max hp and stock maf

Nissan370 · 02-17-2012, 03:54 PM

any high hp guys max the maf out yet on our cars

just tring to get an idea at what hp lvl's we need new maf sensors.
thxs

Boosted Performance · 02-17-2012, 05:09 PM

Depends on the size of the charge piping that they are housed in. The MAF sensors in 2.75" charge piping will do about 600whp (DJ). If you go with 3" charge piping that number will go up.

bullitt5897 · 02-17-2012, 05:17 PM

We didn't change the mafs until we went above 1000hp

Mike@GTM · 02-17-2012, 05:40 PM

Quote:

Originally Posted by Boosted Z

Depends on the size of the charge piping that they are housed in. The MAF sensors in 2.75" charge piping will do about 600whp (DJ). If you go with 3" charge piping that number will go up.

Absolutely correct. One thing I'd like to add is that superchargers do eat up some of the power, so the apparent power threshold will be less. That's why we went to 3" charge piping on our Stage 2 Supercharger Kit.

Nixlimited · 02-17-2012, 05:59 PM

Quote:

Originally Posted by Mike@GTM

Absolutely correct. One thing I'd like to add is that superchargers do eat up some of the power, so the apparent power threshold will be less. That's why we went to 3" charge piping on our Stage 2 Supercharger Kit.

Any progress on that stage 1.5 SC modification?

Mike@GTM · 02-17-2012, 06:21 PM

Quote:

Originally Posted by Nixlimited

Any progress on that stage 1.5 SC modification?

We're almost ready to do preliminary testing.

Nixlimited · 02-17-2012, 06:44 PM

Quote:

Originally Posted by Mike@GTM

We're almost ready to do preliminary testing.

Need a car for some testing?

Boosted Performance · 02-17-2012, 09:25 PM

Quote:

Originally Posted by Bullitt@UAMotorsports

We didn't change the mafs until we went above 1000hp

I don't understand how this is possible if the above is true? Did you use 4" charge piping?

roplusbee · 02-18-2012, 09:47 PM

Interesting..............

Vince@R/T · 02-19-2012, 12:11 PM

Quote:

Originally Posted by Bullitt@UAMotorsports

We didn't change the mafs until we went above 1000hp

Pretty sure you guys used UPREV GT Maf's on your car. This is the link that Sam posted to the set up

GTM Performance Engineering 1000HP MAF CALIBRATIONN -ANOTHER MILE STONE

SAM@GTM · 02-19-2012, 04:20 PM

Quote:

Originally Posted by Nissan370

any high hp guys max the maf out yet on our cars

just tring to get an idea at what hp lvl's we need new maf sensors.
thxs

Two main factors, Maf location and pipe diameter, With our blow through set up and our 3" piping you will be at 4.8 to 4.9 volts in the 600 WHP mark. this have been very consistent due to our Maf locations.

Now if you have the stillen draw through set up then your mafs will max out much sooner, I have seen them max out at low 400WHP .

Quote:

Originally Posted by Vince@R/T

Pretty sure you guys used UPREV GT Maf's on your car. This is the link that Sam posted to the set up

GTM Performance Engineering 1000HP MAF CALIBRATIONN -ANOTHER MILE STONE

No They are not the GT mafs's Calibration from UPREV, as i have said that before in that same thread. Our calibration has much bigger sealing.

Quote:

Originally Posted by SAM@GTM

There is one source for those after market maf sensors, These are the same sensors that UPrev, AAM, AMS uses, We are just applying our own Calibration on them .

Sam

SAM@GTM · 02-19-2012, 04:31 PM

Quote:

Originally Posted by Nixlimited

Any progress on that stage 1.5 SC modification?

Been on the dyno all today working on new set maps for the upgraded compressor housing on our GTM stage one. I'm still working on the 91 gas maps right now.

The results are very good as expected, let me just say we are making over 450WHP on the stage one with flat torque curve all the way to red line .

