Boosted Performance single turbo build

wheee! · 01-22-2013, 02:21 PM

... already anticipating the Boosted Performance Passenger Seat Mount Twin Scroll AT Turbo kit!!!

chrischhorn · 01-22-2013, 11:05 PM

Quote:

Originally Posted by chrischhorn

so if i use your manifold from the 350, in theory it should work? itll tuck up the same and all? what about the intercooler piping and what not?

any input on this sasha?

djtodd · 01-22-2013, 11:38 PM

The 350/momentum headers line up differently IIRC

Boosted Performance · 01-22-2013, 11:47 PM

Quote:

Originally Posted by chrischhorn

any input on this sasha?

It is hard to say to be honest. In theory, a set of VQ35 manifolds should work on the VQ37 with a set of DE manifolds, but that is the theory...

IMO the OEM 370z maniflds are great, and will support all the power you can throw at it.

Boosted Performance · 01-27-2013, 09:47 PM

Quote:

Originally Posted by chrischhorn

so if i use your manifold from the 350, in theory it should work? itll tuck up the same and all? what about the intercooler piping and what not?

So I tried something today with regards to the 350z manifold inquiry. I took the 370z down pipe that bolts up to the turbo outlet, and the second section that I built to make this kit compatable with the OEM exhaust, and bolted it up my own 350z...this section:

370z:

The same pipes on my 350z (exuse the stick, it is just there to hold the turbo up while I check clearances):

It was a perfect fit, and the turbo sat just where I would want it...same location as on the 370z.

This makes me think that a 350z twin scroll turbo manifold would indeed bolt up to a set of DE headers on a VHR engine.

Thought I share that..I was a bit suprised. The axle back exhaust flanges on the 350z and the 370z are in the same location.

SS_Firehawk · 01-27-2013, 10:12 PM

That is great news for a lot of folks. Awesome. If the 7AT can work with whatever you design for it, you may have more business than you know what to do with.

Boosted Performance · 01-27-2013, 10:16 PM

Quote:

Originally Posted by SS_Firehawk

... you may have more business than you know what to do with.

Too late

, already there.

I am up for an awesome promotion at my day job as well, so this will remain as a side venture.

chknhawk · 01-27-2013, 10:40 PM

Congrats on the promotion. And thanks for your contributions this far!

chrischhorn · 01-30-2013, 03:51 AM

Quote:

Originally Posted by Boosted Performance

So I tried something today with regards to the 350z manifold inquiry. I took the 370z down pipe that bolts up to the turbo outlet, and the second section that I built to make this kit compatable with the OEM exhaust, and bolted it up my own 350z...this section:

370z:

The same pipes on my 350z (exuse the stick, it is just there to hold the turbo up while I check clearances):

It was a perfect fit, and the turbo sat just where I would want it...same location as on the 370z.

This makes me think that a 350z twin scroll turbo manifold would indeed bolt up to a set of DE headers on a VHR engine.

Thought I share that..I was a bit suprised. The axle back exhaust flanges on the 350z and the 370z are in the same location.

Honestly......this made me tear up from so much happiness lol

GaleForce · 02-02-2013, 10:07 AM

Just an update for those interested in this kit. Here's a short video of the first start up after I installed the Boosted Performance turbo kit.

This was installed by myself (I have very limited automotive experience) in my garage with the car on jack stands using basic hand tools. Like Sasha has said earlier in this thread, if you can install HFC, you can install this kit. Installing my gauges was harder/more work than installing the turbo kit.

The car started first try and I only had one small leak on a pre-installed fitting. Easy fix. If you are at all worried about tackling this on your own, don't be.

swiss370Z · 02-02-2013, 12:24 PM

Hey GaleForce

BIG respect for your own installation!

Good luck for the rest of the process

May the force be with you

Best regards from the other side of the world
Ivo

VSS370z · 02-02-2013, 03:05 PM

Hey GaleForce could you help me identify the 3 specific Defi gauges you use for the stock location(they look sweet by the way), i could only make out the Oil Pressure one and the one on the left side? And were did you got them? Thanks

Great video too!

GaleForce · 02-02-2013, 06:54 PM

Quote:

Originally Posted by swiss370Z

Hey GaleForce

BIG respect for your own installation!

Good luck for the rest of the process

May the force be with you

Best regards from the other side of the world
Ivo

Thanks

Quote:

Originally Posted by VSS370z

Hey GaleForce could you help me identify the 3 specific Defi gauges you use for the stock location(they look sweet by the way), i could only make out the Oil Pressure one and the one on the left side? And were did you got them? Thanks

Great video too!

