Ram Air

Pic9148 · 03-01-2012, 08:33 AM

Has anyone tried the ram air, by removing the fang plates(pros -cons)

m4a1mustang · 03-01-2012, 08:34 AM

Ram air for what? You can remove the fang plates but then you need to direct the air somewhere for it to do anything.

Lemers · 03-01-2012, 08:40 AM

There is a mod for that on this forum.

LafitteZ · 03-01-2012, 01:21 PM

Its gotta make some difference if done right. I think the intakes would have to be insulated from the engine heat to tho. I think itll work only because it would lower intake temps but i can see it being too signifgant as in power wise. i COULD BE WRONG THO

fuct · 03-01-2012, 02:11 PM

this has been brought up before. i think someone was testing the gen 3 stillen with and without a front bumper. they had fans blowing on the filters in one test. the outcome wasnt a huge increase in power. actually i think there were issues with turbulence.

our factory intake system isnt that bad to begin with.

m4a1mustang · 03-01-2012, 02:13 PM

Quote:

Originally Posted by fuct

this has been brought up before. i think someone was testing the gen 3 stillen with and without a front bumper. they had fans blowing on the filters in one test. the outcome wasnt a huge increase in power. actually i think there were issues with turbulence.

our factory intake system isnt that bad to begin with.

It's very efficient.

Pic9148 · 03-01-2012, 02:20 PM

lemers do you know where I could find that forum

03-01-2012, 02:22 PM

Diy

Spikuh · 03-01-2012, 02:36 PM

Here is the one from Modshack

http://www.the370z.com/diy-section-d...ur-airbox.html

KaienZ34 · 03-01-2012, 02:39 PM

DIY: Fresh Air Ducting for Stillen G3 Users

Lemers · 03-01-2012, 02:50 PM

Quote:

Originally Posted by Spikuh

Here is the one from Modshack

http://www.the370z.com/diy-section-d...ur-airbox.html

That's the one

fuct · 03-01-2012, 04:11 PM

your better off making duct work for the brakes. there is very lil to gain by home depot-ing your front end.... :\

Lemers · 03-01-2012, 04:56 PM

Quote:

Originally Posted by fuct

your better off making duct work for the brakes. there is very lil to gain by home depot-ing your front end.... :\

How about a front splinter made from garden liner?

DIY Front Lip... - Club RSX Message Board

m4a1mustang · 03-01-2012, 05:03 PM

Quote:

Originally Posted by Lemers

How about a front splinter made from garden liner?

DIY Front Lip... - Club RSX Message Board

NYBladeZ · 03-01-2012, 05:05 PM

Didn't think ram air was good enough for my Mustang, definitely won't do it to my Z. Save your $ for some real intakes. The cost for MAF tubes and drop ins will probably be marginally more than a ram air diy.

03-01-2012, 08:33 AM	#1 (permalink)
Pic9148 Base Member Join Date: Jan 2012 Location: Shelton,CT Posts: 49 Drives: 2009 370Z Sport Auto Rep Power: 13	Ram Air Has anyone tried the ram air, by removing the fang plates(pros -cons)

03-01-2012, 08:34 AM	#2 (permalink)
m4a1mustang A True Z Fanatic Join Date: Feb 2009 Location: Northern VA Posts: 55,385 Drives: on two wheels Rep Power: 6962	Ram air for what? You can remove the fang plates but then you need to direct the air somewhere for it to do anything. __________________ - Steve Zs & Coffee - Saturdays at 10AM in Fairfax, VA and Columbia, MD (Click the banner!) LIKE us on Facebook!

03-01-2012, 08:40 AM	#3 (permalink)
Lemers A True Z Fanatic Join Date: Mar 2010 Location: Izmir, Turkey Posts: 15,371 Drives: 2012 Traverse LTZ Rep Power: 52	There is a mod for that on this forum. __________________ 2010 Black Cherry Touring/Sport/Nav Now - 2012 Travese LTZ until I leave for Turkey

03-01-2012, 02:39 PM	#10 (permalink)
KaienZ34 A True Z Fanatic Join Date: Oct 2009 Location: LA. not L.a. Posts: 21,652 Drives: Z34 Tour/Sport Rep Power: 178	DIY: Fresh Air Ducting for Stillen G3 Users __________________ *"These Violent Delights Have Violent Ends"* http://www.the370z.com/members/kaienz34-albums-z34.html

03-01-2012, 05:05 PM	#15 (permalink)
NYBladeZ A True Z Fanatic Join Date: Apr 2009 Location: New York Posts: 2,158 Drives: Lotus Exige S Rep Power: 20	Didn't think ram air was good enough for my Mustang, definitely won't do it to my Z. Save your $ for some real intakes. The cost for MAF tubes and drop ins will probably be marginally more than a ram air diy. __________________ 2009 Carbon Fiber/Red 370z aka Trish: Sports Package, Meisterschaft full catback, Fast Intentions Longtube Headers, Injen Long Tube Intakes, UpRev Tune: Sold 2008 Lotus Exige S Club Racer aka Bella, always leaves me smiling

03-01-2012, 01:21 PM	#4 (permalink)
LafitteZ Track Member Join Date: Jan 2011 Location: lafitte, la Posts: 698 Drives: 40th anniversary Rep Power: 15	Its gotta make some difference if done right. I think the intakes would have to be insulated from the engine heat to tho. I think itll work only because it would lower intake temps but i can see it being too signifgant as in power wise. i COULD BE WRONG THO

03-01-2012, 02:11 PM	#5 (permalink)
fuct A True Z Fanatic Join Date: May 2009 Location: Sugar Land Posts: 3,692 Drives: 97' Ranger :) Rep Power: 24	this has been brought up before. i think someone was testing the gen 3 stillen with and without a front bumper. they had fans blowing on the filters in one test. the outcome wasnt a huge increase in power. actually i think there were issues with turbulence. our factory intake system isnt that bad to begin with.

03-01-2012, 02:20 PM	#7 (permalink)
Pic9148 Base Member Join Date: Jan 2012 Location: Shelton,CT Posts: 49 Drives: 2009 370Z Sport Auto Rep Power: 13	lemers do you know where I could find that forum

03-01-2012, 02:22 PM	#8 (permalink)
David Parra Guest Posts: n/a	Diy

03-01-2012, 02:36 PM	#9 (permalink)
Spikuh A True Z Fanatic Join Date: Jul 2009 Location: The Ark Posts: 2,357 Drives: '09 370z Rep Power: 21	Here is the one from Modshack http://www.the370z.com/diy-section-d...ur-airbox.html

03-01-2012, 04:11 PM	#12 (permalink)
fuct A True Z Fanatic Join Date: May 2009 Location: Sugar Land Posts: 3,692 Drives: 97' Ranger :) Rep Power: 24	your better off making duct work for the brakes. there is very lil to gain by home depot-ing your front end.... :\