Boosted Performance single turbo build

binary0x01

I might turbo the Z at some point, hoping this option works for people...

Eto Kurto!!

__________________
Tune (by Seb@SpecialtyZ) -- Upgraded Parts List : When in doubt, use brute force; if it doesn't work, you aren't using enough.

GaleForce

Just trying to help

__________________

Nixlimited

Car sounds awesome!

__________________
Car Sold! Pleasure being a part of the Z community.
New ride: 2015 GT-R - 647 WHP / 641 WTQ (e85) & 543 WHP / 519 WTQ (91)

Mitco39

Thanks Nix,

I love it, very deep down low and winds out nicely, not to loud at idle just a deep rumble. Cant wait to hear what it sounds like under a WOT shift.

__________________
2007 Chevy Duramax - EFILive Tuned By Me
2010 40th W/ Nav - Boosted Performance - UpRev Tuned By Me
The Mrs. Ride -2012 335XI N55 BMW - Cobb Tuned By Me, Built by her
My Build --> http://www.the370z.com/members-370z-...39s-build.html

SS_Firehawk

Sent a PM a while back. Lost a lot of my mail. Is that jig ready for the stock type exhausts?

__________________

Boosted Performance

Never got a PM regarding that...but yes, the stock exhaust hook-up is now available.

__________________
750WHP starting @ $7,500 to the door
FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html
FB: https://www.facebook.com/Boosted-Per...6303179791462/
IG @boostedperformanceyeg

SS_Firehawk

Resent. When will you start your line with those?

__________________

Boosted Performance

That is a simple change, and it is available now. The entire kit stays the same, including the first down pipe that attaches to the turbine housing, as well as the recirc pipse. Insted of the Y-section that comes with/for the F.I exhaust you get a sinle 3" pipe.

__________________
750WHP starting @ $7,500 to the door
FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html
FB: https://www.facebook.com/Boosted-Per...6303179791462/
IG @boostedperformanceyeg

edub370

on the flutter sound, or compressor surge.. whatever u wanna call it, people can only theorize that this is bad... however, u will NEVER find a case of a turbo failing because of it. slowing down the turbo doesn't hurt anything any more than coming out of boost does...

if someone can find a case of that causing turbo failure, i will eat my own hand

__________________

Mitco39

Through my research after this was pointed out it seems that a bit of flutter is ok. Its when you get to much of a delay in the valve opening do you really start to stress the turbo. Its the fact that the boost is very low when the flutter occurs, under high boost I think you would have some issues.

__________________
2007 Chevy Duramax - EFILive Tuned By Me
2010 40th W/ Nav - Boosted Performance - UpRev Tuned By Me
The Mrs. Ride -2012 335XI N55 BMW - Cobb Tuned By Me, Built by her
My Build --> http://www.the370z.com/members-370z-...39s-build.html

Boosted Performance

This is very true, and only happens during light decelerations. If you were to go WOT and shift you would not have this at all. Light decel will cause the flutter because you are not going to deep vacuum and the BOV does not open up right away. I have driven a few TT Z's as well, and can duplicate the sound in the audio clip heard here.

Correct as well. In order to have the BOV open fully the spring has to be overcome. If the spring is rated to at -18hg, and you shift at -10hg, there will be some flutter, naturally since the BOV did not open right fully.

__________________
750WHP starting @ $7,500 to the door
FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html
FB: https://www.facebook.com/Boosted-Per...6303179791462/
IG @boostedperformanceyeg

Dzel

Sasha still waiting on full price with FI 3" exhaust please. And the price for the 3" outlet alone.

__________________
10secWS6
IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

Boosted Performance

Sorry, I never got a PM regarding this (at least one that I cand find). I am assuming you asked somewhere in this thread, and I missed/forgot about it.

Will get back to you on the dual 3" and I assume a 3" cutout?

__________________
750WHP starting @ $7,500 to the door
FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html
FB: https://www.facebook.com/Boosted-Per...6303179791462/
IG @boostedperformanceyeg

Dzel

10-4

__________________
10secWS6
IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

Boosted Performance

1..2...3..ya, that's 6 of them:



It has been a long couple of days. About 20 hours in to these 6 manifolds, and they are about 1/2 way done. Now I need to setup the back purging station (oxygen inside the pipes displaced by argon for a clean weld on the inside) and then go to town. Each manifold will take about 1.5h to weld. Once that is done they go back in the jig, and the last couple of pieces get welded, so the header flanges can be attached. After that, the waste gate tubes and O2 sensor bungs. I plan on doing one per day next week. There is 24 welds per manifold, plus 2 O2 sensor bungs...so it's a bit of work still left to do.

In the mean time, tomorrow will be spend working on the recirc tubes, and hopefully I have time to weld up a down pipe or two. See how things go I guess.


Also, still have one kit without a name on it.

__________________
750WHP starting @ $7,500 to the door
FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html
FB: https://www.facebook.com/Boosted-Per...6303179791462/
IG @boostedperformanceyeg