Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Forced Induction (http://www.the370z.com/forced-induction/)
-   -   Boosted Performance single turbo build (http://www.the370z.com/forced-induction/52577-boosted-performance-single-turbo-build.html)

Cell 05-05-2012 03:49 PM

Quote:

Originally Posted by JMac88 (Post 1705521)
Base tune seems a bit off but still driveable. Brought a smile to my face...:happydance:

reviews and videos after tune please. :driving:

Dzel 05-05-2012 08:34 PM

Quote:

Originally Posted by JMac88 (Post 1705521)
Base tune seems a bit off but still driveable. Brought a smile to my face...:happydance:

Sasha are you going to go over the re tune of the car and have those settings programmed for the rest of the kits?

wheee! 05-05-2012 09:09 PM

Each car is unique so I think a base tune is going to be standard, followed by a custom tune after install...

getting a close tune with James' car is possible but it may not be the best tune for a base map; better to play it safe until you get a chance to dyno it.

sfearl1 05-05-2012 09:37 PM

Sasha pointed out earlier in the thread that the base tune will be provided just to get you from point A to point B - the installation to the dyno to tune.

Dzel 05-05-2012 11:21 PM

Ahhh I must of missed that

Boosted Performance 05-06-2012 03:01 PM

UPDATE:


James (customer/owner) came by last night and got the car out on the road. After a short drive everything seemd good, even the base map was very good. He parked the car for 30 minutes, and came back to start it up and go for another quick spin. Shortly after strarting he noticed smoke out the back (exhaust)....after a couple of texts we agreed that it was best to come back this morning for me to go over everything...ensuring him that it is not a big deal....(don't think he bought any of it though :lol:)


I got the car on the lift, and noticed a bit of oil resedue coming out of the turbine housing...both sides. I made sure that the pump was working, and dwawing good vaccum, so that was not the issue. This confirmed that the turbo seals could not have possibly blown, and everythig else looked very good.

When I installed the oil feed line, I did not install a check valve at the turbo oil inlet as I do with the 350z kits. Reason behind that is that the oil line feeding the turbo with this kit is very short, and even if it was to completely drain, it was not going to be enough oil to fill the small reservoir I use at the turbo drain. I was wrong...it seems that there is still pressure left in the system after shut down, and that the path of least resistance is taken by the oil to relieve this pressure. It turns out that the path of least resistance is the turbo. So after he shut the car down, the oil reservoir filled up, as did the turbo. With the oil sitting in the center section some leaked past the seals and in to the turbine housing/exhaust. When he went to run the car, this oil started to burn up causing the smoke. No harm done...just a bit of oil going past the turbo seals.

I installed a check valve this morning, and we went out for a spin....all is perfect. No smoke (after it all burnt up from yesterdays leak) and the car pulls great, sounds amazing, and sure puts a smile on the drivers face. We did a few WOT pulls so the logs can be sent out for analysis, and we shall go on from there. I must admit that the turbo combo with the F.I exhaust is just perfect, quieter than on a stock block, making this car the perfect sleeper.

The car will get some miles on it now, and come back for another visual inspection. If all is good, this was a complete success, and I will proceed with making the jigs for this kit. This will take a bit of time as the jigs will be complex, and take time to build just right.


I would really like to thank Vince at R/T tuning for coming through with the base map...I can't believe how good it is considering he has never seen this kit. I would highly recommend him and his services to anybody. He really is the UpRev guru.

theaudir8fan 05-06-2012 03:15 PM

Can't tell you how great and refreshing it is for kit builders to post the issues that they have encountered along with solutions, instead of just posting the positives. Great work Sasha :D

Boosted Performance 05-06-2012 03:18 PM

Quote:

Originally Posted by theaudir8fan (Post 1706569)
Can't tell you how great and refreshing it is for kit builders to post the issues that they have encountered along with solutions, instead of just posting the positives. Great work Sasha :D

Yeah, I am a bit different when it comes to that...it's not always perfect the first time, but it was very close to it.

Sysopz 05-06-2012 03:22 PM

Vince @ R/T is an awesome guy and really cares about his customers, I will never take my car to anyone else. He tuned my Z and even with just the simple mods I have it feels like a totally different car and is a blast to drive.

JMac88 05-06-2012 03:34 PM

Ok so I know everyone is going to want vids ect...

While Sasha was working on the car I added swifts and some re-11 305's to the back. Car is in desperate need of an alignment before I really start opening her up. Hopefully I will have some vids later this week.

Sysopz 05-06-2012 03:39 PM

I would love to see some Videos even though I already decided to go with Sash's kit as soon as I can get my hands on one. I have been following your build from the start and his work looks amazing I am so fired up to get it done to my car.

zguynate 05-06-2012 03:40 PM

Selling a kidney later this year to buy this kit.

Neo187H 05-06-2012 04:12 PM

Quote:

Originally Posted by JMac88 (Post 1706589)
Ok so I know everyone is going to want vids ect...

While Sasha was working on the car I added swifts and some re-11 305's to the back. Car is in desperate need of an alignment before I really start opening her up. Hopefully I will have some vids later this week.

When are you going to put the car on the dyno for fine tuning and some numbers?

Baer383 05-06-2012 04:39 PM

:iagree:

wheee! 05-06-2012 05:31 PM

Getting Dyno time in our city is a problem. There are NO UpRev tuners in our city. We are looking at flying someone in to tune the cars this June....


All times are GMT -5. The time now is 11:07 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2