007 350Z NISMO Rep Power: 22	Only 650cc injectors? I have the ID1000s, Aeromotive FP, and a return system. All I need now is forged internals, a little intake tweaking, and more boost. I really need to get my pennies together now, so I can join the built boosted club, lol. Sent from my D-Team-MT4GS-CM10.1 Mkai0 and GaleForce like this. __________________ 2007 350Z NISMO #0618: Zerolift \| UPREV \| F.I. \| Greddy \| Competition Clutch \| Injector Dynamics \| Aeromotive \| Pioneer \| JL

10-25-2013, 09:35 PM	#87 (permalink)
Ron A True Z Fanatic Join Date: Oct 2010 Location: Houston, TX Posts: 3,009 Drives: TT '11 PW Nismo #113 Rep Power: 22	Hey Nick, on this google doc you created: https://docs.google.com/spreadsheet/...DMWtBT0E#gid=0 Are all those parts included on the OEM gasket kit that you can get for about $200ish? I know the oil pump and timing components are not, but how about what above them on the list? How's the car doing?! __________________ 2011 Twin Turbo PW nismo #113 - My Journal - My TT Build Thread [ GTM GTX Stg2 TT \|\| HKS EVC6 \|\| Custom CarPC \|\| F.I 3'' TDX CBE \|\| SB 6puck clutch/ZSpeed CSC \|\| BC BR Coilovers \|\| SPC camber arms \|\| Work VSS-X \|\| Custom Headlights \|\| PW:JDM CF Covers \|\| Seibon CF Engine Cover ]

10-25-2013, 11:17 PM	#89 (permalink)
Ron A True Z Fanatic Join Date: Oct 2010 Location: Houston, TX Posts: 3,009 Drives: TT '11 PW Nismo #113 Rep Power: 22	oh man, that sucks, I hope you can get it figured out. Are you going to tun independent cooling lines for each turbo? __________________ 2011 Twin Turbo PW nismo #113 - My Journal - My TT Build Thread [ GTM GTX Stg2 TT \|\| HKS EVC6 \|\| Custom CarPC \|\| F.I 3'' TDX CBE \|\| SB 6puck clutch/ZSpeed CSC \|\| BC BR Coilovers \|\| SPC camber arms \|\| Work VSS-X \|\| Custom Headlights \|\| PW:JDM CF Covers \|\| Seibon CF Engine Cover ]

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GTM Performance Engineering: VQ37VHR Engine Build 700HP Power Package	SAM@GTM	Forced Induction	73	10-12-2012 10:46 AM
engine build time	Nissan370	Forced Induction	42	08-05-2012 10:48 AM
370Z For Sale WTB: wrecked 370z with working engine... or engine	travisjb	370Z For Sale	0	01-15-2012 12:47 PM
Pic request: 370z engine bay w/stillen g3's and Seibon engine cover.	atx370z	Nissan 370Z Photos / Spyshots / Video / Media Gallery	20	01-05-2011 01:50 PM
Datsun Roadster 1600...To build or not to build	motoextreme	The Lounge (Off Topic)	66	02-13-2010 01:40 AM