Zex kit install 100 shot

V8Killer · 04-17-2012, 02:05 PM

Quote:

Originally Posted by BAHUMAT2JZ

Did you install a wideband? Try it with the 75 shot first. You can set your window switch to activate at like 5000- 5500rpm to check if everything is working right.

We are good to go tried it on 100 and she ripped. One of the wires needed to be reconnected, when we crimped the wire from the zex box it slid down away from the other wire. Still on track for the tune tomorrow.

NeverBoneStck · 04-17-2012, 02:23 PM

Quote:

Originally Posted by V8Killer

To all the guys spraying, we are tryin to see if the window switch is working, would it be okay to do 100 shot one time to see if everything is working?

A hundred shot will be fine .. There are guys running this all day long with No tune or colder plugs and etc....

fuct · 04-17-2012, 02:45 PM

Quote:

Originally Posted by V8Killer

We are good to go tried it on 100 and she ripped. One of the wires needed to be reconnected, when we crimped the wire from the zex box it slid down away from the other wire. Still on track for the tune tomorrow.

shouldn't you be soldiering these connections? Id figure being as safe as possible and minimizing the little risks would be a number one priority on any N2O setup.....

but then again i also thought the piece of wood used to mount the tank in the previous pics was ghetto...

V8Killer · 04-17-2012, 03:00 PM

Quote:

Originally Posted by fuct

shouldn't you be soldiering these connections? Id figure being as safe as possible and minimizing the little risks would be a number one priority on any N2O setup.....

but then again i also thought the piece of wood used to mount the tank in the previous pics was ghetto...

We have a rubber sleeve over it, the actual connector it's not sitting there with electrical tape.

V8Killer · 04-17-2012, 03:02 PM

Quote:

Originally Posted by NeverBoneStck

A hundred shot will be fine .. There are guys running this all day long with No tune or colder plugs and etc....

Hey man I haven't seen an update from your thread how is your build going.

BAHUMAT2JZ · 04-17-2012, 03:24 PM

I must agree the car feels so good with 100 shot

.

valpozguy · 04-18-2012, 09:45 AM

I'm really anxious to see the #'s on this. My z will be done in a couple of weeks and will be getting a UpRev tune as soon as its finished. I will be running a Autometer Ultra-Lite Series Full Sweep Electric Gauges

100 shot with window switch. Looks great BTW!

Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

V8Killer · 04-18-2012, 11:50 AM

Quote:

Originally Posted by valpozguy

I'm really anxious to see the #'s on this. My z will be done in a couple of weeks and will be getting a UpRev tune as soon as its finished. I will be running a Autometer Ultra-Lite Series Full Sweep Electric Gauges

100 shot with window switch. Looks great BTW!

Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

At the shop now stock tune numbers are 292whp 231 tq on a mustang dyno

chrischhorn · 04-18-2012, 12:01 PM

Any other mods done so far?

V8Killer · 04-18-2012, 12:10 PM

What mods? Full bolt on's.

V8Killer · 04-18-2012, 05:01 PM

Anybody with the zex kit hit me up we are having issues

corbin09 · 04-18-2012, 05:09 PM

What issue are you running into?

V8Killer · 04-18-2012, 05:14 PM

The kit just all of a sudden stopped spraying.

V8Killer · 04-18-2012, 05:41 PM

Bad box fml

corbin09 · 04-18-2012, 06:05 PM

Are they going to send you a new one? Do you have a picture of what is not working? I was going to offer solenoid or bottle pressure. Sounds like you have it under control though.

04-18-2012, 12:10 PM	#70 (permalink)
V8Killer A True Z Fanatic Join Date: Feb 2011 Location: Newport, NC Posts: 1,127 Drives: It Hard Till It Pops Rep Power: 16	What mods? Full bolt on's. __________________ "Punch" Too much to list and a baby shot of nitrous....

04-18-2012, 05:01 PM	#71 (permalink)
V8Killer A True Z Fanatic Join Date: Feb 2011 Location: Newport, NC Posts: 1,127 Drives: It Hard Till It Pops Rep Power: 16	Anybody with the zex kit hit me up we are having issues __________________ "Punch" Too much to list and a baby shot of nitrous....

04-18-2012, 05:14 PM	#73 (permalink)
V8Killer A True Z Fanatic Join Date: Feb 2011 Location: Newport, NC Posts: 1,127 Drives: It Hard Till It Pops Rep Power: 16	The kit just all of a sudden stopped spraying. __________________ "Punch" Too much to list and a baby shot of nitrous....

04-18-2012, 05:41 PM	#74 (permalink)
V8Killer A True Z Fanatic Join Date: Feb 2011 Location: Newport, NC Posts: 1,127 Drives: It Hard Till It Pops Rep Power: 16	Bad box fml __________________ "Punch" Too much to list and a baby shot of nitrous....

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Single shot for the weekend	DJackie	Photography	5	01-29-2012 08:28 AM
Is this tire shot?	370ZBG	Wheels & Tires	20	04-13-2011 07:43 PM
SHOT in the DARK	ZYUL8R	Wanted	3	10-20-2010 06:07 PM
The single Z shot	theDreamer	Nissan 370Z Photos / Spyshots / Video / Media Gallery	88	01-30-2010 03:12 AM
probably a shot in the dark...	Richie	Nissan 370Z General Discussions	0	11-25-2009 12:15 PM

04-17-2012, 03:24 PM	#66 (permalink)
BAHUMAT2JZ Base Member Join Date: Dec 2009 Location: AL Posts: 78 Drives: MB blue 370Z Rep Power: 16	I must agree the car feels so good with 100 shot .

04-18-2012, 09:45 AM	#67 (permalink)
valpozguy Track Member Join Date: Feb 2012 Location: valparaiso Posts: 501 Drives: 09 z Rep Power: 16	I'm really anxious to see the #'s on this. My z will be done in a couple of weeks and will be getting a UpRev tune as soon as its finished. I will be running a Autometer Ultra-Lite Series Full Sweep Electric Gauges 100 shot with window switch. Looks great BTW! Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

04-18-2012, 12:01 PM	#69 (permalink)
chrischhorn A True Z Fanatic Join Date: Jan 2012 Location: Mililani, HI Posts: 1,566 Drives: 2014 Juke Nismo RS Rep Power: 16	Any other mods done so far?

04-18-2012, 05:09 PM	#72 (permalink)
corbin09 Track Member Join Date: Jun 2009 Location: Dallas tx Posts: 665 Drives: 370z Rep Power: 280	What issue are you running into?

04-18-2012, 06:05 PM	#75 (permalink)
corbin09 Track Member Join Date: Jun 2009 Location: Dallas tx Posts: 665 Drives: 370z Rep Power: 280	Are they going to send you a new one? Do you have a picture of what is not working? I was going to offer solenoid or bottle pressure. Sounds like you have it under control though.