Boosted Performance single turbo build

Boosted Performance

I know another one of my customers with a 350z had some issues with the AEM EBC. He opted for the smaller turbine to aid with spool, and the EBC just did not work all that well all the time.

Then next round of kits will come with the slightly larger turbine (1.15 a/r vs 1.0 a/r), so that will help a bit with boost. These engines rev so high, and the extra exhaust flow in the last 1000rpm can really push the exhaust back pressure up there.

For every 10psi of boost, the exhaust pressure before the turbine should not exceed 20psi (2:1 ratio). In other words, if the turbine is on the small side, the wastegate can see up to 20psi of pressure on the valve just from the exhaust. The 1.0 a/r turbine housing can clearly get to 550whp (and that is a lot for a stock block), the 1.15 a/r housing can do it just a bit more efficiently.

__________________
750WHP starting @ $7,500 to the door
FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html
FB: https://www.facebook.com/Boosted-Per...6303179791462/
IG @boostedperformanceyeg

JMac88

The AEM uses an older style solenoid (single) that connot keep up with boost changes as well as the newer ones on the market. This is why it did nothing for the drop off in boost. A lot of the better ones will use a dual solenoid. The AEM has no adjustment for rpm. Hks is not the only one with rpm adjustability, just the one I chose.

Sebz might have said it was ok because it was on my car when he tuned it. With that being said it did nothing to help with the drop in boost, so not sure why he recommended it. Perhaps because you already bought it.

Edit* The AEM is fine if your just trying to control boost level. Ie if your trying to go from 8 psi to 10.

Here is the AEM solenoid

https://www.google.ca/search?hl=en&s...d38kqf6xVSM%3A

Here is the hks one
https://www.google.ca/search?hl=en&s...y33v2ucAszM%3A

Hope that helps. If you have any other questions, feel free to pm me.

Sent from my SGH-T889V using Tapatalk 2

__________________
*Full Mod List*

blackonorange

Woah woah woah you completely misunderstood me!! I was just explaining how I even found you on Facebook! Lolol I am saying that it's crazy how much more efficient your kit is than the STS haha sorry if offended you! And like I said earlier I would be rocking your kit if I wasn't so slammed. The only companies I'm even interested in buyin from is you and GTM and I'm going GTM only cause of the above reason! I never told any other companies I was buying their kit that I can remember haha. Again sorry for offending you !!

Boosted Performance

Well, sorry I did read it the wrong way then...It has been a long weekend and I am a bit edgy.

__________________
750WHP starting @ $7,500 to the door
FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html
FB: https://www.facebook.com/Boosted-Per...6303179791462/
IG @boostedperformanceyeg

blackonorange

Haha no worries man. It just really put your kit into perspective for me ( even though I've seen it in person). No stress

NitrousZ34

Gotcha! Ok what do you mean by adjustment for rpm? Like you can change psi according to whatever rpm your at or at whatever rpm you desire?

JMac88

Lets say I have to run 10% on the ebc to hit 10psi. My boost starts going down around 6500 rpm, so at 6500 I can increase to 15%, and at 6700 to 20% ect... to make my boost hold as close tp 10 psi as possible through the rpm band.


Sent from my SGH-T889V using Tapatalk 2

__________________
*Full Mod List*

NitrousZ34

Ok so thats why your saying the AEM BC wont hold boost, or didnt hold boost, because you physically can't adjust it for the rpms to compensate for the loss of boost. Makes sense. Thanks for explaining that to me. Repped sir.

Dzel

Questions answered! Love it I had no idea that the HKS EBC had all those capabilities

__________________
10secWS6
IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

NitrousZ34

Yeah we are in the same boat! I would be pretty shiiit out of luck if it wasn't for the guys on this forum. I have learned so much over this past year

Dzel

Wow I just raised that this thread is almost a year old! Sasha what's a customers wait time for everything to be delivered

__________________
10secWS6
IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

BlkNismo

I have never used the AEM unit, but I would assume being it is electronic rather then mechanical, that it has a gain function that would allow you to raise boost pressure up top if it is falling in upper rpms.

Boosted Performance

Yeah, it is an oldie now.

I have started fabrication on ten kits, and will do my best to get these finished as soon as possible. However, quality will always come before quantity...and quality always takes a bit longer.

I am thinking of taking deposits in May. At this time (once a deposit is received) I would send the following items:

Oil pan spacer
RTV (for oil spacer install)
Oil cooler
All oil lines
Fuel injectors
Fuel pump
Fuel pump correction kit
UpRev tuner cables
Manuals
Drill/tapp kit for the intake manifold (BOV vacuum source)

and a few other small items...

This would allow the DIY guys to get most of the stuff out of the way, and ready for the easy part...the pipes (both exhaust and intercooler).

The car can be then checked for any oil leaks, and proper function of pumps, inectors cooling system..ect. After that the rest of the kit would follow. Installing the piping is rather easy/straight forward so it would not take long at all.

__________________
750WHP starting @ $7,500 to the door
FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html
FB: https://www.facebook.com/Boosted-Per...6303179791462/
IG @boostedperformanceyeg

Dzel

Sweet I'm leaning to taking to The Shop I told you about but I would really love to install this with a buddy of mine that works on after market turbos on pick ups

__________________
10secWS6
IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

Cbtech

Sasha i sent you an email.