Boosted Performance single turbo build

esfourteen · 04-11-2012, 05:51 PM

Quote:

Originally Posted by ZtoG37

with the oil pan spacer will it have clearance issues for us lowered folks or will it sit above the sub frame

The 1" pan spacers sit below the subframe just a bit.

memorylasts · 04-11-2012, 06:02 PM

Quote:

Originally Posted by esfourteen

The 1" pan spacers sit below the subframe just a bit.

Just to add to what es14 said, if your worried you could create an aluminum plate a couple mills thick in the same shape at the stock plastic on the bottom. Not to mention you would have to hit something of decent size or be driving like you dont give a crap... Im pretty low...and this is in my shopping cart just need to save some pennies to buy it.

theaudir8fan · 04-11-2012, 06:03 PM

No love for the greddy oil pan?

Boosted Performance · 04-13-2012, 12:30 AM

Finally, another update:

At this point it is safe to say that the hard part is behind me on this build. Today I did the PITA section of piping that feeds one side of the turbine, coming from bank 1:

I also had to modify the Y-pipe from what I have posted a couple of pages back. This is due to the space available between the dual F.I exhaust and the rear transmission support. I could have kept it as it was, and put a 3" 90deg bend right after the transmission. I would have also had to put another 90deg 3" bend. I do not like 90deg bend on the down pipe, especially that close to the turbo. Just a pet peeve I guess, and at the same time improves flow.

So to avoid that the Y-pipe will look something like this:

You can see it will be a rather straight 3" shot to the turbine outlet:

Y-pipe remains nice and smooth on the inside:

Turbo compressor will have an elbow welded to the outlet:

There may be some that think this is hanging low. Well, I pulled a string from the front subframe to the rear skid plate and you can see where the turbo sits in comparison:

And then, just because it is awesome....the 62mm billet wheel:

By Saturday night I should have the down pipe welded up, and bank 2 fabricated to feed the other side of the twin scroll turbine. Once that is done, the manifold will be welded solid and I will move on to the waste gates.

The oil pan spacers should be here late next week, and the oil relocation kit should arrive tomorrow. Other than that, I am set on completing the build on schedule.

Dzel · 04-13-2012, 12:36 AM

Man it's a beutiful thing your doing. Will your kit when ready come with full exhaust option or just have to get with F.I. or whatever brand you want.

esfourteen · 04-13-2012, 12:37 AM

amazing work, this is coming along nicely

NeverBoneStck · 04-13-2012, 12:38 AM

Can u build a y pipe to fit other exhaust besides fast intentions ?

Boosted Performance · 04-13-2012, 01:41 AM

The kit will fit any exhaust system that would bolt up to the OEM Y-pipe and the F.I exhaust system.

There are no other options because I do have $10,000 to spend on all the exhaust systems, install them, just to just make down pipes for all applicatioins.

Your local exhaust shop can make a simple Y-pipe for you if needed. I bet it would only cost about $150 to od it too.

Dzel · 04-13-2012, 02:20 AM

I would (will)

go custom exhaust on this kit

Jiaim · 04-13-2012, 04:11 AM

The FI exhaust is one of the most popular go this route and don't bother with others.

Good work !

wheee! · 04-13-2012, 08:22 AM

Looks great Sasha! I am looking forward to seeing this car on the road this spring! I know James is....!
+1 again for a great thread.

Scotober · 04-13-2012, 09:01 PM

I too like that it will work with the F.I. Exhaust.

Crumbytoast · 04-13-2012, 09:05 PM

Looks great Sasha..price wise how much r u looking at?

erkthejerk73 · 04-13-2012, 09:05 PM

just installed my FI exhaust today getting preped for this build!

Mr.Squeeze · 04-14-2012, 01:31 PM

Quote:

Originally Posted by erkthejerk73

just installed my FI exhaust today getting preped for this build!

Good choice

Everything looks good Sasha love your work.

04-11-2012, 06:03 PM	#168 (permalink)
theaudir8fan Base Member Join Date: Jul 2011 Location: lonely land up north Posts: 162 Drives: 07 Infiniti G35S PG Rep Power: 14	No love for the greddy oil pan? __________________ 2007 Infiniti G35S 5AT PG; GTM; KW; Hotchkis; Stillen; Berks; SPC; GT-spec; SxExCx

