04-11-2012, 01:32 PM
|
#11 (permalink)
|
|
A True Z Fanatic
Join Date: Mar 2010
Location: LI, NY
Posts: 1,375
Drives: 40th TT
Rep Power: 19
|
Quote:
Originally Posted by Dembflyr
Bringing back memories! I just wish I had done the ceramic coating now. It seems like everyone is doing it.
|
Yeah this is something I knew I would be doing right off the bat, I didn't do it on my last build and I regretted it.
Quote:
Originally Posted by swiss370Z
Sorry for my bad English!
I'm from Switzerland .....
But I love those photo strips ...
BIG compliment 
Best regards from Switzerland, and good luck
Ivo |
Thanks! 
Quote:
Originally Posted by Speedy
Very nice. Good pics and I dig the ceramic coating. Good idea there.
One thing I will mention. Watch those clamps on the fuel pump connections for the rubber hose. Those are just worm clamps and not EFI fuel hose clamps. I had something similar in my Challenger for a while and the clamps ended up cutting the hose as it softened from the fuel. Proper EFI fuel hose clamps have a rounded edge and no worm gear slots in them.
|
Yes this is a very good point, theres one spot on the pump install kit where I don't think you can use the EFI clamp, inside the bracket that holds the pump in, but it would be ideal to use these wherever possible. I try not to over tighten worm clamps to begin with as they do have that tendency to dig. If I ever had to go back in there I'd swap them out, but after spilling fuel all over my car I hope to never have to 
|
|
|
Similar Threads
Threaded Mode