Sam

Zat_Zuma · 02-19-2012, 04:57 PM

Thats what I like to hear

Nixlimited · 02-19-2012, 07:59 PM

Quote:

Originally Posted by SAM@GTM

Been on the dyno all today working on new set maps for the upgraded compressor housing on our GTM stage one. I'm still working on the 91 gas maps right now.

The results are very good as expected, let me just say we are making over 450WHP on the stage one with flat torque curve all the way to red line .

Sam

How does the area under the curve compare to the stage 2? I really only want 450 WHP, but the responsiveness and torque curve of the stage 1 SC is very attractive. That's the one I test-drove and really liked it.

And like I said, let me know if you need another test car :-)

Vince@R/T · 02-19-2012, 10:20 PM

Quote:

Originally Posted by SAM@GTM

No They are not the GT mafs's Calibration from UPREV, as i have said that before in that same thread. Our calibration has much bigger sealing.

I was more so saying that they are not stock.

So to be clear you have that company make you custom MAf's to your specs? They way you worded it before you were saying that they are the same sensors...

02-17-2012, 03:54 PM	#1 (permalink)
Nissan370 Enthusiast Member Join Date: Feb 2011 Location: Baltimore Posts: 431 Drives: 2009 ST BLK 370Z Rep Power: 14	max hp and stock maf any high hp guys max the maf out yet on our cars just tring to get an idea at what hp lvl's we need new maf sensors. thxs __________________ 370z vsr motorsports single turbo/built motor 9.1cr 525rwhp/450rwtq @ 10.5psi (stock maf maxed out)

02-17-2012, 05:17 PM	#3 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	We didn't change the mafs until we went above 1000hp overtureZ likes this. __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

02-18-2012, 09:47 PM	#9 (permalink)
roplusbee A True Z Fanatic Join Date: Dec 2009 Location: Killeen, TX Posts: 2,360 Drives: 2007 350Z NISMO Rep Power: 23	Interesting.............. __________________ 2007 350Z NISMO #0618: Zerolift \| UPREV \| F.I. \| Greddy \| Competition Clutch \| Injector Dynamics \| Aeromotive \| Pioneer \| JL

02-19-2012, 04:57 PM	#13 (permalink)
Zat_Zuma A True Z Fanatic Join Date: Nov 2008 Location: Edmonton, Alberta ...eh Posts: 1,171 Drives: 2017 Touring auto Rep Power: 19	Thats what I like to hear __________________ [B]2009 & 2017 370Z Touring Sport Autos SOLD

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[WTB] WTT SoCAL: CF Spoiler for Stock SILVER & Front Bumper w/ Lip and Stash for Stock	Juan@AEperformance	Parts for sale (Private Classifieds)	6	01-10-2012 02:32 PM
Can i change my stock HID bulb on my 370z to a 6000k and keep the stock ballast?	MyYellow370z	DIY Section (Do-It-Yourself)	2	06-14-2011 11:47 PM
Swap TPMS from stock 18's to stock 19" Rays	CAN-ZED	Wheels & Tires	12	03-29-2011 08:58 AM
More agressive offset on stock wheel and stock height?	whoady4shoady	Nismo 370Z	3	02-07-2011 03:56 PM
SSR PROFESSOR MS1 2 IN STOCK, TYPE F 3 COLORS IN STOCK from AMPLIFIED MOTORSPORT	LOU@AMPLIFIED	Tires/Wheels	33	12-04-2009 07:35 PM

02-17-2012, 05:09 PM	#2 (permalink)
Boosted Performance The370Z.com Sponsor Join Date: Feb 2010 Location: Edmonton, AB Posts: 1,629 Drives: Z's Rep Power: 3382	Depends on the size of the charge piping that they are housed in. The MAF sensors in 2.75" charge piping will do about 600whp (DJ). If you go with 3" charge piping that number will go up.