04-13-2012, 12:30 AM	#169 (permalink)
Boosted Performance The370Z.com Sponsor Join Date: Feb 2010 Location: Edmonton, AB Posts: 1,629 Drives: Z's Rep Power: 3382	Finally, another update: At this point it is safe to say that the hard part is behind me on this build. Today I did the PITA section of piping that feeds one side of the turbine, coming from bank 1: I also had to modify the Y-pipe from what I have posted a couple of pages back. This is due to the space available between the dual F.I exhaust and the rear transmission support. I could have kept it as it was, and put a 3" 90deg bend right after the transmission. I would have also had to put another 90deg 3" bend. I do not like 90deg bend on the down pipe, especially that close to the turbo. Just a pet peeve I guess, and at the same time improves flow. So to avoid that the Y-pipe will look something like this: You can see it will be a rather straight 3" shot to the turbine outlet: Y-pipe remains nice and smooth on the inside: Turbo compressor will have an elbow welded to the outlet: There may be some that think this is hanging low. Well, I pulled a string from the front subframe to the rear skid plate and you can see where the turbo sits in comparison: And then, just because it is awesome....the 62mm billet wheel: By Saturday night I should have the down pipe welded up, and bank 2 fabricated to feed the other side of the twin scroll turbine. Once that is done, the manifold will be welded solid and I will move on to the waste gates. The oil pan spacers should be here late next week, and the oil relocation kit should arrive tomorrow. Other than that, I am set on completing the build on schedule. Last edited by Boosted Performance; 04-13-2012 at 02:22 AM.

04-13-2012, 12:36 AM	#170 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 23	Man it's a beutiful thing your doing. Will your kit when ready come with full exhaust option or just have to get with F.I. or whatever brand you want. __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

04-13-2012, 12:37 AM	#171 (permalink)
esfourteen A True Z Fanatic Join Date: Mar 2010 Location: LI, NY Posts: 1,375 Drives: 40th TT Rep Power: 18	amazing work, this is coming along nicely __________________ Build Thread \| GTM TT Install Thread \| Engine Build Thread

04-13-2012, 12:38 AM	#172 (permalink)
NeverBoneStck A True Z Fanatic Join Date: Oct 2009 Location: Beaverton, Or Posts: 1,110 Drives: 2008 G37 S Rep Power: 18	Can u build a y pipe to fit other exhaust besides fast intentions ? __________________ Juiced! That is all you need to know !!

04-13-2012, 01:41 AM	#173 (permalink)
Boosted Performance The370Z.com Sponsor Join Date: Feb 2010 Location: Edmonton, AB Posts: 1,629 Drives: Z's Rep Power: 3382	The kit will fit any exhaust system that would bolt up to the OEM Y-pipe and the F.I exhaust system. There are no other options because I do have $10,000 to spend on all the exhaust systems, install them, just to just make down pipes for all applicatioins. Your local exhaust shop can make a simple Y-pipe for you if needed. I bet it would only cost about $150 to od it too.

04-13-2012, 02:20 AM	#174 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 23	I would (will) go custom exhaust on this kit __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

04-13-2012, 04:11 AM	#175 (permalink)
Jiaim Base Member Join Date: Jul 2010 Location: France Posts: 6 Drives: Enthusiast Rep Power: 15	The FI exhaust is one of the most popular go this route and don't bother with others. Good work !

04-13-2012, 08:22 AM	#176 (permalink)
wheee! A True Z Fanatic Join Date: Sep 2009 Location: Mod Capital of Canada Age: 57 Posts: 7,354 Drives: cars. lots of cars. Rep Power: 40182	Looks great Sasha! I am looking forward to seeing this car on the road this spring! I know James is....! +1 again for a great thread. __________________ H&R / Stillen / Berk / HKS / Swift / Michelin / UpRev / SPC / Amuse Rep / Seibon / Fringe XVO / TWM / more... My Journal

04-13-2012, 09:01 PM	#177 (permalink)
Scotober Base Member Join Date: Jul 2010 Location: Texas Posts: 30 Drives: 370Z 40th Rep Power: 15	I too like that it will work with the F.I. Exhaust. __________________ F.I. CBE CF w/ 18" Res \| LED Plate \| Build 487/1000

04-13-2012, 09:05 PM	#178 (permalink)
Crumbytoast Base Member Join Date: Mar 2012 Location: Charlotte nc Posts: 7 Drives: 2012 370z nismo Rep Power: 13	Looks great Sasha..price wise how much r u looking at?

04-13-2012, 09:05 PM	#179 (permalink)
erkthejerk73 Track Member Join Date: Mar 2011 Location: cincinnati Posts: 927 Drives: 13 F150 FX4 eb Rep Power: 15	just installed my FI exhaust today getting preped for this build!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Twin Turbo vs. Single Turbo V6: A Dissertation	Mike@GTM	Forced Induction	115	08-14-2014 10:04 PM
STS 370Z Single Turbo System	STSTurbo.com	Forced Induction	337	11-21-2012 11:55 AM
Question about a single turbo set up?	dnasty370z	Forced Induction	8	07-26-2012 11:56 AM
New Single Turbo Option.. yes please	Isamu	Forced Induction	108	05-09-2012 09:07 AM
Will we see a SINGLE turbo kit?	Brazilbro	Forced Induction	17	07-03-2009 05:03 PM