PM'd you.

chewy08753 · 02-02-2013, 08:46 PM

Awesome job!!! And gale force can you pm me those gauge part numbers also
Thanks

irondoc · 02-02-2013, 08:59 PM

Ditto on the info Re; the aftermarket gauges, thanks.

01-22-2013, 02:21 PM	#1426 (permalink)
wheee! A True Z Fanatic Join Date: Sep 2009 Location: Mod Capital of Canada Age: 58 Posts: 7,354 Drives: cars. lots of cars. Rep Power: 40182	... already anticipating the Boosted Performance Passenger Seat Mount Twin Scroll AT Turbo kit!!! GaleForce, Mitco39, m3chhawk and 1 others like this. __________________ H&R / Stillen / Berk / HKS / Swift / Michelin / UpRev / SPC / Amuse Rep / Seibon / Fringe XVO / TWM / more... My Journal

01-27-2013, 10:12 PM	#1431 (permalink)
SS_Firehawk Premium Member Join Date: Oct 2011 Location: Tampa Posts: 4,142 Drives: 13' Magma Red Nismo Rep Power: 7335	That is great news for a lot of folks. Awesome. If the 7AT can work with whatever you design for it, you may have more business than you know what to do with. __________________ Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI New Car: Under Construction

01-27-2013, 10:40 PM	#1433 (permalink)
chknhawk Track Member Join Date: May 2012 Location: Kentucky Posts: 541 Drives: Like a batouttahell! Rep Power: 14	Congrats on the promotion. And thanks for your contributions this far! Nut_N_Much likes this. __________________ \| AEM \| INVIDIA \| GREDDY \| STANCE \| NISMO \| SETRAB \| STOPTECH \| HAWK \| TOYO \| HANKOOK \| BRIDE (wishlist) \|

02-02-2013, 10:07 AM	#1435 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51865	Just an update for those interested in this kit. Here's a short video of the first start up after I installed the Boosted Performance turbo kit. This was installed by myself (I have very limited automotive experience) in my garage with the car on jack stands using basic hand tools. Like Sasha has said earlier in this thread, if you can install HFC, you can install this kit. Installing my gauges was harder/more work than installing the turbo kit. The car started first try and I only had one small leak on a pre-installed fitting. Easy fix. If you are at all worried about tackling this on your own, don't be. ENT-Z, wheee!, Imtired and 10 others like this. __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

02-02-2013, 12:24 PM	#1436 (permalink)
swiss370Z Track Member Join Date: Jun 2011 Location: In the Mountains Posts: 649 Drives: VW UP! 1.0 Ltr Rep Power: 15	Hey GaleForce BIG respect for your own installation! Good luck for the rest of the process May the force be with you Best regards from the other side of the world Ivo __________________ /// ONE LAST RIDE /// R.I.P. FAIRLADY Z ///

01-22-2013, 11:38 PM	#1428 (permalink)
djtodd Track Member Join Date: Jun 2012 Location: Lexington, SC Posts: 932 Drives: 2012 Nismo TT Rep Power: 3398	The 350/momentum headers line up differently IIRC

02-02-2013, 03:05 PM	#1437 (permalink)
VSS370z Enthusiast Member Join Date: Apr 2012 Location: Puerto Rico Posts: 380 Drives: 09 Nissan 370z CY M6 Rep Power: 13	Hey GaleForce could you help me identify the 3 specific Defi gauges you use for the stock location(they look sweet by the way), i could only make out the Oil Pressure one and the one on the left side? And were did you got them? Thanks Great video too!

02-02-2013, 08:46 PM	#1439 (permalink)
chewy08753 Base Member Join Date: May 2009 Location: New Jersey Posts: 144 Drives: 2013 911 Carrera Rep Power: 16	Awesome job!!! And gale force can you pm me those gauge part numbers also Thanks __________________

02-02-2013, 08:59 PM	#1440 (permalink)
irondoc Base Member Join Date: Nov 2012 Location: Ohio Posts: 99 Drives: 13 370 6MT sport tou Rep Power: 13	Ditto on the info Re; the aftermarket gauges, thanks.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Twin Turbo vs. Single Turbo V6: A Dissertation	Mike@GTM	Forced Induction	115	08-14-2014 10:04 PM
STS 370Z Single Turbo System	STSTurbo.com	Forced Induction	337	11-21-2012 11:55 AM
Question about a single turbo set up?	dnasty370z	Forced Induction	8	07-26-2012 11:56 AM
New Single Turbo Option.. yes please	Isamu	Forced Induction	108	05-09-2012 09:07 AM
Will we see a SINGLE turbo kit?	Brazilbro	Forced Induction	17	07-03-2009 05:03 PM