Boosted Performance single turbo build

Boosted Performance · 10-06-2012, 02:36 PM

Quote:

Originally Posted by bx_superior

Do this and you'll have my sale.

I will do my best. The guys are F.I are great, spoke to Tony for about 15 minutes a short while ago....very nice guy, and has a lot of ideas/views as I do when it comes to taking care of his customers. I am sure we will come up with something soon...they are very busy as well.

As for those still following this...a couple of more morning shots:

Have to go out and get some 3" exhaust clamps for this one:

FastDad · 10-06-2012, 02:37 PM

Sasha (or others) would you know/recommend a shop in the Ottawa area where we can get your kit installed? I'm a bit of a neophyte in the area of force induction although been following related treads for quite a while.

Now that it looks we will not get more power from the next generation of Z's (Mini Z ???), and can get a well engineered canadian product, I think I'm ready for the big jump.
Thanks Sasha, Keep going with the good work.

GaleForce · 10-06-2012, 03:47 PM

Quote:

Originally Posted by FastDad

Sasha (or others) would you know/recommend a shop in the Ottawa area where we can get your kit installed? I'm a bit of a neophyte in the area of force induction although been following related treads for quite a while.

Now that it looks we will not get more power from the next generation of Z's (Mini Z ???), and can get a well engineered canadian product, I think I'm ready for the big jump.
Thanks Sasha, Keep going with the good work.

I'm in Cobourg, just a couple of hours west of you. I'm doing the install myself. I have a good size garage, and own enough tools to do this with ease. After, I'll be driving my car to Vince at R/T tuning for a proper tune. He's approximately 8 hours away, but worth the drive.

If there is anything I can help you with let me know.

GaleForce · 10-06-2012, 10:50 PM

Quote:

Originally Posted by Boosted Performance

The two post cat O2 sensors will go on to the driver side pipe feeding the turbo. Since these are post cat it is ok.

You can see two cicles if you look hard, dirver side down stream of the flex pipe, on the left side or inside..however you want to look at it. (second last pictures)

There will be a bung on the down pipe (about 10" downs tream from turbo) for a wideband sensor.

So, the bung for the wideband sensor will be standard?

Boosted Performance · 10-06-2012, 11:00 PM

Quote:

Originally Posted by GaleForce

So, the bung for the wideband sensor will be standard?

You bet.

sojirovskensi · 10-07-2012, 12:13 AM

@Galeforce
PM'ed

GaleForce · 10-07-2012, 12:38 AM

Quote:

Originally Posted by sojirovskensi

@Galeforce
PM'ed

Returned

Boosted Performance · 10-07-2012, 02:35 PM

Aaaaaaaan all together now:

Tomorrow I will see if I can get a new set of pipes tacked up in the jigs...see how long that takes. Overall I am very happy with how the jigs turned out, and fitment should be perfect. I still have to order a coule of flanges for the Tial MV-S gates. They will be used on the diverter tube, where the gates connect (lower left jig).

Now I need to order some more 2" 90deg elbows..enough for the 6 kits I plan on building right away.

IC piping is much easier to duplicate, so no worries there.

Something to note...The kits will use one Tial BOV not two like the original kit. It will be located at the intercooler inlet just below the scavenge pump on the U bend in this picture:

This is the main reason the kit is a bit cheaper than I had initially posted. At the same time with the BOV being there, those that purchase the kit for California, the charge pipes will look more like a CAI vs. a turbo kit. The only way one can tell the difference is if they look at the intercooler. It closes the OEM bumper opening rather well, so it not as obvoius unless one knows what to look for.

Nixlimited · 10-07-2012, 02:58 PM

Quote:

Originally Posted by ENT-Z

Is losing the crash beam really that big of a deal? Doesn't the FMIC kind of replace it? I haven't examined the beam that closely, but isn't it just hollow aluminum?

As is pointed out above, there is a lot of metal going in its place. That certainly would help. The difference is the crash bar is designed to direct impact energy around the front impact area and into the frame siderails and away from the cockpit. The FMIC is not designed for this purpose. In a serious collision, I would venture to guess that the crash beam would be a significantly safer option.

Not taking anything away from this awesome kit. Just saying that an FMIC and a purpose-built crash beam are apples and oranges from a safety perspective.

sojirovskensi · 10-07-2012, 05:53 PM

Jigs look awesome. I'm already excited!

JMac88 · 10-07-2012, 08:03 PM

Quote:

Originally Posted by Nixlimited

As is pointed out above, there is a lot of metal going in its place. That certainly would help. The difference is the crash bar is designed to direct impact energy around the front impact area and into the frame siderails and away from the cockpit. The FMIC is not designed for this purpose. In a serious collision, I would venture to guess that the crash beam would be a significantly safer option.

Not taking anything away from this awesome kit. Just saying that an FMIC and a purpose-built crash beam are apples and oranges from a safety perspective.

Looks like FI could never be in your future. Wether you lose the crash and replace it with an intercooler, or jam intercoolers behind the crash bar not allowing it to crumple your going to have to give up something. Moral of the story, don't get in an accident lol

NeverBoneStck · 10-07-2012, 08:55 PM

I really hope this fits the G 37 ... Can't wait for the first reviews to start trickling in ...

