Akuma : Gauging Interest..FI

AkumaMS · 06-26-2012, 12:10 AM

We are on the verge of releasing a few items into the community, and I am very stoked to move on to Forced Induction.

We are looking for up to 3 cars.(2 to start) Minimal 2 MT ans 1 AT, we want to keep the kits as universal as possible. If you are thinking about pulling the trigger, give us a shout. It will be a great opportunity for everyone.

Think power under the curve, with the ability to destroy at the track and on the street. That is where Akuma lives, and you are invited.

Shoot me a line here or via email and we can see if we can get the ball rolling asap!

Cheers!

John
john@akumamotorsports.com

Nixlimited · 06-26-2012, 02:08 AM

Would be helpful to say where you are located...

blackonorange · 06-26-2012, 02:13 AM

Ny/nj

sfearl1 · 06-26-2012, 02:24 AM

Damn, wish you guys were closer!

ZtoG37 · 06-26-2012, 03:57 AM

I would be interested in this , i need more details and i have a 2008 g37s 6mt coupe, from Long Island

falconfixer · 06-26-2012, 07:27 AM

John, pm sent.

roplusbee · 06-26-2012, 07:31 AM

I would have been all over this a year ago. I will definitely be watching though. Good luck!

Sent from my myTouch_4G_Slide using Tapatalk 2

jofro6 · 06-26-2012, 01:23 PM

PM me details on what you have planned... I am located on Long Island with a 2012 6Spd, just under 2000 miles on the car, everything still stock. Willing to possibly lend my car as a donor vehicle.

...PM sent

ANMVQ · 06-26-2012, 02:13 PM

John You have a email.

AkumaMS · 06-26-2012, 07:18 PM

First off we are located in Woodbridge, NJ. So we are looking for someone in the NY,NJ and PA area that are able to leave a car with us for a while. We are looking at either a TT or a STS depending on fitment location and piping and overall clearance of parts. Our 2 priorities in mind are Drivability and Reliability as well as what is best for the 370z chassis. We are looking to use a TD05 housing, 68mm Billet Compressor with 68mm HTA extended blade wheel which will have a flow rate of 45lbs This will allow a great setup for instant spool and boost around 2000-2500rpm range for this car and the goals we have in mind. Basically it will respond like a factory turbo to keep that drivability but have a mean bite on the track. The numbers we are shooting for are about 100-150whp over stock. We want to have a kit that will function with stock engine reliably. Overall we want to make this setup so you can have fun driving to the track....Beat on it all day.... and then pick up your groceries on the way home to make it on time for dinner.....

-John will follow up with more information and we will both happily answer any other questions you have

-Kevin@AkumaMS

Valentino · 06-27-2012, 09:46 PM

Nice. more options

2011 Nismo#91 · 07-05-2012, 02:16 PM

PM me some time I might be interested.

TrinityRacer · 07-05-2012, 09:10 PM

This is exactly the kind of TT kit I would be interested in and have been waiting for. If I could ask for one thing...please retain the front crash bar. Thanks and look forward to the outcome!

tommyguns · 07-06-2012, 12:19 PM

I would be very interested in being a donor. Could you please pm me the time frame we're looking at.
Best regards,
Tom

AkumaMS · 07-06-2012, 12:44 PM

As far as information on the build refer to post #10, the downtime would be around a month or 2 right now being we are busy with alot of projects already

06-26-2012, 12:10 AM	#1 (permalink)
AkumaMS Base Member Join Date: Apr 2012 Location: NY/NJ Posts: 99 Drives: EVOX Rep Power: 13	Akuma : Gauging Interest..FI We are on the verge of releasing a few items into the community, and I am very stoked to move on to Forced Induction. We are looking for up to 3 cars.(2 to start) Minimal 2 MT ans 1 AT, we want to keep the kits as universal as possible. If you are thinking about pulling the trigger, give us a shout. It will be a great opportunity for everyone. Think power under the curve, with the ability to destroy at the track and on the street. That is where Akuma lives, and you are invited. Shoot me a line here or via email and we can see if we can get the ball rolling asap! Cheers! John john@akumamotorsports.com __________________ John Shafer Owner/Calibrator Akuma Motorsports LLC http://t1.gstatic.com/images?q=tbn:A...ncVpndgs-nSyng

06-26-2012, 02:08 AM	#2 (permalink)
Nixlimited A True Z Fanatic Join Date: Aug 2009 Location: San Diego Posts: 1,235 Drives: 15 GT-R / 11 Prius Rep Power: 26	Would be helpful to say where you are located... __________________ Car Sold! Pleasure being a part of the Z community. New ride: 2015 GT-R - 647 WHP / 641 WTQ (e85) & 543 WHP / 519 WTQ (91)

06-26-2012, 02:24 AM	#4 (permalink)
sfearl1 A True Z Fanatic Join Date: Oct 2011 Location: St. Louis Posts: 2,300 Drives: 2013 FBO E85 GTR Rep Power: 18	Damn, wish you guys were closer! __________________ Scott

06-26-2012, 07:31 AM	#7 (permalink)
roplusbee A True Z Fanatic Join Date: Dec 2009 Location: Killeen, TX Posts: 2,360 Drives: 2007 350Z NISMO Rep Power: 23	I would have been all over this a year ago. I will definitely be watching though. Good luck! Sent from my myTouch_4G_Slide using Tapatalk 2 __________________ 2007 350Z NISMO #0618: Zerolift \| UPREV \| F.I. \| Greddy \| Competition Clutch \| Injector Dynamics \| Aeromotive \| Pioneer \| JL

06-26-2012, 01:23 PM	#8 (permalink)
jofro6 Track Member Join Date: Mar 2012 Location: Long Island, NY Posts: 603 Drives: 2012 370Z Touring Rep Power: 14	PM me details on what you have planned... I am located on Long Island with a 2012 6Spd, just under 2000 miles on the car, everything still stock. Willing to possibly lend my car as a donor vehicle. ...PM sent __________________ 2012 Red 6Spd Touring/Nav.. FI CF NonRes CBE and Res TP #682 Fly1 RS1 CF Fenders Last edited by jofro6; 06-26-2012 at 06:08 PM.

