05-23-2012, 08:48 AM
|
#10 (permalink)
|
|
The370Z.com Sponsor
Join Date: Feb 2010
Location: Edmonton, AB
Posts: 1,629
Drives: Z's
Rep Power: 3383
|
Quote:
Originally Posted by chrischhorn
looks like there is still plenty of room to screw that on top of the stock oil cooler! no worries from me  IF it does come down to it, ill just remove it and route the coolant line straight through and bypass the stock cooler but like i said, the stock cooler is no more then 2 inches thick so it shouldnt cause a problem. Coolant lines look pushed away enough to not get in the way either. Maybe ill be the first to experiment with this kit with the stock cooler  |
That is as far as you would want to go. The picture is a bit deceiving, because the two plug boolts on the relocation plate are almost touching the coupler. There is not more room than that. I think I spent more time on this
(trying to find a way to route the IC pipe) than I did on the rest of the kit...lol. In the end it is an easy solution.
|
|
|
Similar Threads
1038Likes
Threaded Mode
