Nissan 370Z Forum - Zex kit install 100 shot

Nissan 370Z Forum (http://www.the370z.com/)

- Forced Induction (http://www.the370z.com/forced-induction/)

- - Zex kit install 100 shot (http://www.the370z.com/forced-induction/52951-zex-kit-install-100-shot.html)

Sorry I meant afr. Those ngk comes pre gap at .032. Just drop them in and go

Quote:

Originally Posted by BAHUMAT2JZ (Post 1665783)

Sorry I meant afr. Those ngk comes pre gap at .032. Just drop them in and go

Roger that! Calling the shop to change appt. to Wednesday. Then let the games begin.

I had a couple questions... Was just wondering about how many sprays would you get out of a full bottle and how much does it cost to get it refilled? Would it have been possible to take the spare tire out and mount it somehow in its spot? That way you could hide the bottle.

Looks good, but I would seriously consider a tune specifically for when you spray.

Yes, colder plugs are a good idea, but keep in mind just how lean it will run when spraying... i would consider adding Osiris so at the push of a button (the cruise control, actually) you know for certain you are running correct timing and adding enough fuel when spraying.

Nice. In for results. Now u def need the radials I sold you.

Quote:

Originally Posted by MnTBlitz (Post 1667382)

Well it depends if the people who fill it up do it right. For a 10lb bottle it will be at least 10 passes. Yes you could remove the spare and sub if you have it and place it there I chose not to. In my area it's about 30-40 bucks depending where you go.

Quote:

Originally Posted by Jordo! (Post 1667411)

A tune is what I will be doing on Wednesday and I will be doing 2 maps one on the bottle and one N/A.

Quote:

Originally Posted by chuckd05 (Post 1667544)

Nice. In for results. Now u def need the radials I sold you.

Your right! 11s here I come!:eekdance:

What are you hoping to run low mid or high 11's

High 11s at best mid

Thats still good if you don't mind what do I think the total cost will be

Quote:

Originally Posted by new370 (Post 1667652)

Thats still good if you don't mind what do I think the total cost will be

Total cost of what? I listed all the parts and cost on my first post

Quote:

Originally Posted by fuct (Post 1656752)

the screw you and your "body" used are for building metal clad buildings. kinda odd choice, but ehhhh.

best of luck

I forgot to mention that screw your referring to came with the kit.

Quote:

Originally Posted by NeverBoneStck (Post 1659615)

That's is classic .. I love the look of people's faces that drop tens of thousands of dollars on builds just to get their a$$ handed to them by someone on N20 . You should educate as many people as possible in regards to N20 ..

Hey how is your build going?

To all the guys spraying, we are tryin to see if the window switch is working, would it be okay to do 100 shot one time to see if everything is working?

You are better off waiting. If you do it now and and run super lean............BOOM! Very bad detonation and could lead to cylinder damage, piston damage, valve damage and head damage.........I blew a whole straight through the piston on my old integra cause hit fuel cut and detonated :-(

Did you install a wideband? Try it with the 75 shot first. You can set your window switch to activate at like 5000- 5500rpm to check if everything is working right.