06-26-2012, 02:13 AM	#3 (permalink)
blackonorange A True Z Fanatic Join Date: Jul 2011 Location: Saskatchewan Posts: 1,078 Drives: 09 370z Rep Power: 16	Ny/nj

06-26-2012, 03:57 AM	#5 (permalink)
ZtoG37 Base Member Join Date: Jan 2012 Location: East End Posts: 247 Drives: 2008 Infiniti G37S Rep Power: 13	I would be interested in this , i need more details and i have a 2008 g37s 6mt coupe, from Long Island

06-26-2012, 07:27 AM	#6 (permalink)
falconfixer Track Member Join Date: Feb 2012 Location: 10aC Posts: 978 Drives: Taco Rep Power: 76	John, pm sent.

06-26-2012, 02:13 PM	#9 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 19	John You have a email. __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

06-26-2012, 07:18 PM	#10 (permalink)
AkumaMS Base Member Join Date: Apr 2012 Location: NY/NJ Posts: 99 Drives: EVOX Rep Power: 13	First off we are located in Woodbridge, NJ. So we are looking for someone in the NY,NJ and PA area that are able to leave a car with us for a while. We are looking at either a TT or a STS depending on fitment location and piping and overall clearance of parts. Our 2 priorities in mind are Drivability and Reliability as well as what is best for the 370z chassis. We are looking to use a TD05 housing, 68mm Billet Compressor with 68mm HTA extended blade wheel which will have a flow rate of 45lbs This will allow a great setup for instant spool and boost around 2000-2500rpm range for this car and the goals we have in mind. Basically it will respond like a factory turbo to keep that drivability but have a mean bite on the track. The numbers we are shooting for are about 100-150whp over stock. We want to have a kit that will function with stock engine reliably. Overall we want to make this setup so you can have fun driving to the track....Beat on it all day.... and then pick up your groceries on the way home to make it on time for dinner..... -John will follow up with more information and we will both happily answer any other questions you have -Kevin@AkumaMS __________________ John Shafer Owner/Calibrator Akuma Motorsports LLC http://t1.gstatic.com/images?q=tbn:A...ncVpndgs-nSyng

06-27-2012, 09:46 PM	#11 (permalink)
Valentino Enthusiast Member Join Date: Jan 2009 Location: RaceTrack Posts: 349 Drives: SOLD 09,370z,M6 Rep Power: 305	Nice. more options __________________ Lou Fusz Nissan \| KW V3 \| SPL rear camber and toe bolt \| OS Giken LSD \| Nismo Diff cover \| Engine Oil cooler \| F.I. TDX Cat Back 18" Resonators \| F.I. Resonated Test Pipes \| Injen cold air intake \| COBB AccessPORT \| JWT Clutch Flywheel \|

07-05-2012, 02:16 PM	#12 (permalink)
2011 Nismo#91 A True Z Fanatic Join Date: Mar 2011 Location: NJ Posts: 2,402 Drives: slowly Rep Power: 40569	PM me some time I might be interested.

07-05-2012, 09:10 PM	#13 (permalink)
TrinityRacer Base Member Join Date: Apr 2011 Location: NJ Posts: 34 Drives: 2011 MB Nismo 370Z Rep Power: 14	This is exactly the kind of TT kit I would be interested in and have been waiting for. If I could ask for one thing...please retain the front crash bar. Thanks and look forward to the outcome!

07-06-2012, 12:19 PM	#14 (permalink)
tommyguns Track Member Join Date: May 2009 Location: New York Age: 65 Posts: 914 Drives: 370Z/Sport/Black/MT Rep Power: 17	I would be very interested in being a donor. Could you please pm me the time frame we're looking at. Best regards, Tom __________________ 09 Sport / MB / 6sd / Nismo"R" Intake / Eibach Pro Kit / Z1 25 row cooler / JWT LW FW / New Short Block 3/11/11 /H&R 15fr 20rr/DBA 4000/FI CB with 12"res./Morel/JL/"Division"mod/SPC/EcuTek/M370/ZEX C SHOT/ART's/NRG

07-06-2012, 12:44 PM	#15 (permalink)
AkumaMS Base Member Join Date: Apr 2012 Location: NY/NJ Posts: 99 Drives: EVOX Rep Power: 13	As far as information on the build refer to post #10, the downtime would be around a month or 2 right now being we are busy with alot of projects already __________________ John Shafer Owner/Calibrator Akuma Motorsports LLC http://t1.gstatic.com/images?q=tbn:A...ncVpndgs-nSyng

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Gauging interest in a harness bar	Scott @ RA	Exterior & Interior	54	08-04-2014 08:54 AM
Gauging Interest - 93 VR-4	kielbasa16	Other Vehicle For sale	6	10-18-2010 03:53 PM
Gauging interest on an 07 STI in WA	get Z'd	Other Vehicle For sale	5	04-16-2010 12:00 AM
Gauging interest on new hood	Kyle@STILLEN	Exterior & Interior	16	03-09-2010 12:03 AM