GTM Performance Engineering: Stage 1 Supercharger Upgrade Kit 500whp capable

SAM@GTM

We here at GTM are thoroughly excited to share the results of the Stage 1 Supercharger Upgrade kit. We tirelessly push the envelope and we're never satisfied!

For those of you not familiar with this upgrade kit, it effectively uses the intake system and supercharger compressor housing of our Stage 2 Supercharger kit to help the Stage 1 Supercharger breathe better. And oh, does it ever breathe!

Below is the list of all the parts that comes in this upgrade :

GTM SC Compressor housing C38-81 V band type
GTM SC Pulley 92mm
GTM Power St Fitting
GTM Power St Hose
GTM Breather Filter
GTM Urethane Eng Mount
GTM 3" MAF Piping
GTM 3" Inlet Intake
GTM 4.5" Intake Filter
GTM Transition Couplers
GTM T-Bolt 3" V-band Clamp
GTM SC Belt
GTM Base ECU Map

Depending on Pulley size, We recommend the following :

Bosch EV14 650cc injector upgrade
GTM Fuel Pump Voltage Stabilizer kit
Custom Dyno Tuning

With these breathing parts added to the C38-81 supercharger in our Stage 1 kit, we were able to squeeze every last drop of horsepower out of that blower. More, in fact, than anyone gave this blower credit for.

Below is the dyno graph. The BLUE lines are a bone stock 2011 Nismo 370Z.

The RED lines are the same car with our Stage 1 S/C and upgrade kit, 10psi of boost, test pipes, and HKS Cat-back Exhaust on 91 octane pump gas.

The GREEN Lines are the same mods except a smaller pulley, 11psi of boost on 93 octane gas.


For people that don't have our Supercharger yet and want this kind of performance out of the box, we'll be offering a Stage 1.5 Supercharger Kit so you can have great performance with a good price point.

Baer383

Sam you weren't kidding that is very impressive.

I will call you Monday to talk to you about the upgrade.


Thanks Frank

P.S. email me stage 1 instructions I already have stage 2.

__________________
2013 ZL1

754 rwhp 747 rwtq

Ron

Where's theDreamer? Matt come get one of these!

__________________
2011 Twin Turbo PW nismo #113 - My Journal - My TT Build Thread
[ GTM GTX Stg2 TT || HKS EVC6 || Custom CarPC || F.I 3'' TDX CBE || SB 6puck clutch/ZSpeed CSC || BC BR Coilovers || SPC camber arms || Work VSS-X || Custom Headlights || PW:JDM CF Covers || Seibon CF Engine Cover ]

Zat_Zuma

Very nicely done

__________________
[B]2009 & 2017 370Z Touring Sport Autos SOLD

KevinB

What's the price point of the 1.5?

__________________
09 6MT MB: Int/Ext LEDs, Stillen G3 + FI test pipes + FI cat back + Stillen sways + Clutch Helper Spring

edub370

(price of stage 1 + price of stage 2)/2 ?????

haha i really wouldnt be surprised if that was close but idk

__________________

theDreamer

Hahaha

__________________
theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN
theDreamer's Silvia // URAS // GREDDY
Houston Zs // Facebook // Twitter // Instagram

phunk

damn that is some really good output to get out of a clean fit supercharger kit.

well done.

__________________

prescott3656

On the Website it's about $1300 for the upgrade with one engine mount and about $1500 with both mounts. Not too bad IMO, might be ordering this in the coming months...

Mike@GTM

For the upgrade kit, it is $1,326.53 Here's the link: GTM Motorsports*::*FORCED INDUCTION*::*GTM STAGE ONE SUPERCHARGER COMPRESSOR HOUSING/INTAKE UPGRADE

For the Stage 1.5 Supercharger Turn-Key kit, it is $7,172.00 Here's the link to that: GTM Motorsports*::*FORCED INDUCTION*::*GTM 370Z 550HP STG1.5 SUPERCHARGER (TURN KEY) KIT

SPOHN

At what point is the fuel pump votage stabilizer needed? Just when upgraded fuel pump and injectors? And what flaws lie in the stock system that this is needed?

__________________

Mike@GTM

Thank you! I'm happy we were able to pull this off and really show just how impressive the Rotrex units really are. Of all the supercharger units we've ever worked with, Rotrex makes the best ones, hands down. I'm really surprised that they have such low market penetration here in the US. It seems people in general are very resistant to progress and technological advances. Too bad, really...they're missing out. lol

Mike@GTM

When we were developing the Stage 2 Supercharger kit, we found that air/fuel ratios were not being consistent. This was very strange because we hadn't run into that problem on our Twin Turbo kits on the 370Z or any of the earlier VQ cars we have Forced Induction Systems for.

We did a lot of digging, data logging and testing to find the root cause of the issue. You see, on the 370Z, Nissan changed the wiring to the factory fuel pump wiring harness. On the stock fuel pump it's no big deal and in fact the older Z's and G's were a bit overkill on the wiring side of things. What we discovered, was that voltage was dropping when the fuel pump was working the hardest and drawing the most power. We developed our Fuel Pump Voltage Stabilizer to make sure that the fuel pump gets the voltage it needs to operate properly all the time without having any fuel delivery issues.

It has been alluded to in the past as to why this isn't an issue on the twin turbo cars before, but I'll go over it again just briefly here. Twin Turbos do not consume horsepower in order to produce positive manifold pressure the same way that a supercharger does. That means that in order to get XXXwhp from a supercharger, you need XXX + the amount of power the charger consumes. As such, there is significantly more fuel demand on a supercharged car at peak power than the equivalent power turbocharged car.

Now, you asked "at what point" it is required. The answer is "it depends". On our supercharger kits, if you are going for 480+whp, it's a good idea. There may be cars that have a lower threshold than that, and there may be cars that can tolerate more power. There's a lot of variables involved, but we take the stance of "better safe than sorry" with this and include it as part of our Stage 2 Supercharger kit and highly recommend it with the Stage 1.5 system. It is also available on its own for those that purchased systems from other companies that don't take things quite as seriously as we do. Remember, we don't just make a kit, we engineer the whole shebang to make sure that no matter what power or performance you are after, you have the products available to have everything mesh together cohesively.

theaudir8fan

wow, great results, can't believe it did that well

__________________
2007 Infiniti G35S 5AT PG; GTM; KW; Hotchkis; Stillen; Berks; SPC; GT-spec; SxExCx

SPOHN

Very interesting read. Nice to see you guys take it to the next step. GTM is truly innovators in this business. Thanks.

__________________