05-22-2012, 07:22 PM
|
#1 (permalink)
|
|
The370Z.com Sponsor
Join Date: Feb 2010
Location: Edmonton, AB
Posts: 1,629
Drives: Z's
Rep Power: 3383
|
Quote:
Originally Posted by sfearl1
Sasha, would you suggest the new 3" exhaust from FI over the one the donor car already had installed?
|
To be honest that is a bit of an overkill. You will find a lot of supra guys for example using a single 3" exhaust to make 600whp, and 3.5" single to get well in to the 800's. Dual 3" on a stock block Z is way more than anybody would ever need IMO. Dual 2.5" exhaust will flow more than a single 3.5" as it has a greater combined surface area than a single 3.5" pipe.
Quote:
Originally Posted by chrischhorn
well the '12's use the same filter as the ones without the cooler. The plate is only about 1-1 1/2" thick so it just pushes the filter back a bit. Thats about it though. If thats the case, the relocation kit hose just needs to be 2-3" longer at max to be safe that it reaches and everyone can just trim to fit but good to know!  |
The oil filter relocation kit that I include has to be used with this kit. From there it would only be two oil lines to whatever cooler you have. One line would go from the new oil filter flange "out" port to the oil cooler inlet, and then from the oil cooler outlet back to the new plate where the OEM filter used to sit.
Quote:
Originally Posted by Cell
What kind of oil temps is the test Z getting with the kit so far?
|
Don't know, the car is not tuned yet, so it can't be driven hard enough to get the oil temperatures too high.
Last edited by Boosted Performance; 05-22-2012 at 07:27 PM.
|
|
|
Similar Threads
1038Likes
Hybrid Mode