Mr.Squeeze · 10-07-2012, 08:59 PM

Quote:

Originally Posted by ENT-Z

Is losing the crash beam really that big of a deal? Doesn't the FMIC kind of replace it? I haven't examined the beam that closely, but isn't it just hollow aluminum?

Quote:

Originally Posted by JMac88

Looks like FI could never be in your future. Wether you lose the crash and replace it with an intercooler, or jam intercoolers behind the crash bar not allowing it to crumple your going to have to give up something. Moral of the story, don't get in an accident lol

Round of applause

I agree with what you, the only thing I miss about my crash beam is my tow hook.

The JIG's look awesome

Neo187H · 10-07-2012, 09:32 PM

What all does the "tuner" kit come with as opposed to the complete kit? I'm assuming no fuel pump, injectors or UpRev?

GaleForce · 10-07-2012, 10:47 PM

Quote:

Originally Posted by Neo187H

What all does the "tuner" kit come with as opposed to the complete kit? I'm assuming no fuel pump, injectors or UpRev?

Check this link for your answer, What is included in the tuner kit

Basically like you assume, no fuel support and no UpRev.

10-07-2012, 12:13 AM	#936 (permalink)
sojirovskensi Enthusiast Member Join Date: Sep 2010 Location: Dallas Texas Posts: 287 Drives: 10 Nissan 370z Wh M6 Rep Power: 15	@Galeforce PM'ed __________________ [Volk] [HKS] [Berk] [AEM] [RE-11] [Uprev] [KW V3]

10-07-2012, 02:35 PM	#938 (permalink)
Boosted Performance The370Z.com Sponsor Join Date: Feb 2010 Location: Edmonton, AB Posts: 1,629 Drives: Z's Rep Power: 3382	Aaaaaaaan all together now: Tomorrow I will see if I can get a new set of pipes tacked up in the jigs...see how long that takes. Overall I am very happy with how the jigs turned out, and fitment should be perfect. I still have to order a coule of flanges for the Tial MV-S gates. They will be used on the diverter tube, where the gates connect (lower left jig). Now I need to order some more 2" 90deg elbows..enough for the 6 kits I plan on building right away. IC piping is much easier to duplicate, so no worries there. Something to note...The kits will use one Tial BOV not two like the original kit. It will be located at the intercooler inlet just below the scavenge pump on the U bend in this picture: This is the main reason the kit is a bit cheaper than I had initially posted. At the same time with the BOV being there, those that purchase the kit for California, the charge pipes will look more like a CAI vs. a turbo kit. The only way one can tell the difference is if they look at the intercooler. It closes the OEM bumper opening rather well, so it not as obvoius unless one knows what to look for. fuct, sojirovskensi, GaleForce and 3 others like this. __________________ 750WHP starting @ $7,500 to the door FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html FB: https://www.facebook.com/Boosted-Per...6303179791462/ IG @boostedperformanceyeg

10-07-2012, 05:53 PM	#940 (permalink)
sojirovskensi Enthusiast Member Join Date: Sep 2010 Location: Dallas Texas Posts: 287 Drives: 10 Nissan 370z Wh M6 Rep Power: 15	Jigs look awesome. I'm already excited! GaleForce likes this. __________________ [Volk] [HKS] [Berk] [AEM] [RE-11] [Uprev] [KW V3]

10-07-2012, 08:55 PM	#942 (permalink)
NeverBoneStck A True Z Fanatic Join Date: Oct 2009 Location: Beaverton, Or Posts: 1,110 Drives: 2008 G37 S Rep Power: 18	I really hope this fits the G 37 ... Can't wait for the first reviews to start trickling in ... __________________ Juiced! That is all you need to know !!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Twin Turbo vs. Single Turbo V6: A Dissertation	Mike@GTM	Forced Induction	115	08-14-2014 10:04 PM
STS 370Z Single Turbo System	STSTurbo.com	Forced Induction	337	11-21-2012 11:55 AM
Question about a single turbo set up?	dnasty370z	Forced Induction	8	07-26-2012 11:56 AM
New Single Turbo Option.. yes please	Isamu	Forced Induction	108	05-09-2012 09:07 AM
Will we see a SINGLE turbo kit?	Brazilbro	Forced Induction	17	07-03-2009 05:03 PM

10-06-2012, 02:37 PM	#932 (permalink)
FastDad Base Member Join Date: Oct 2012 Location: Gatineau Posts: 1 Drives: 09 370Z BB M6 Rep Power: 13	Sasha (or others) would you know/recommend a shop in the Ottawa area where we can get your kit installed? I'm a bit of a neophyte in the area of force induction although been following related treads for quite a while. Now that it looks we will not get more power from the next generation of Z's (Mini Z ???), and can get a well engineered canadian product, I think I'm ready for the big jump. Thanks Sasha, Keep going with the good work.

10-07-2012, 09:32 PM	#944 (permalink)
Neo187H Enthusiast Member Join Date: Jan 2009 Location: Albany, NY Posts: 302 Drives: PW 370Z Rep Power: 16	What all does the "tuner" kit come with as opposed to the complete kit? I'm assuming no fuel pump, injectors or UpRev?